Is faced insulation better than Unfaced?

Faced just means that kraft paper is attached to the insulation itself. The paper helps improve the sturdiness of the insulation so it doesn't fall down as much. Unfaced insulation is just as good as faced, but it doesn't have that paper attached to it.

Should I get faced or unfaced insulation?

Unfaced insulation is great for new construction, remodels, walls, floors, ceilings, basements, attics and crawlspaces. It's best used for interior wall applications that do not face the outside and also in rooms that don't need moisture control, like living rooms, dining rooms and studies.

Does it matter if insulation is faced?

To be effective, the barrier's reflective surface must always face an air space at least an inch thick and be installed shiny side up if laid on the attic floor, shiny side down if attached to the rafters. Tests show that a radiant barrier in an insulated attic can lower attic temperatures by as much as 30 degrees.

What is the advantage of faced insulation?

Faced insulation has a vapor barrier or a vapor retarder (the facing) that helps prevent moisture from moving from one space to another. The facing also helps protect the surface, hold the insulation together and fasten the material to building components.

When to used Faced vs unfaced insulation?

However, it's common for a layer of faced insulation to be used in the exterior walls and attic ceilings to prevent water from entering the home, while unfaced insulation can be added to improve the heat retention ability and reduce the risk of fire.

When to Use Faced or Unfaced Insulation

When Should faced insulation be used?

Insulation in rolls, called batts, comes in two varieties: faced and unfaced. Faced, or the type with paper, is typically used in first-time applications, such as in walls, ceilings, floors, and in crawl spaces. Any time you use a faced insulation, the paper needs to be facing toward the living space.

Should I use faced or unfaced insulation in attic?

Faced Insulation: If the attic doesn't have any existing insulation, use faced insulation with the paper facing toward the heated living space. Unfaced Insulation: When adding more insulation to an attic that already has insulation, use unfaced insulation.

Do I need a vapor barrier if I use faced insulation?

Since vapor barriers are only additional protection and not required to finish faced insulation, they are not always necessary. In fact, in some parts of the United States, it is better to not add vapor barriers as they can do more damage than good to your insulation.

Should I use faced insulation in my attic?

Attic Floor Insulation

Unfinished or uninsulated attics need a layer of protection to keep hot or cold air from migrating to the rest of your home. If you install batting between your attic floor joists, the material should be faced.

Does faced insulation need to be stapled?

INSTALLING FACED INSULATION WITHOUT USING STAPLES

Make sure the insulation facing is flush with the face of the stud. The insulation must fit snugly at the sides and ends. Some CertainTeed products, such as SpeedyR, are prodcuced without stapling flanges specifically to be friction fit, and do not need to be stapled.

Can you put unfaced insulation over faced insulation?

No, faced insulation should not be added over existing insulation since the vapor retarder on top of or between layers of insulation can trap moisture. Let Accurate Insulation handle your home insulation project from start to finish.

What insulation should I use for exterior walls?

Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces. See the Department of Energy's (DOE) ranges for recommended levels of insulation below.

What happens if insulation is installed backwards?

So if it is installed upside down, the paper moisture barrier can actually keep moisture in-between the paper and the sub-flooring. This can lead to mold issues, as well as structural deterioration. Also, the paper is flammable so not properly installing it can create a fire hazard.

Can you have too much insulation in your attic?

It's possible to over-insulate an attic as too much will cause moisture buildup and eventually result in mold. Eventually, adding more insulation leads to diminishing returns in trapping heat as well.

How should faced insulation be installed?

Regardless of whether fiberglass insulation is installed in a wall, attic, or crawlspace; the paper facing should always face toward the inside of the home. That's because the paper contains a layer of asphalt adhesive which prevents water vapor from passing through it.

Which side of insulation faces out?

The first layer should have the facing against the drywall to act as a vapor barrier. (The general rule for insulation is that the facing always goes toward the conditioned space.) The second layer of insulation should be unfaced so that moisture doesn't collect between the layers.

Which insulation is best for attic?

Many people consider fiberglass batt to be the best attic insulation. It consists of plastic reinforced by small glass fibers. The batt version comes in blanket form — i.e., small, pre-cut sections that you can lay down wherever you need to.

Can I put plastic sheeting over faced insulation?

More than likely, installing an additional layer of poly over kraft facing won't cause any problems — it's no more risky than if the wall had only unfaced batts and poly — and the risk of using poly on the interior is relatively low in a cold climate like New York's.

Do you tape Kraft faced insulation?

In all cases, it is only worth taping faced batt insulation. The term "faced" means that the batt has foil, paper, or other thin continuous material on one side of the fluffy batts. Without this facing, the tape will not stick well and would not add any sort of advantage to your insulation assembly.

Should I use faced or unfaced insulation in basement?

Faced insulation is crucial in attics, exterior walls, ceilings, and crawl spaces. If you're simply adding a fresh layer of insulation to lower your energy bills, unfaced insulation should suffice.

What insulation should I use in my garage ceiling?

Fiberglass Insulation

Fiberglass is the most commonly used type of insulation in garages (just as it's the most popular type in homes). It's sold in precut batts and long blankets that fit between wall studs and ceiling joists.

Can faced insulation be used on interior walls?

In addition, insulation comes complete with a vapor barrier/retarder. A Faced Insulation is stapled onto the framing with the paper side facing the home's interior to install it. The faced should always be against the drywall as the drywall will be the interior side.

Can you put plastic over insulation in attic?

Plastic isn't recommended in this situation because it would create a second vapor barrier that can trap moisture and result in condensation and mold. Craft paper would have the same problem, this is what is most likely on the other side of the insulation for the vapor barrier you want.