Can I drive with a broken pulley?

So, how long can you drive with a bad idler pulley? The safety recommendation is not to drive the car at all and take it to a mechanic immediately. You should be concerned if the vehicle makes squeaking or rattling noises. The car can still run for months or break after a few days.
Takedown request   |   View complete answer on carfromjapan.com


What happens if a pulley breaks?

Squealing noise

Because of this two things can happen. First, the pulley can get stuck and interrupt the motion of the belt. Second, the belt may fall out of place and rub against the surface of the pulley. In either of these cases, the bad pulley will produce a loud squealing noise that is hard to miss.
Takedown request   |   View complete answer on ecodrivingusa.com


Can you drive with a broken tensioner pulley?

Driving with a bad belt tensioner is unsafe since the tensioner is meant to guarantee ample tension that powers accessories. Wear on the belt tensioner will eventually cause the belt to slip, generate loud noise, and also create an unsafe level of heat along the accessory pulleys.
Takedown request   |   View complete answer on autopartsu.com


What happens if tensioner pulley breaks?

When the tensioner or tensioner pulley fails, the loss of tension can cause the belt and pulleys to make high-pitched rattling or chirping noises. If the pulley bearing completely fails, it can also cause a squealing or even a grinding noise.
Takedown request   |   View complete answer on yourmechanic.com


How much does it cost to replace a pulley on a car?

The cost to replace the idler pulley of your driver belt will usually be somewhere between $80 and $200. The cost for the new part should only be anywhere from $40 to $90, while the cost of the labor will be anywhere from $40 to $110. These prices do not include added taxes and fees charged by the auto shop.
Takedown request   |   View complete answer on cartreatments.com


Pulley Problems: Diagnose Noise Under Your Truck / Car's Hood!



What causes a pulley to break?

Improper Tension

If a belt is not tensioned properly, it will ride too loose or too tight on the pulley. A belt that's too loose on a pulley will cause slippage, which leads to heat build up from friction. This heat will damage your rubber belts and cause the belts to crack and break.
Takedown request   |   View complete answer on dreisilker.com


How long does it take to replace a pulley?

If you are doing the job at home, give yourself about four hours to change all the parts. You will need the following tools and parts: Replacement idler pulley.
Takedown request   |   View complete answer on premiumautoproducts.com


Can you drive without an idler pulley?

So, how long can you drive with a bad idler pulley? The safety recommendation is not to drive the car at all and take it to a mechanic immediately. You should be concerned if the vehicle makes squeaking or rattling noises. The car can still run for months or break after a few days.
Takedown request   |   View complete answer on carfromjapan.com


What happens if idler pulley fails?

A broken or seized pulley can quickly lead to a torn belt, or in less serious cases, the belt falling off of the engine. An engine without a belt can quickly run into issues such as overheating and stalling, as it's the drive belt that allows the engine accessories to function.
Takedown request   |   View complete answer on yourmechanic.com


How long can a car run without serpentine belt?

There are a couple of factors influencing the answer to this question, but on average, your car should be able to run between 20-90 minutes with a broken serpentine belt. The engine will overheat faster without a functioning cooling system on a hot day, so your driving window is less.
Takedown request   |   View complete answer on repairsmith.com


How do I know if my pulley is bad?

With that being said, here are a few of the most common symptoms you can use to determine the condition of your timing belt pulleys.
  1. Shaky, or Otherwise Incumbered Belt Motion. ...
  2. Visible Wear On Your Pulleys. ...
  3. Belt “Squealing” or “Whining” Noises. ...
  4. Knocking or Slapping Noises. ...
  5. Damaged Bearings or Pulleys.
Takedown request   |   View complete answer on illinoispulleyandgear.com


What does a pulley do on a car?

Its primary function is to provide tension and guide the engine drive belt. These belts wrap around the various parts of the engine such as the power steering pump, alternator, water pump etc... To keep it simple, idlers are complementary pulleys that make the entire system run smoothly.
Takedown request   |   View complete answer on ferberstireandauto.com


Can a bad pulley cause loss of power?

Technically speaking, yes, an idler pulley will result in a slight power loss.
Takedown request   |   View complete answer on amortips.com


How much does it cost to replace a pulley and serpentine belt?

The Average Cost to Replace a Serpentine Belt Is $58 to $126 Depending on if You Go to the Mechanic or DIY. This price range is based on national averages for all vehicles and does not factor in taxes, fees, or your particular make and model. Related repairs or maintenance may also be needed.
Takedown request   |   View complete answer on fixdapp.com


How long can you drive with squeaky belt?

That's why it's recommended that the serpentine belt is replaced early when the squealing symptoms are first noticed. Although it may be safe to drive with the squealing for a few days or weeks, the belt will eventually need to be replaced, and for safety, the earlier it's repaired, the better.
Takedown request   |   View complete answer on hollenshades.com


Can a bad idler pulley cause alternator problems?

All that happens when the belt disappears or pulleys seize is the alternator stops turning; there is NO possibility of damage to the alternator.
Takedown request   |   View complete answer on yourmechanic.com


What's the difference between tensioner and idler pulley?

The primary distinction between tensioners and idler pulleys is the presence of an adjustable bolt. Tensioners are positioned on the bolt through mounting. Idler pulleys are not mounted to an adjustable bolt.
Takedown request   |   View complete answer on autopartsu.com


How long does a tensioner pulley last?

The Owner's Manual Says that It is Time

Most modern cars that roll off the dealer's lot as a new vehicle will have a 60,000 to 100,000-mile life expectancy for the serpentine belt, tensioners, and idler pulleys.
Takedown request   |   View complete answer on autopartsu.com


When should I replace pulleys?

An idler pulley is expected to wear over time, and eventually the pulley will fail. Replacement intervals for idler pulleys vary, but are usually within the 50,000 to 100,000 mile range. Replacement often coincides with expected serpentine/accessory belt replacement periods.
Takedown request   |   View complete answer on parts.olathetoyota.com


How do you change a pulley?

Loosen the bolt and push the pulley toward the center of the engine to relieve the tension on the belt. Slide the belt off the idler pulley. Hold the idler pulley so it cannot turn and loosen the center bolt with a socket wrench. Remove the bolt completely and pull the idler pulley from the engine.
Takedown request   |   View complete answer on itstillruns.com