What can you use on garage walls instead of drywall?

Instead of drywall, consider covering garage walls with cement board panels. These panels make it easy to add tile, or even stone veneer. Using stone veneer over cement board, you can create an exposed brick or natural stone wall in the garage.

What can I use instead of drywall in my garage?

Plywood, medium-density fiberboard (MDF) and oriented strand board (OSB) are expedient and low-cost solutions for garage walls. They can be attached over studs quickly with framing screws and, unlike drywall, wood doesn't require any taping, mud, or sanding.

What is the cheapest way to cover garage walls?

Shiplap is actually the perfect choice for garage walls. It's durable, inexpensive, and easy to install. What is this? Unlike drywall, the solid wood makes it perfect for securing anything, anywhere with hooks or nails.

What can I cover my garage walls with?

The best material for finishing garage walls is usually considered to be drywall. It increases the fire resistance of walls and is easy to install. However, you do have another garage wall covering option. Oriented strandboard (OSB) can be screwed to the wall framing, but does not require taping and finishing.

How can I insulate my garage without drywall?

You can also get loose-fill fiberglass, which is suitable for blowing into a garage attic space above a finished ceiling. If the walls and ceiling will remain open (not covered with drywall or plywood), it's a good idea to use paper-faced or encapsulated fiberglass bats that are wrapped in a plastic film.

Best Interior Wall Finishes for a Workshop or Garage

How can I insulate my garage cheaply?

Fiberglass roll insulation is the cheapest and easiest type to install, provided that your garage's interior walls have not been constructed. Unroll the insulation between the wall studs with the vapor barrier facing the inside of the garage.

How can I insulate my walls without drywall?

Injection foam insulation is the answer to insulating walls without removing drywall. There are several types of injection foam available out there, including the RetroFoam product we use. These materials don't require the drywall in your home to be taken down.

Can I use plywood instead of drywall in my garage?

Plywood Garage Walls is useful for the type of garage and storage spaces where homeowners frequently hang their tools, shelves, trophies, machinery etc. Due to the extra strength provided by plywood, there is high resistance to dents and damage, which is something that plagues drywall.

Is paneling cheaper than drywall?

Because of the greater attention needed for cutting and trimming wood, paneling may take more time and cost more than installing drywall. Also, paneling doesn't work as a sound barrier the way drywall does. Thus, in a workshop, installing wood paneling can produce a noisy, even irritating, atmosphere.

Is MDF good for garage walls?

MDF Slatwalls are Not Water Proof

They are not water proof nor moisture proof. If you have an old garage which may get exposure to moisture, MDF boards are not your friend. They may be painted and can be repainted but MDF will absorb the moisture over time. Its shape may change and it may also start to develop mould.

Can you put paneling in a garage?

Installing paneling in a garage is a straightforward project that almost anyone can complete without problems. The procedure you need to follow varies slightly between garages that cinder-block walls and wood-framed walls.

How do I spruce up my garage walls?

Should I finish my garage walls?

For those that spend a lot of time in the garage or have some of their most valuable belongings in there, putting up drywall in your garage is definitely worth while. It adds protection, appeal and longevity to your garage as a whole.

Whats cheaper than drywall?

If you're looking for cheap panels for walls, plywood is inexpensive, easy to install, and durable. The wood grain will warm up a space and can be stained or painted to coordinate with any decor. Plywood can be installed in sheets or planks, the latter resembling the look of shiplap or traditional wood paneling.

Is OSB good for garage walls?

OSB is a effective sheathing material for garage walls. It's strong and durable, and it can be used as a base for nailing or stapling insulation to garage walls. OSB can be left uncovered for utilitarian bare-wall constructions, but can be primed and painted.

Is shiplap cheaper than drywall?

Cost and Installation

Drywall panels are cheaper than shiplap per sq. ft., but once you factor in the cost of installation, shiplap usually comes out ahead as the more budget-friendly option. What is this? The average price for drywall is $15 per 4-by-8 foot panel or around $2.15 per sq.

Can I use paneling instead of drywall?

Plastic paneling is very easy to install, making it an easy drywall alternative to recommend. You can simply screw most plastic paneling into place and you will be able to cover up walls directly. You can put them right over the studs, so it's really convenient overall.

Can you use cement board instead of drywall?

While you can use cement board instead of drywall, it's not always practical. For starters, cement board is 2-3 times the cost of drywall. It's also harder to find cement boards in the larger 4 x 8' sheets. Cement board does have its place, though, and is very useful for high moisture rooms.

Can I put plywood on my garage walls?

Bottom Line. The bottom line is that both plywood and drywall can be used for garage wall sheathing. Drywall will meet the building codes. Plywood may not meet the building code, especialy for walls adjacent to the living space.

How thick should plywood be for garage walls?

The exact answer is 3/8-inch, and it's the minimum plywood thickness. The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing.

What kind of plywood do you use for garage walls?

An A Grade Plywood features a smooth, sanded surface without knots. However, for sheathing of garage walls a C Grade Plywood may be good enough. Especially if you are going to paint over it. For a natural wood grain look you may choose to stain or varnish plywood.

How do you insulate a finished garage?

You can insulate a finished garage, without removing the drywall by drilling small holes in the drywall and filling in the gap either using Injection Foam Insulation or Blown In Insulation. Each method has its pros & cons, but both are effective and will reduce your energy cost.

Should I insulate and drywall my garage?

Drywall is a great building matter that is highly resistant to fire so it is a great addition to garages. Garages often have power tools in them, flammable materials, and also people who work on cars with products that could catch fire. Installing drywall would be a good idea to keep it a safe area.

What is a Wahoo wall?

Wahoo Walls are made of non-organic materials that are unharmed by water and do not support the growth of mold. Made of JetBoard brand Magnesium Oxide adhered to an Integrity EPS by Atlas R-13 panel that is rated R-15/16 when used continuously without studs. These durable solid walls are fast and easy to install.