Are 285 tires considered 33s?

YES, 285 wide tires are the same as 33” tires although 285 is the tread width in millimeters and 33″ is the tire diameter. 285/75/16 is usually the accepted metric equivalent size for 33's.
Takedown request   |   View complete answer on 4wheeldriveguide.com


Are 285 70R17 33s?

For reference, we are using the 285/70R17 Yokohama Geolandar X-AT which is a true 33″ tire measuring out at 33.1″. The X-ATs have a diameter of 33.1″, a width of 11.7″, comes in a load range E, and mounts up to a 7.50″ – 9.00″ wide wheel.
Takedown request   |   View complete answer on trailtacoma.com


What does 285 mean on a tire?

The “285” on our LT tire stands for section width or tread width, which, simply put, is the distance from sidewall to sidewall, measured in millimeters. So our LT tire section width of 285 millimeters, which equates to a width of tread of 11.22 inches.
Takedown request   |   View complete answer on off-road.com


How tall is a 285 tire?

The sidewall height or "aspect ratio" of a 285/75/R16 tire is 75% of 285mm. Example: 285/75R16 (285 X 75 / 2540 x 2) + 16 = 32.8 inches tall.
Takedown request   |   View complete answer on tiresize.com


What tire size is equivalent to 33x12 5x20?

But if we have to choose from the actual metric tire sizes, the closest equivalent would be 325/50R20.
Takedown request   |   View complete answer on tiresdoc.com


33's vs. 31's: Here's What I've Noticed



Is a 285 and a 33 inch tire the same?

YES, 285 wide tires are the same as 33” tires although 285 is the tread width in millimeters and 33″ is the tire diameter. 285/75/16 is usually the accepted metric equivalent size for 33's.
Takedown request   |   View complete answer on 4wheeldriveguide.com


How do you tell if your tires are 33s?

A standard sized tire will be displayed in inches. A tire that reads 33 x 12.5 R15, is 33-inches in diameter (or tall), 12.5-inches wide, and will fit a 15-inch wheel. The door jam of your vehicle will also indicate what size tires the manufacturer recommends.
Takedown request   |   View complete answer on popularmechanics.com


How much of a lift is needed for 33s?

Most IFS vehicles require a minimum of 2.5 to 3-inch lift with additional trimming of fender liners and body mounts to accommodate a 33” tire. A Solid Front Axle vehicle can accommodate a 33'' tire easier with fewer modifications. Fitting bigger tires is the single most effective way of improving ground clearance.
Takedown request   |   View complete answer on 4wheeldriveguide.com


Are 295 tires the same as 33?

295/70/17 is actually about 3/4 inch taller than most 33's as the former will measure around 33.3" and the latter 29.5".
Takedown request   |   View complete answer on wranglerforum.com


How tall is a 285 75R17 tire?

285/75R17 tires have a diameter of 33.8", a section width of 11.2", and a wheel diameter of 17". The circumference is 106.2" and they have 596 revolutions per mile. Generally they are approved to be mounted on 7.5-9.5" wide wheels.
Takedown request   |   View complete answer on tiresize.com


What do 33 inch tires mean?

The first number is your overall diameter of the tire. In this example the tire diameter or "height" is 33 inches tall. The second number represents the width of the tire. In most cases with inch measurement tires the width will have a . 50 decimal after the initial number.
Takedown request   |   View complete answer on tiresize.com


Can you fit 33s on a stock Silverado?

Generally most newer Chevy Silverado pickups can fit 33 inch tires with just a leveling kit. If you want to fit 35 inch tires a lift is more likely to be required.
Takedown request   |   View complete answer on pschevy.com


What is 285 70R17 in inches?

When we convert 285/70R17 to inches, it is equivalent to 32.8x11. 2R17. Let us break down the tire size dimensions for better understanding. 11.2 inches or 285 mm stand for section width, or width of the tire tread.
Takedown request   |   View complete answer on tireconverter.com


How wide is a 285 75R16 tire?

What is 285/75R16 tire width? 285/75R16 tire has a width of 11.2 inches or 285 mm that reflects the measurement of tire's width from its inner sidewall to its outer sidewall at the widest point (excluding decorations, protective ribs or raised letters).
Takedown request   |   View complete answer on tireconverter.com


What size tire is 285 65R20?

When converted to inches, 285/65R20 is equivalent to 34.6x11. 2R20. 285/65R20 tire has a section width of 11.2 inches which is the measurement of tire's width from its inner sidewall to its outer sidewall.
Takedown request   |   View complete answer on tirecalculator.com


What is the biggest size tire for a stock Silverado 1500?

If you are modifying a Chevy Silverado 1500 with its stock suspension to have bigger tires, the largest size you can use is 33.5-inch by default. The factory standard tire size is 31.6 inches for this truck model, noted as 265/65/R18. The 33-inch size tires are noted as 275/60/R20.
Takedown request   |   View complete answer on vehq.com


Will bigger tires hurt my transmission?

This includes the drivetrain, transmission, brake system, and all the associated parts within those systems. This can also affect your odometer and speedometer as larger tires will have a larger circumference, causing you to travel a little bit further per each complete tire rotation.
Takedown request   |   View complete answer on aamcocolorado.com


What size tires fit on a stock Silverado?

The factory standard size tires on a Silverado are 31.6 inches, these are 265/65/R18 tires. If you want to go up to 33 inches, you will need to use 275/60/R20 tires.
Takedown request   |   View complete answer on vehiclefreak.com


What is the difference between 285 70R17 and 285 75R17?

Registered. 285/75/17 is approximately 11.22" wide x 33.83" tall. The 285/70/17 is going to measure 11.22" wide x 32.708" tall. The tires that you are getting are going to be 1.122" smaller (height).
Takedown request   |   View complete answer on titantalk.com


Which tire is bigger 285 or 295?

The only difference here is the overall diameter, the 285 being just under 33" and the 295 being 33.3". The width is different by . 1 inch so no difference there.
Takedown request   |   View complete answer on gm-trucks.com