What is the coverage of Thompson's water Seal?

COVERAGE Thompson's Water Seal will cover approximately 4 m² per litre. Coverage will vary depending on the texture and porosity of the surface to being treated.

Is one coat of Thompson's water Seal enough?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water.

How many square feet does Thompson's timber oil cover?

The expanded line of Thompson's WaterSeal Penetrating Timber Oil will be available for purchase at The Home Depot for $35-$39 per gallon. A one-gallon can of stain will cover roughly 150 - 350 square feet and can be applied using common deck staining tools.

How many square feet does a gallon of deck sealer cover?

You can get this result by assuming that 1 gallon can cover up to 175 ft². Also, consider this amount is for one coat of stain. If you plan to apply more than one coat, multiply by the number of stain coats.

How much stain do I need for a 12x12 deck?

How Much Stain Do I Need For My Deck? For decks and patios that measure up to 175 square feet, you will only need one gallon of stain, in any transparency. If your deck or patio measures up to 550 square feet, you will need to buy 2 gallons of stain.

Thompson’s WaterSeal Review, Does It Work?!

Can I apply 2 coats of Thompson's Water Seal?

Apply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.

What is the best way to apply Thompson Water Seal?

The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.

How long does Thompson's Water Seal last?

Water Seal can only be used on bare and uncoated brick, stone or concrete. How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.

How much does a 5 gallon bucket of stain cover?

Divide the total square feet of fence to be stained by the coverage listed on the can. For example, if you have 1,000 square feet of fence and the stain says that 1 gallon covers 200 square feet, you would divide 1,000 by 200, which equals 5 gallons to cover the fence.

How do I calculate the square footage of my deck?

The first step for answering “how to calculate how much decking I need” is to determine your deck's square footage, or area, by taking the length of your deck times the width (L x W). EXAMPLE: For a deck that is 16 feet long and 12 feet wide, multiply 16 by 12. This gives you 192 square feet, your deck's total area.

How much does a pint of stain cover?

Product Details. Easy to use wood finish covers up to 70 sq. ft.

What's better than Thompson's water seal?

How often should Thompson Water Seal be applied?

Thompson's WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

Can I apply Thompson's water seal with a sprayer?

Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. There are no concerns about it eroding any of the seals inside of it.

What happens if it rains after applying Thompson's water seal?

What happens if it rains after applying Thompson's water seal? A light shower will not significantly affect a deck with Thompson's waterseal, but a heavy downpour will likely cause the product to dry cloudy on the surface. In any case, the sealant will still work despite the rain.

How long does it take Thompson Water Seal to dry?

Drying. Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.

Should I use Thompson Water Seal on pressure treated wood?

Some, like Thompson's^® WaterSeal^® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson's^® WaterSeal^® Waterproofing Stain, can be applied immediately to new pressure treated lumber.

Can Thompson Water Seal go over stain?

Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it's fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.

Is it better to stain or seal a deck?

Deck sealing will protect the wood from splitting, cracking, moisture, mildew, and rot while maintaining the color and grain of the wood. A stain will protect the wood and provides a more uniform tint or color to the wood to complement surrounding structures.

Should I power wash my deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Can you use a roller to apply stain to a deck?

Use the proper roller nap for best results, but remember that rollers are not really designed to hold deck stain. A wide 18-inch roller may work well for staining a few fence or deck boards, but a mop or stain pad will hold more stain, lessening the amount of time you have to dip back into the stain bucket.

How many sq ft is 12x12?

The square footage of a room 12 feet wide by 12 feet long is 144 square feet.