Can I power wash my deck before staining?

Taking your time is key to power washing a deck successfully. Now that the wood has been cleaned and stripped of grime, you can sand it and apply your stain of choice. Power washing a deck before staining will allow the wood to absorb the stain better and deeper.

Can I just power wash my deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

How long should you wait to stain a deck after power washing?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry. Now let's talk about specifics. Cleaning your deck is an all important first step in the staining process.

What happens if you don't clean deck before staining?

But don't just slap a coat of stain on in a hurry — you'll need to clean your deck before staining it. If you stain a deck without cleaning and prepping it first, the results will look blotchy, uneven, and, well, amateur. Any time you save skipping the cleaning stage, you'll spend twice over repairing the botched job.

Should you power wash or sand a deck first?

DO sand your deck before sealing. It can take up to 48 hours for the deck to fully dry. At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill.

How To Clean And Stain A Deck

How do you clean pressure treated wood before staining?

Wash the Wood

Allow it to dry before staining. Wash the pressure-treated wood with a deck cleaner, scrubbing the wood surface with a brush while wet. Use a pressure washer if the wood has tough stains. Allow the wet cleaner to soak into the wood for about 10 minutes or to manufacturer's directions.

Should you power wash a deck?

Ideally, power washing a wood deck will not ruin the wood and etch or erode the softwood fibers. However, when wood gets wet, the fibers may become raised, creating a rough surface. This is a particular problem on handrails, where the raised fibers can lead to splinters and require some sanding.

How do you prepare wood before staining?

Sand Thoroughly

The best way to stain wood is to prepare the wood surface by sanding it with a sanding block or orbital sander. Sandpaper with a lower grit number will make wood rougher, allowing more stain to absorb and creating a darker color.

How do I know if my deck is dry enough to stain?

Another way of checking if your wood is ready for stain is to pour a little water on the wood. If the water beads up, the lumber still too wet to be stained or painted. If the water is absorbed into the wood easily, it's ready to be sealed or stained.

What if it rains after I power wash my deck?

Rain really will not hurt unless the deck is wet when you seal it. If wet when sealed depending on the type of sealer it may be ok (water based) or with oil based it will not adhere as well.

How long does deck wood need to dry before staining?

New wooden decks should always receive a coat of paint or stain. Generally, all new decks should dry out for at least 30 days before stain or paint is applied. Although a finish can be applied immediately after construction, more work is involved, so it's best to let the wood fully dry before finishing.

Is 1800 psi enough to clean deck?

For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.

Do you have to remove all old stain before restaining a deck?

You do not ALWAYS have to strip off old stains when staining a previously stained deck if you are applying the same stain type, color, and brand as the old one. Since deck stains penetrate deep into the wood, they prevent moisture buildup and protect your deck from mold UV rays and rot.

Is it better to stain wood with a brush or rag?

The best way to apply stain is with a lint free rag and wiping it into the grain of the wood. Using a lint free rag is the best way to apply wood stain because it is great for controlling the amount of stain that is applied and for removing any excess stain.

Can you stain over stain without sanding?

Can you restain wood without sanding? While some light sanding may be advised for almost all stain projects, it is possible to avoid heavy sanding and stripping of existing stain. Using a gel stain means that you can avoid the heavy sanding and stripping usually required by traditional staining projects.

Should you sand your deck before staining?

Sand the Deck

If you plan to stain the deck, sand the surface before application to make the wood better absorb the coating. Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards. You may need to use a sanding sponge on the railings or balustrades.

Can you ruin a deck by pressure washing?

One of the quickest ways to do damage to your deck is by blasting it with a high-pressure power washer. Using too much pressure can scar the wood, leaving unsightly marks. Damage to the wood that weakens it in spots could eventually lead to structural damage.

Do not power wash deck?

Beware Pressure Washing Damage

If you have timber deck boards, a power washer's pressure may cause splintering and damage to the timber fibers. If the timber surface already has some splintering, pressure washing will only exacerbate the issue.

Does power washing remove wood stain?

By adding specialized pressure washer detergent, this tool becomes a powerful stain remover. Cleaning solutions can help you lift stains from aluminum siding, wood and vinyl siding, driveways and walkways, decks, paving stones, and other materials.

How long should pressure treated wood dry before staining?

Before you can stain, wait 72 hours for pressure-treated wood to dry completely if has been kiln-dried at the lumber yard. You can check the board for tags and ask the hardware store staff if it's already Kiln dried If not, it usually takes a few weeks to six months before you can stain.

Should I sand pressure treated wood before staining?

Sanding pressure-treated wood is actually contraindicated because, as Sand & Stain warns, you'll end up partially removing the protective coating created by the pressure treatment, and the wood will look terrible.

How soon can pressure treated wood be stained?

It's important to wait until your pressure-treated wood is completely dry before applying stain, as the chemicals used to treat the wood often leave additional moisture behind. Drying times range anywhere from a few weeks to a few months, depending on such factors as weather and climate.

Do I need to sand my deck after power washing?

Deck sanding – this task is essential when it comes to the maintenance of your deck, especially after cleaning it or before staining/sealing it.

Do you need to sand after pressure washing?

After pressure cleaning, sometimes sand is blasted out of place. Re-sanding is recommended where necessary. Most people think that the sand needs to come all the way to the surface. Sand is securing the pavers together and does not need to be seen to do its job.