What does C1 mean on a tire?

"C1" and "C2" are both 6 ply rated, but C1 has a max air pressure of 50 PSI and C2 has a max air pressure of 35 PSI. This holds true for other ply ratings too. Tires on a sedan, coupe, crossover or minivan are usually unmarked because they have a standard 4-ply rating and do not require higher load carrying abilities.

What does C rated tire mean?

The C-Type tire, on the other hand, is specifically meant as a commercial-rated tire, with a higher load rating for a given size than many LT tires. These C-Type tires will show the letter “C” immediately after the wheel diameter in the tire code. Example: 225/75R16C.

What is better Load Range C or E?

The load C tires have softer sidewalls and provide a more comfortable ride both on road and off road. The E rated tires have stiffer sidewalls and are more suited for towing or loading the pickup bed with heavy loads.

What is the C after tire size?

LT-Metric is a designation standardized by the Tire and Rim Association for a “light truck” type tire. Euro-Metric Commercial or C-Type tires will look very similar to a passenger Euro-Metric size except that there will be a “C” right after the rim size: 23/65R16C 121/119R.

What load range is better B or C?

A load range C tire will have a higher capacity than a load range B tire of the same size.

Citroen C1 tyre pressure monitor reset (new shape C1)

What load range is C?

Therefore, load range simply defines the tire's toughness and maximum allowable air pressure, as opposed to specific information about the actual plies being used. For example, a "C" load range indicates that a tire is equivalent to a 6-ply construction tire.

What does the C mean on road bike Tyres?

Road bicycle tyres generally come in three widths: 23c, 25c and 28c - this number refers to the width of the tyre at their widest point, in millimetres i.e. 23mm, 25mm and 28mm.

What does Load Range C mean on a trailer tire?

A load range 'C' tire, for example, is at its peak load capacity—possibly 1600 pounds—when it's inflated to its maximum pressure of 50 PSI. A load range 'C' tire at 25 PSI might be able to support a load of 990 pounds, while at 40 PSI, that capacity could be 1300 pounds.

What does the C mean in 235 65r16C?

The 235/65r16C is the size and the C on the end signifies they are Euro-Commercial tires which means the tires are appropriate for that vehicle based on the Euro standards.

What load rating do I need?

To roughly determine the load range capacity for each individual tire, take the vehicle's gross weight and divide by four. If the vehicle gross weight is 4,500 pounds, each tire should be able to safely support at least 1,125 pounds.

What load range is a 10 ply tire?

For example, an “E” load range indicates that a tire is equivalent to a 10-ply construction tire.

Are Load Range E tires 10 ply?

To summarize: ply ratings and load ratings are systems of measurement for load carrying capacity. Load Range E tires are equivalent to a 10-ply tire.

What does LT mean on tires?

If a tire size reads, LT235/75R15 104/101S, the LT indicates that this tire is meant for Light Truck use. These tires are made for light-duty and heavy-duty pickup trucks (typically ½ ton, ¾ ton, or 1-ton load capacity), SUVs and vans.

What load range are LT tires?

LT tires are designed for vehicles carrying a heavier load, and some off-road conditions. LT tires typically have a load range of 10-ply versus a four-ply load range on a passenger tire.

Are LT tires more puncture resistant?

If a high load rating or tire resistance to punctures is high on your list LT rated is the best option.

Are 4 ply tires better than 6 ply?

Most passenger vehicles these days come with either 4-ply or sometimes even 6-ply tires because they are a better fit for the purpose. If you primarily use your car in town without ever going off-road, a set of 4-ply tires is what you are after.

What load range is a 12 ply tire?

Tire Ply-Ratings

So typically we would say a tire is 6-ply rated, 8-ply rated, or 10-ply rated, and those correspond to Load Range C, D, and E respectively. So of course a Load Range F does correspond to a 12-ply rating.

What is the highest load range for a trailer tire?

Load Range Capacity and Ply Ratings

This article focuses on 14 ply trailer tires (load range G), which is the highest capacity you can get. 14-ply rated trailer tires can sustain pressures of up to 110 psi (760 kPa), and weight of over 4,000 lbs per tire.

What does C mean in 700c?

At one point in time, "700c" was a standard tire/rim size, where "c" indicated the bead seat diameter and "700" was the diameter, in millimeters, when the tire was installed and inflated. That "700c" tire size has a 622 millimeter bead seat diameter.

Is 622 same as 700c?

29″ / 700c (ISO 622 mm)

Here we have two more common wheel sizes that are in fact, exactly the same! The standard modern road bike wheel has an ISO diameter of 622 mm and is referred to as 700c (makes sense, right? /s).

What does the C stand for in inner tubes?

Option A: “C= Clincher Tires“

According to some, the letter “C”, indicates that the tire in question is a clincher type. “Clinchers” are the most common bicycle tires. They work with an inner tube and connect to the rim with a lip (bead).

What does XL mean on a tire?

XL (or Reinforced) tyres are 'extra load' tyres – they indicate that a tyre is reinforced to be able to withstand a higher load than other tyres of the same size.

Are all LT tires 10 Ply?

LT tires are usually 8-ply (Load Range D) or 10-ply (Load Range E). Passenger Tires usually have a 4-ply or 6-ply equivalent sidewall. The performance trade-off of this added weight is a harsher ride, less fuel efficiency, and less responsive handling.