What is the best subfloor material?

Plywood. Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Is plywood or OSB better for subfloor?

OSB has a lower resale value than plywood due to its lower strength. For this reason, few homeowners prefer OSB in their homes. Apart from costs, plywood is superior in all the other areas, such as the strength of the structure. For this reason, it's a superior material for use on the subfloor.

What is the strongest subfloor?

Because plywood is the stronger material, very observant home buyers may place a small premium on plywood subfloors.

What thickness subfloor is recommended?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

What is the best plywood to use for a subfloor?

Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.

Plywood Vs. OSB - Subfloor Comparison

Is OSB a good subfloor?

Some builders prefer OSB over plywood for flooring because the surface, when new, is always clean, flat, and knot-free. Since OSB is so dense, it's a good soundproofing product. OSB is a more consistent product than plywood or other types of material for subfloor: every sheet is the same.

Do you nail or screw subfloor?

Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.

Which is better OSB or plywood?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists.

What type of wood should I use for subfloor?

Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Do I need tongue and groove subfloor?

For subflooring, you use tongue and groove plywood. The tongue and groove are only along the 8 foot edges. On the four foot edges, your seams will fall on joist tops, so no need for tongue and groove. But to start off, we will need to remove the tongue so the plywood is tight with the exterior ICF walls.

Can Hardie board be used as a subfloor?

Installing HardieBacker Cement Board to a wooden subfloor is as simple as that! HardieBacker Cement Board can be used with nearly any kind of tile, whether ceramic, porcelain, or natural stone. Here's how to add your tile over your HardieBacker Cement Board: 1.

Why is OSB so expensive?

OSB is expensive because it takes a long time to expand lumber mills and increase their supply output.

Should I use treated plywood for subfloor?

There's no need to worry about making treated wood safer that is completely covered in other materials and hidden from access, such as subflooring. Pressure treated wood doesn't release any gases or particulates that could harm you and your family.

Which is more water resistant OSB or plywood?

Plywood is porous and is susceptible to damage when exposed to water for longer time. OSB is not water resistant and hence cannot be used for exterior projects.

Do I need 2 layers of subfloor?

That's the usual approach. Almost no one puts down double-thick subfloor in residential applications (for cost and handling reasons), and both layers need to be fastened to joists. Only thin underlayment can be fastened just to the subfloor.

Is OSB cheaper than plywood?

OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.

What's the difference between OSB and plywood?

Plywood is made of many layers of very thin wood, called plys, pressed together with glue. It may be given a veneer ² top of hardwood, while the inner layers are typically made of softwood. OSB is made of many smaller pieces of hardwood and softwood mixed together in strands.

What size plywood do you use for subfloor?

Glue is sprayed between each layer and the sheet is hot pressed. CDX plywood should be a minimum of 7/16 inch thick. The thicknesses are as follows: 7/16-, 15/32- and 1/2-inch-thick panels require joists spaced 16 inches on center; 19/32- and 5/8-inch-thick panels require joists spaced 20 inches on center.

Which is better OSB or CDX plywood?

Although some people will ultimately choose CDX, many experts argue that OSB is better overall for roofing. OSB is far less likely to expand and contract when exposed to humidity and moisture, even though it will take longer to dry. With wrapping, though, it can withstand the elements without issue.

Is MDF stronger than OSB?

OSB is considered to be stronger than MDF. OSB is suitable for structural projects and withstands water, moisture, and weather conditions better than MDF. However, MDF is more versatile and easy to work with than OSB and preferred for projects requiring a smooth finish.

How do you keep OSB from rotting?

However, several coats of quality exterior grade primer and porch paint or stain will help waterproof standard oriented strand board panels. Covering the OSB with a weather-resistant material and siding, bricks or shingles will also protect OSB from precipitation.

Do you need to glue subfloor If using screws?

The answer: Glue. Although using a subfloor adhesive (or subfloor glue) is not required by code, it is a standard practice that can help prevent floor squeaks by reducing the chance for movement at the panel-to-joist connection. A quality subfloor adhesive will also increase the overall stiffness of the floor.

Does plywood need an expansion gap?

Unlike laminate floors which float over an existing floor and have expansion gaps, plywood is usually screwed or nailed into position and expansion gaps are not necessary. You should fit the plywood sheets tight together , but always leave a 10mm expansion gap at the perimeter.

Can I put new subfloor over old subfloor?

Install a layer of at least ½” or preferably 5/8” ply over the existing planks. This is particularly important if your old sub floor has lumps and bumps in it. If you don't respect this thickness of ply, then you're highly likely to see rises and falls in your new flooring.

Can you install vinyl plank on OSB?

Yes, provided it meets the specifications required for subfloor preparation. Bear in mind that plywood and OSB substrates tend to get 'roughed up' during construction, and any imperfections in the surface will eventually telegraph through to the surface of the floor.