What size AC do I need for 2000 square feet?

If your home is 2000 square feet, you can calculate your HVAC needs the same as you would for a 1600 square foot home. Assuming one ton of cooling capacity can cool 400 square feet of your home, you'll need about 5.0 tons of air conditioning capacity. Multiply this by 12,000 BTUs, and you'll get 60,000 BTUs.
Takedown request   |   View complete answer on thecoolingco.com


How many seers do I need for 2000 square feet?

MrCool 3-ton DIY mini split with 20 SEER rating is an affordable unit for 2,000 sq ft homes in colder climates and with good insulation.
Takedown request   |   View complete answer on learnmetrics.com


How many square feet will a 3-ton AC cool?

How many square feet does a 3-ton air conditioner cover is quite easy to answer as well. 3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.
Takedown request   |   View complete answer on learnmetrics.com


How many BTU do I need for a 2000 sq ft house?

An average 2,000-square foot home will need between 80,000 and 115,000 BTUs to heat efficiently.
Takedown request   |   View complete answer on bobvila.com


What size AC unit do I need for 2100 square feet?

Choose a unit that is 3.5 tons if your home measures more than 1,800 but not more than 2,100 square feet. A four-ton unit is suitable for homes that are more than 2,100 square feet up to 2,400 SF.
Takedown request   |   View complete answer on isleys.com


What size AC do I need for a 2000 square foot home?



How much does an air conditioner cost for a 2000 sq ft home?

Installing a central air conditioner into a 2000 square ft. home with an existing forced air furnace heating system (that has all ductwork installed properly) would cost between $3,000 to $4,000.
Takedown request   |   View complete answer on modernize.com


How much is a 3.5 ton AC unit?

New AC unit cost recap

When it comes to a 3.5-ton AC unit cost, you will pay around $3,500 to $3,700. A 4-ton AC unit cost is $3,700 to $3,800 on average.
Takedown request   |   View complete answer on atlasacrepair.com


What size furnace do I need for a 2000 sq ft house?

Rough Estimates

A mid-sized home of 2,000 square feet would need approximately 50,000 to 60,000 Btu to heat it properly. With a less efficient furnace operating at 80 percent efficiency this would require a 60,000- to 72,000-Btu furnace.
Takedown request   |   View complete answer on homeguides.sfgate.com


How much does an air conditioner cost for a 2500 sq ft home?

Replacing a 3 to 5-ton AC unit costs $3,000 to $8,000 for a 1,500 to 2,500 square foot home.
Takedown request   |   View complete answer on homeguide.com


Can I replace a 3 ton AC with a 4 ton?

Proper size is a must. There is no reason for you to install a 4 ton if you can use a 3 ton. The low stage isn't that much less than full capacity because of the unloading scroll systems.
Takedown request   |   View complete answer on homex.com


What is price difference between 14 SEER and 16 SEER?

Differences Between 14-SEER vs 16-SEER

The first thing to know is that a 16 SEER unit uses about 13 percent less energy than a 14 SEER unit. In layman's terms, for every $100 you spend with a 14 SEER unit, you would only spend about $87 with a 16 SEER unit.
Takedown request   |   View complete answer on dayandnightair.com


How many square feet will a 2-ton AC cool?

For those of you that don't understand the way AC systems work, a 2-ton unit typically provides cooling for about 900-1,400 square feet of space – give or take.
Takedown request   |   View complete answer on canyonstateac.com


Can I just replace my outside AC unit?

Even if you could find an outdoor unit that uses the same refrigerant as your old indoor unit, we would still advise against replacing only the outdoor unit because it would likely create a mismatched system.
Takedown request   |   View complete answer on shaferservices.com


Why is HVAC installation so expensive?

Conclusion. When it comes down to it, the most expensive parts of any HVAC unit installation will be the machine and the labor. The device is so expensive because it is filled with complicated electrical gadgets that measure airflow and temperature.
Takedown request   |   View complete answer on hvac-boss.com


How many square feet does a 2.5 ton AC unit cool?

For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.
Takedown request   |   View complete answer on applianceanalysts.com


Is it better to undersize or oversize a furnace?

It's better to be a little undersized than oversized, You'll get a little longer run time, but it's better than shortcycling.
Takedown request   |   View complete answer on hvac-talk.com


How do I calculate air conditioner size?

Calculate Size

To calculate the size, simply multiply the length times the width of the room or area to be cooled. Then, as a practical number, multiply that total times 25 BTU. This allows ample cooling, whether it is a rainy, moist day or a hot, sunny, humid day.
Takedown request   |   View complete answer on thespruce.com


What is the average cost of a 3 ton HVAC system?

Residential HVAC unit cost per ton

An average 3-ton HVAC unit costs $1,700 to $5,000. Models with high SEER ratings cost the most upfront but are more energy-efficient and cost less to run.
Takedown request   |   View complete answer on homeguide.com


Is 18 SEER worth the money?

In general, 18-SEER air conditioning systems are more efficient and provide better overall comfort than 14-SEER units. When considering the price difference, you should also consider the long-term energy savings that 18-SEER units offer.
Takedown request   |   View complete answer on baylorinc.com