Which is better 10w30 or 15W-40?

High quality 10W-30 oils can perform as well, and better than industry-standard 15W-40 oils. The stated viscosity of a HDEO does not represent an exact viscosity, but rather a viscosity within a range on the SAE viscosity scale. Engine Oil viscosity is measured in centistokes (cST) at 100°C.

Can you run 15W-40 instead of 10w30?

Lower viscosity is easier to pump and to shear. This is why many heavy-duty oils are moving from the traditional 15W-40 to 10W-30. If the engine is designed and manufactured to use a 10W-30, it can improve fuel economy and power over using a 15W-40.

Is 15W-40 oil thicker than 10w30?

While the viscosity of a heavy duty engine oil accounts for its contribution to fuel economy, it is the composition of the base oil and additives that protect your engine from wear, soot and acid. Since 10W-30 is thinner than 15W-40, its film strength can be weaker and it can be more prone to oxidation.

Is 10W-40 better than 15W-40?

A 10w40 oil will be thicker in the cold than 15w40 oil, but they will have the same viscosities at higher temperatures. So during the cold season 15w40 being the lighter weight engine may provide better fuel efficiency provided that the engine can sustain thinner and lighter oil.

When should I use 15W-40 oil?

ADVANTAGE 15W-40 HEAVY DUTY DIESEL ENGINE OIL can be used with complete success in over-the-road diesel trucks, off-highway diesel equipment, farm tractors, and passenger cars and light trucks with diesel, turbo-charged diesel engines, or gasoline engines and is backward compatible with previous API Oil Categories.

Qual oleo usar no motor? 0w30 , 5w30, 10w30, 15w40 20w50

Is 15W-40 good for winter?

Even without a block heater, our recommendation is to stay with 15W40. The oils are very well formulated and flow at very low temperatures. If running short-haul, say in the Dakotas, you might want to switch to 10W30 year-round.

Is 15W-40 good for gas engines?

Mobil Gas Engine Oil 15W-40 is a premium fleet engine oil specifically formulated to provide reliable protection for trucks and buses using Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG). Mobil Gas Engine Oil 15W-40 is formulated from high quality base stocks and a balanced additive system.

What is best oil for high mileage cars?

Which is better 10W40 or 15w50?

At low temperature the 10W oil will flow better than a 15W oil. So the 15W-50 oil is “thicker” at cold temperatures than the 10W-40, therefore it will flow worse on start up; but being a little “thicker” it and maintains its viscosity at high temperatures better than the 10W-40.

What does 15W-40 mean in oil?

What does 15W-40 mean? 15W-40 viscosity grade means it flows like a 15 weight oil from start up in Winter, but provides the protection of a 40 weight once the engine reaches full operating temperature.

Can I mix 15W-40 with 10W30?

you can mix the two without a problem, for Wisconsin, the 15w 40 would be a better oil in the summer and 10w 30 would be a better oil for the winter, if you drive the car in the winter! I have Rotella 15w40 weight oil in my LT-1 now and I just found a place that sells 10w30 which would be a better choice.

Which engine oil viscosity is best?

The smaller the number, the better it will flow. A 5W-30 will flow easier than a 10W-30 at start-up temperatures and a 10W-30 will flow more easily than a 10W-40 at normal engine operating temperatures. Engine oil viscosity is important. Engine oils naturally thicken as they cool and thin as they are heated.

Can I use 15w50 instead of 10W30?

One is not better than the other. One is more viscous than the other. 10/30 is thinner than 15/50. Only use the one that is recommended for your vehicle.

What can I use instead of 10W30?

According to API motor oil guide [1], If you are using 10W–30, you can safely switch to 5W–30 (in car engines). 5W–30 is thinner than 10W–30 when cold. (you must follow the manufacturer's recommendations). However, switching from 5W–30 to economical 10W–30 is not always recommended.

What's better 10W30 or 10W40?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

Which is thicker 15W-40 or SAE 30?

Next, while hot, 15w40 will be thicker or have a higher viscosity than SAE 30. This is shown by the rating of 40 versus 30 between the two oils. When the engine is warmed up, SAE 30 will flow more easily than 15w40 would.

Which oil viscosity is better for warm climates?

A climate that experiences warmer temperatures all year long may necessitate a heavier engine oil such as an SAE XW-30 or XW-40 grade - one able to resist the breakdown that comes with higher operating temperatures by ensuring proper and adequate film thickness and the protection of critical engine components.

Can you mix 15W-40 and 10w40?

There is absolutely no harm in mixing different grades of engine oil! All motor oils are required to comply with international standards which include a compatibility test.

What is the thickest motor oil?

Importance of a Viscosity Scale

In order to have a standard way to measure the viscosity of engine oil, the Society of Automotive Engineers (SAE) developed a viscosity scale. The scale ranges from 0W, which is the thinnest type of oil, to a rating of 60, which is the thickest oil.

Is 10w30 better for high mileage?

10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines. Older engines with more than 75,000 miles on them require a thicker oil that will properly lubricate their critical engine parts and prevent oil leaks, sludge, and deposits.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well.

Is synthetic oil better for older cars?

Myth: Full synthetic oil is not good for high mileage cars or older vehicles. The myth is rooted in the idea that synthetic oil is “slipperier”—lower in viscosity, or not as compatible with seals and will therefore leak or leak more in places conventional oil might not. Again, completely untrue.

Can we use 15w40 instead of 5w30?

No, you won't blow a head gasket, but 15W40 is too heavy an oil to use where 5W30 is required. Besides, most 15W40 oils are gor diesel engines. No it won't blow off,you will just wear your engine out quicker because the oil won't flow to the moving parts as quickly !

What is the difference between 5w30 and 15w40 engine oil?

15w40 is usually used in diesel engines and has a much different additives profile. 5w30 is usually used in gasoline engines. Diesel oil is designed with high antiwear additives such a ZDDP.

Are all 15W-40 oil the same?

No. Oils carry a certification and must be selected to meet or exceed the recommendations in your engine manual. Oil standards are normally backwards compatible, but the base oils are different.