Can I replace my own subfloor?

If your subfloor is in need of replacement, the damaged portion will need to be completely cut out. This also requires the removal of all floor covering over the problem area as well as the accompanying underlayment materials. The process for this portion of the job will vary based on the type of flooring you have.

Can you replace part of a subfloor?

If the water damage has been occurring for a while and there are signs of flaking wood or mold, the only option may be to replace the affected section of subflooring. Start by removing the finished floor (hardwood flooring may be reusable once it dries, so be careful in the removal process) and exposing the subfloor.

Can I put new subfloor over old subfloor?

Install a layer of at least ½” or preferably 5/8” ply over the existing planks. This is particularly important if your old sub floor has lumps and bumps in it. If you don't respect this thickness of ply, then you're highly likely to see rises and falls in your new flooring.

Do I need 2 layers of subfloor?

That's the usual approach. Almost no one puts down double-thick subfloor in residential applications (for cost and handling reasons), and both layers need to be fastened to joists. Only thin underlayment can be fastened just to the subfloor.

Do I need to replace water damaged subfloor?

The best choice for damaged subflooring is usually to have it replaced — especially if it is growing mold. In severe situations, it may feel like replacing the flooring is the only action you can take.

How to Remove and Replace a Rotten Subfloor

What size plywood is best for subfloor?

The spacing of the joists governs the recommended thickness of the plywood subfloor. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but you should use slightly thicker 3/4-inch plywood for joists spaced further apart.

Should I replace bathroom subfloor?

“Adequately protected from moisture, most subfloor materials can be expected to last for the lifespan of the home.” However, if the subfloor is consistently exposed to moisture, you may need to replace it after 20 to 30 years or sooner.

What kind of plywood do you use for subfloor?

Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.

How long does it take to install subfloor?

Cost to Install New Subflooring

The low estimate is based on using plywood and 4.5 hours labor at $25. The high estimate includes using Warmboard brand subfloor and 8.5 labor hours at $30.

How do you fix water damaged subfloor?

How much should I charge to replace subfloor in bathroom?

It costs approximately $3 to $10 per square foot to replace a subfloor, depending on the material you choose. Consider choosing a moisture-proof subfloor for bathrooms or basements.

How thick should a subfloor be?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

Does subfloor go under walls?

A subfloor is the solid base underneath the floor covering that you depend on for the stability of both the floor and walls in a room. Though it's not the main support system—that's the work of beams, posts, and joists—it does its fair share of the work.

What is the best subfloor material?

Plywood. Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

What is the difference between subfloor and underlayment?

Basically, subfloors are a structural part of your home that provide strength and rigidity to your home's flooring. Underlays, on the other hand, protect your floor covering from moisture, help soundproof your floor, and offer cushioning and comfort underfoot.

Will wet subfloor dry out?

If flooding occurs, and there is water leaking into the sub-flooring, it is crucial to dry out the subfloor as soon as possible. The first step is to absorb any water lurking on the surface of the floor. Then, place a dehumidifier at high settings to pull out any moisture that is still in the air.

Is it better to use OSB or plywood for subfloor?

OSB has a lower resale value than plywood due to its lower strength. For this reason, few homeowners prefer OSB in their homes. Apart from costs, plywood is superior in all the other areas, such as the strength of the structure. For this reason, it's a superior material for use on the subfloor.

How much does a 4x8 sheet of plywood cost?

The average cost of a 4×8 plywood.

The cost will vary depending on what size you are looking for. A 4×8 sheet that's 1/4 inch thick could cost you anywhere from $6 to $45, while an 11/32″ thicker one would run about $15 dollar to $120 per sheet of the same size.