Can I put a little bleach in my pool?

Bleach, like any other kind of pool treatment, is best used in specific concentrations -- that is, you'll want to be able to detect a certain amount of chlorine in your pool water. Too little, and you won't effectively sanitize your pool water and surfaces. Too much, and your pool water might become too harsh to use.

Can I use household bleach in my pool?

It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.

Can you put regular bleach in a small pool?

Many of us want to cool off in a backyard pool, but we also want to make sure there are no dangerous bacteria lurking in these pools that do not have any filtration system in place. You can use Clorox® Regular Bleach₂ to treat the water in a child's wading pool.

Can you put bleach in a vinyl pool?

High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.

How long after putting bleach in pool Can you swim?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.

Can Bleach Be Used In Swimming Pools?

How much bleach can I put in my pool?

If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.

Will bleach clear up green pool water?

You normally need 6 quarts of bleach per 10,000 gallons of water, so to kill algae, you might want to increase this to 8 quarts ( 2 gallons) per 10,000 gallons. If the pool water is very green and cloudy, consider doubling the basic dosage. Just remember to stay out of the water until the chlorine drops to safe levels.

Is Clorox bleach the same as pool chlorine?

In truth, bleach contains the same base chemical as pool chlorine. That chemical is, of course, chlorine, and the only major difference between the two products is the concentration strength. Pool chlorine typically contains some form of stabilizer, as well, though this is not a crucial factor.

Does baking soda clear pool water?

Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.

What does baking soda do to pool water?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.

Can you mix bleach and pool shock?

It Should Not Be Done Together

This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

Can I shock my pool with Clorox bleach?

Now you can know the gallons of bleach you would need to shock your pool as follows: use 0.5 gallons of Clorox per 10K gallons of water to increase the level of chlorine by 5 ppm. If you want to raise the level of chlorine by 2.5 ppm, then you would need ¼ gallon of the product per 10K gallons of water.

How often should I put bleach in my pool?

Once you've obtained a good reading, you can usually maintain your chlorine levels by adding chlorine tablets once a week. These dissolve more slowly and will keep your chlorine levels stable.

Will baking soda clear a green pool?

Will baking soda clear a green pool? No. Baking soda will only raise your alkalinity and pH levels and this will not kill algae. Chlorine is what kills algae.

Is pool shock the same as bleach?

Swimming pool shock contains 12.5% sodium hypochlorite (bleach) vs. 6-8.5% for Clorox (bleach). Some Clorox products go as high as 8.5%. At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than Clorox bleach.

What can I use instead of pool shock?

Common unscented household bleach (sodium hypochlorite) works well to shock a pool.

What happens if I put too much bleach in the pool?

Excess chlorine can alter the pH level of the water in the pool, making it more acidic. The acid levels can cause any of the following symptoms: Irritant dermatitis which is a red skin rash characterized by raised itchy red bumps. Eye irritation and over-dilated blood vessels in the eyes.

Does adding bleach to pool raise pH?

Bleach is basically ph neutral. It will raise the ph slightly when added but as the chlorine get used up, it will drop back down. Some of the cheaper stuff, and the higher concentration stuff have more lye, which will raise ph a little...but again, in most cases, ph neutral (long term).

How much bleach do I put in a 500 gallon pool?

In a clean, freshly filled 500 gallon wading pool, add a quarter cup of unscented household liquid chlorine bleach to the water. Then, at the end of each day, test the water and add an additional 1/8 to 1/4 cup, depending on the reading.

What can I use instead of chlorine in my pool?

How much bleach do you put in a gallon of water?

Mix 1 cup (240 mL) of bleach in 1 gallon of water. Wash surfaces with the bleach mixture. If surfaces are rough, scrub them with a stiff brush. Rinse surfaces with clean water.

How much chlorine do you put in a pool per gallon?

The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.

Can bleach replace pool shock?

Calculate the amount of bleach you need based on the fact that 1 gallon will raise the free chlorine level of 30,000 gallons of water by 2 ppm. If you need to mildly shock a 30,000-gallon pool by raising the free chlorine concentration to 5 ppm, you need 2.5 gallons of bleach. To raise it to 10 ppm, you need 5 gallons.