Why does my hot tub water look cloudy?

Causes of cloudy hot tub water. When it comes to cloudy water, it's likely one of a few culprits — high pH, high alkalinity, and low sanitizer. Dirty filters, body care products, and old water can also be responsible for cloudy water.
Takedown request   |   View complete answer on masterspas.com


How do I clear up cloudy water in my hot tub?

How to fix and clear cloudy hot tub water
  1. Check your filter(s). This is your first point of call with any water quality problem, especially when clarity is an issue. ...
  2. Check the water balance levels. Your second point of call is the water balance. ...
  3. Shock the spa. ...
  4. Try a clarifier. ...
  5. Last resort, empty the spa.
Takedown request   |   View complete answer on happyhottubs.co.uk


How long does it take for cloudy hot tub water to clear?

It takes an average of 24 hours for cloudy hot tub water to be restored to a clear state by either using a hot tub clarifier or by hyper-chlorinating the water. However, in severe cases, a drain, clean, and refill may be necessary.
Takedown request   |   View complete answer on hottubownerhq.com


Why does my hot tub water get cloudy?

The most likely cause for your cloudy water is either due to high usage, an inadequate amount sanitizer, or both. Luckily, the fix is simple. Whether you use bromine or chlorine, add the recommended dosage and allow it to filter.
Takedown request   |   View complete answer on peoplelikeclearwater.com


Is hot tub water supposed to be cloudy?

The water in your hot tub should always be sanitary and crystal clear. If it isn't, it means that there is a problem. Cloudy water is typically the result of either a chemical imbalance or the result of bacterial growth.
Takedown request   |   View complete answer on hydropoolhottubs.com


How to fix cloudy hot tub water in three easy steps!



Will chlorine clear up a cloudy hot tub?

Shock the water

A proper sanitizer level will help destroy the particles that are causing the cloudy water. After balancing your hot tub chemicals, add a non-chlorine shock to the water. You should shock your water at least once a week or with increased use.
Takedown request   |   View complete answer on masterspas.com


Does high pH cause cloudy water?

Improper pH levels can affect your chlorine and the other chemicals in your water. High levels of pH can cause calcium build-up and scaling which leads to cloudy pool water.
Takedown request   |   View complete answer on swimuniversity.com


Will low pH cause cloudy water?

The pH of a pool should be between 7.2 and 7.8, with 7.6 being the ideal balance. Levels below 7.0 indicate acidic water. Levels above 7.8 mean that the water is too alkaline or basic. Both instances can lead to a cloudy pool.
Takedown request   |   View complete answer on homedepot.com


What happens if you put too much shock in a hot tub?

You only need a small amount of chlorine to successfully sanitize your spa, so it's possible to overdo it if you're not careful. Too much chlorine can damage your hot tub and irritate your skin, eyes and lungs. Thankfully, reducing the chlorine levels in your hot tub is very easy to do.
Takedown request   |   View complete answer on thermospas.com


Can you shock a hot tub twice a day?

A shock treatment takes care of this problem by oxidizing the organics in the water before they can feed the bacteria. It also helps get rid of sanitizer residue that remains after the sanitizer has done its job. Generally it is recommended that you shock your hot tub once a week – more often if it's seeing heavy use.
Takedown request   |   View complete answer on thecoverguy.com


What color should hot tub water be?

Every hot tub owner's nightmare: you move the cover lifter to your hot tub and discover a water colour other than clear blue. Whatever the colour, ranging from any shade between the colours of the rainbow, can only mean trouble if it's not clear blue.
Takedown request   |   View complete answer on bchomeleisure.com


Can too much chlorine cause cloudy water?

Excessive levels of pool chemicals can cause your water to become cloudy. High pH, high alkalinity, high chlorine or other sanitisers, and high calcium hardness are all common culprits.
Takedown request   |   View complete answer on mrpoolman.com.au


Should I shock my hot tub after every use?

Regular hot tub shocking is inevitable to keep your water clean and safe for use. Dead skin and other elements like hair may end up dropping in the hot tub, leaving the tub in a mess. It is essential to shock the hot tub frequently – at least once every week.
Takedown request   |   View complete answer on springdancehottubs.com


Will baking soda clear a cloudy pool?

Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.
Takedown request   |   View complete answer on poolandpatiopros.com


Does high alkalinity cause cloudy pool?

High Total Alkalinity

A high-pH environment can result in high calcium levels, making the water cloudy or causing “scale,” a hard, crusty mineral build-up. Too-high levels of alkalinity can also result in green water (Algae). It can reduce the effects of the chlorine you use to keep algae under control.
Takedown request   |   View complete answer on trojanpoolservices.com.au


Will low chlorine cause cloudy water?

Low chlorine level is the primary cause of cloudy water. Firstly, ensure that pH is stable between 7.4 and 7.6, and then balance your free chlorine to read 3 ppm; combined chlorine should be at 0 ppm.
Takedown request   |   View complete answer on dengarden.com


Is it okay to swim in cloudy pool water?

For the most part, yes. It can be unattractive and it should be addressed, but it is mostly safe to swim in cloudy water. The only exception would be if the pool is cloudy because there are too many chemicals in it. This pool water would be unsafe to swim in and should be avoided.
Takedown request   |   View complete answer on ownthepool.com


Why did my pool get cloudy overnight?

Some of the more common reasons a pool will turn murky include low or no chlorine, combined chlorine, water balance issues, poor circulation, filtration problems, weather events, and increased swimmer use.
Takedown request   |   View complete answer on lesliespool.com


What if I put too much chlorine in my hot tub?

If the chlorine levels are too high, you can either wait it out and let the chlorine break down naturally or replace some of the water in your hot tub with fresh water. You can also use a chlorine neutralizer to quickly eliminate excess chlorine.
Takedown request   |   View complete answer on wikihow.com


How often should you change hot tub water?

With average use, your hot tub should be drained and refilled about once every three or four months.
Takedown request   |   View complete answer on crystalpoolsinc.com


Does baking soda clean hot tub water?

Simply sprinkle one ounce of baking soda into your hot tub's water and put the jets on for twenty minutes. Then test the water's pH level to ensure it is at safe levels for soaking.
Takedown request   |   View complete answer on hottubownerhq.com


How often should you add chlorine to a hot tub?

You should put chlorine in your hot tub at least once a week. However, some people prefer to add a small amount after each use. Finding the best water care routine will depend on how often and how many people use it. Chlorine levels should be between 1.5 and 3.0 ppm.
Takedown request   |   View complete answer on masterspas.com


How can I make my pool water clear naturally?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.
Takedown request   |   View complete answer on armandhammer.com
Previous question
Is coconut apple edible?
Next question
Where does fibromyalgia start?