What sander is best for outside decks?

A random orbital sander
random orbital sander
A random orbital sander (also known as a palm sander) is a hand-held power tool which sands in a random-orbit action. That is, in constant irregular overlapping circles. This technology was first commercially utilized in 1968 by Rupes Tools.
https://en.wikipedia.org › wiki › Random_orbital_sander
is a specialized tool that sands wood in an elliptical pattern. It's the most efficient sander to use when refinishing a deck, as they're easy and practical to handle.
Takedown request   |   View complete answer on nainc.org


How do you sand an outdoor deck?

Sand the Deck
  1. Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards.
  2. You may need to use a sanding sponge on the railings or balustrades.
  3. Use 60- or 80- grit sandpaper on the main deck boards, and use 80- or 100-grit on the handrails.
Takedown request   |   View complete answer on homedepot.com


Should I use orbital sander or belt sander for deck?

Remember that woods used on decks are typically soft-wood species. Belt sanders, whether hand-held models or large uprights, tend to gouge softwoods, so an oscillating or random orbit sander is usually the better choice.
Takedown request   |   View complete answer on thespruce.com


Should I use palm or orbital sander for deck?

If it's an extremely smooth finish free of swirls or blemishes that would show through on your paint or stain, go with a random orbital sander. Just want to eliminate small imperfections on wood, especially on inside corners? Go with a palm sander.
Takedown request   |   View complete answer on familyhandyman.com


What kind of sander Do I need to sand my deck?

A random orbital sander is the best tool to sand a deck because it tends to be lighter and easier to use than other sanders. Random orbital sanders are also generally kind to the wood of a deck; belt sanders, by contrast, can gouge softwoods.
Takedown request   |   View complete answer on homesandgardens.com


Best Sanders For Deck ⚙: The Best Options Reviewed | Woodwork Advice



Can I pressure wash my deck instead of sanding?

That being said, sanding is a lot of work. You can get the same clean, fresh surface with a good pressure washing. A pressure washer removes the deteriorated finish and some of the decayed wood fiber leaving a like-new surface after the wood dries.
Takedown request   |   View complete answer on sfgate.com


Should I wash my deck before sanding?

When the deck is dry (36-48 hours after washing, depending upon humidity and weather conditions), it's time to sand the surface. You can use a pole sander with 80-grit sandpaper to remove all the loose wood fibers that were lifted by the pressure washing.
Takedown request   |   View complete answer on gnhlumber.com


How long does it take to sand a deck with a deck sander?

Let me explain: In general, it will take you 8 hours to sand a deck that is 25m2, using a belt sander. But there are a few factors that can affect the time it takes to sand your decking.
Takedown request   |   View complete answer on deckrestorationco.com.au


Can you sand a weathered deck?

Using coarse (60-grit or lower, if available) sandpaper and a sanding pole, sand the deck's surface. If you're refinishing the railings, use an electric sander or sanding block. Sweep or vacuum away any dust. Make sure you're wearing safety glasses and a mask so you don't inhale any dust.
Takedown request   |   View complete answer on bobvila.com


What is the difference between a drum sander and orbital sander for a deck?

Staalesen adds, “A drum sander cuts; an orbital grinds." “If your floor is in rough shape, cupped or damaged, or has a very heavy finish, a drum sander is what you need,” he adds. “An orbital won't relevel your floor.”
Takedown request   |   View complete answer on forconstructionpros.com


Should you hose down a deck after sanding?

After sanding, power-wash the deck and allow it to dry for at least 24 hours before staining. Sanding exposes porous wood that's ready to soak up the stain, but this isn't possible if the wood is full of water.
Takedown request   |   View complete answer on bobvila.com


Can you sand a deck with an orbital sander?

Using a random orbital sander is by far one of the most efficient and smoothest ways to sand your deck. These sanders are typically lighter, easier to operate and quieter than other types of sanders for your deck refinishing projects.
Takedown request   |   View complete answer on nainc.org


How much does it cost to sand a deck?

The average deck refinishing cost is between $3 and $6 per square foot. Of course, this is just an average. Other factors, such as the condition of your deck, the type of wood it is made of, and the type of stain or sealer you use, can also affect the price.
Takedown request   |   View complete answer on teakanddeck.com


Can I use 120 grit to sand my deck?

If you're removing existing stain or paint, start with a coarse grade of sandpaper like 40-grit, then go over the surface again with a finer grade like 120-grit to create a smoother finish.
Takedown request   |   View complete answer on bunnings.com.au


Do I need to sand deck before oiling?

Sanding & oiling your deck is necessary to prolong the life of your deck. In order to remove damaged and splintered wood from your existing deck, it is necessary to sand the deck before applying any oils or stains. The deck must be smooth, clean, and free of debris before applying a stain or oil.
Takedown request   |   View complete answer on deckingsydney.net.au


Can I use a palm sander on my deck?

Sanding Can Reduce Wood Deck Stain Penetration

A good rule of thumb is to start with a sander and finish off with coarse sandpaper, palm sander, or a coarse sanding sponge. Your sandpaper grit should be around 60 or 80 grit – anything more will crush the wood grain shut and make staining your deck floor more difficult.
Takedown request   |   View complete answer on deckstainpro.com


Will a sander remove paint from a deck?

Sanding and stripping are the two most popular methods of removing a finish from decking and returning it to bare wood. Both techniques can be used for removing paint, weatherproofing or varnish, and each method has distinct advantages and disadvantages.
Takedown request   |   View complete answer on homeguides.sfgate.com


What to do if it rains after sanding deck?

It shouldn't make too much of a difference that it rained after you sanded it down as long as it still has pores to absorb the stain. I always recommend placing a large tarp over the area so that if it does rain, you don't have to worry too much about your work.
Takedown request   |   View complete answer on diy.stackexchange.com


Does sanding ruin pressure treated wood?

Sanding pressure-treated wood is actually contraindicated because, as Sand & Stain warns, you'll end up partially removing the protective coating created by the pressure treatment, and the wood will look terrible.
Takedown request   |   View complete answer on homeguides.sfgate.com


Can I sand my deck with a floor sander?

Although many people will be tempted to use a floor sander, these have a number of shortcomings, including their size and weight (which could damage your deck), and the fact they can only sand perfectly flat surfaces. Most decks will have a slight curve in them, so a floor sander just won't do the job.
Takedown request   |   View complete answer on floorsanderslondon.co.uk


What is the easiest way to refinish a deck?

  1. Step 1: Thoroughly Clean the Deck. ...
  2. Step 2: Clean with the Right Solution. ...
  3. Step 3: Rinse the Deck Thoroughly. ...
  4. Step 4: Inspect the Deck for Problems. ...
  5. Step 5: Sand the Deck (If Necessary) ...
  6. Step 6: Apply a Wood Brightener. ...
  7. Step 7: Seal the Deck. ...
  8. Step 8: Repeat as Necessary.
Takedown request   |   View complete answer on teakanddeck.com
Previous question
Is SAT fully MCQ?