Do you need scaffolding to replace ridge tiles?

Roofing repairs do not always need to be done by a professional but they nonetheless pose difficulties when it comes to both access and safety. Much of the official health and safety advice states that, for any domestic roof repairs, scaffolding is needed.

When should you use scaffolding?

If your construction project is likely to take more than one or two days – particularly if you are working in adverse weather conditions – then scaffolding is advised. When working on an unfinished roof, it can also help to have scaffolding in place to protect the roof, tools and materials from the elements.

How do you install ridge tiles?

The ridge tiles should seal the top of the roof and overlap onto the slates/tiles on each side by at least 75mm. for slate and flat faced tiles this is achieved by using a fairly stiff 1:3 (cement: sharp sand) mortar bed along the tops of the tiles/slates.

Will a missing ridge tile cause a leak?

In a nutshell: yes. Any missing, displaced, or broken ridge tiles may be responsible for a leaky roof. You might not be able to see a hole or any other visible signs of damage. However, if rain can get in, then you're in trouble.

How do you replace a ridge cap?

Repairing Ridges Tiles!

Do ridge tiles have to be mechanically fixed?

All ridges and hips must be mechanically fixed if bedded with mortar or dry-fixed systems used. It is no longer sufficient to use mortar as the only means of fixing tiles and fittings to roofs.

Should there be gaps between ridge tiles?

There should be no gaps a good bed of cement should have been put in and ridges should have no gaps if dry ridge they should be tight together with unions.

Why do ridge tiles blown off?

It's more likely that the roofer who installed them didn't use the correct sand and cement mix, as it seems to be a lost art these days. Ridge tiles will only blow off if the mortar has already failed.

Is it illegal to work on a roof without scaffolding?

Whilst it isn't illegal to work on domestic roofs and chimneys without scaffolding, health and safety regulation strongly recommends the use of appropriate roof and chimney scaffolding. For larger jobs on sloping roofs, HSE recommends the use of roof scaffolding to prevent people or materials from falling.

At what level in construction is scaffolding required?

In the general industry, the height requirement for scaffolding is 4 feet above a lower level. For construction work, the height requirement is 6 feet above a lower level. All workers 10 feet above a lower level must have fall protection.

Is it the law to have scaffolding?

Scaffolds which encroach over the highway (including pavements) require a license under Section 169 of the Highways Act 1980, which are issued by the local Highway Authority. Scaffolds should never be erected or dismantled over people or busy pavements.

How do you walk on roof tiles without breaking them?

What's the difference between hip and ridge tiles?

on the type of tile profile being used (Capistrano, Malibu, or Flat) rake, hip, and ridge pieces can be different. Ridge – The uppermost, horizontal external angle formed by the intersection of two sloping roof planes. Hip – The inclined external angle formed by the intersection of two sloping roof planes.

Should roof tiles be cemented down?

The vast majority of ridge tiles are fixed to the roof by cementing them in (but note that since 2015 building regulations have changed so that now all roof tiles need to be mechanically fixed even if cemented), though there are some "dry" ridge tile systems available.

Can you cement ridge tiles in the rain?

2 Answers from MyBuilder Roofers

providing it is dry up to a few hrs after the cement is is laid it should be able to withstand average rain fall.

How are dry ridge tiles fixed?

The dry ridge system simply involves fixing ridge and hip tiles to a roof without sand or cement mortar, but instead with screws and clamps, which fix each ridge tile to the roof, with waterproof unions beneath the screws to divert water away from the join.

Do you have to scribe ridge capping?

It's a requirement for all roofs in. Here's one of the VPR boys giving us a quick demo of 'Scribing' - the process of cutting the ridge capping to suit the profile of the roof sheets to prevent wind driven rain from entering the roof under the… More. It's a requirement for all roofs in Queensland!

Can you walk on roof tiles?

It's always wise to avoid ever setting foot on your tiled roof if possible. Although the answer to “can you walk on a tiled roof” is yes, that doesn't mean that it's something that should be encouraged on a regular basis. If there is an alternative way to achieve your goal, you should always take it.