Should you put bleach in your well?

Disinfecting Your Water

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

Is it safe to put bleach in a well?

You can disinfect your well with household chlorine bleach, such as Javex®. Use fresh chlorine bleach to ensure an effective disinfection of the well. Chlorine can evaporate and lose half of its strength in 6 months. Don't use scented bleach, to avoid adding extra chemicals to your water.

How often should you chlorinate your well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria.

Why do people put bleach in wells?

Shock chlorination is the process by which home water systems such as wells, springs, and cisterns are disinfected using household liquid bleach (or chlorine). Shock chlorination is the most widely recommended means of treating bacterial contamination in home water systems.

How much bleach should I put in my well water?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach - (4 quarts in a gallon). Do not use excessive amounts of bleach - more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.

Shocking well with bleach (DIY)

How long after bleaching well Can I drink water?

Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER. CONTACT WITH THE WATER MAY CAUSE SKIN, EYE AND NOSE IRRITATION. 12.

How long after bleaching well can I shower?

Step 6 WAIT at least 12 hours before turning faucets back on. Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

What is a natural way to clean well water?

You can boil the well water for 5 minutes. With this, all the bacteria inside it will be eliminated. However, boiling will not be able to remove the solids and other materials inside the well water. The use of chlorine drops or iodine tablets can effectively kill the bacteria in the well water.

Is shocking a well Necessary?

Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.

How much does it cost to chlorinate a well?

To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 - $200.

Do you need to chlorinate well water?

Well water doesn't go through a water treatment plant like municipal water. That means it might contain contaminants like volatile organic compounds, coliform bacteria, lead, and other toxins. Municipal sources disinfect their water with chlorine, so you need well water chlorination to fill that role.

How long can you leave bleach in a well?

Mix the bleach with the well water.

Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.

Can I put Clorox in my well?

Disinfecting Your Water

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

What happens if I put too much bleach in my well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

How do I fix brown water in my well?

How do you keep whites white with well water?

There are a couple of alternatives to get your whites white. Wash your whites with regular detergent, add 1/2 cup of hydrogen peroxide or a scoop of borax to each load, and line dry them in the sun. You can also purchase a product called Iron Out and add it to the rinse cycle after using bleach.

What does it mean when your well water turns brown?

If your area has received more rainfall than usual, brown well water can result from rusty plumbing, rainwater runoff contamination, or septic cross-contamination.

Can I put vinegar in my well?

The well has been flooded or exposed to bacterial contamination in another manner, such as a crack in well cap. Liquid chlorine in the form of household bleach and food grade white vinegar can be used to disinfect your well.

Does shocking a well help with iron?

With shock chlorination, the entire system (from the water-bearing formation, through the well bore and the distribution system) is exposed to water that has a concentration of chlorine strong enough to kill iron and sulfate-reducing bacteria.

How often should a well be cleaned?

9. As a routine maintenance practice, clean your well at least once a year. If you have an iron or sulfur bacteria problem, clean more often.

How do you bleach a well water system?

Overview. Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

Will bleach hurt a well pump?

WARNING. ► If your well has not been disinfected for many years, it may have considerable scale built up. Disinfecting with a strong chlorine solution can dislodge this scale and plug or damage your pump, and/or cause problems elsewhere in the plumbing system.