What can a jigsaw be used for?

Jigsaws are best used for cutting shapes and curves in wood with its narrow blade, which is attached to the tool's body by a spring-loaded clamp at the front. The blade's sharp teeth are measured in TPI, or teeth per inch. A higher TPI gives a smoother cut that requires less sanding.
Takedown request   |   View complete answer on homedepot.com


What can I make with my jigsaw?

18 DIY Jigsaw Projects You Can Build Today
  • A Bird Feeder by Sun Catcher Studio. ...
  • Mini Bowling Alley by Ashley Grenon. ...
  • Plant Hanger by The Inspiration Board. ...
  • Wooden Placemats by Handmade Haven.
  • Cook Shelves by A Crafty Mix. ...
  • Heart Candle Holder by The Navage Patch. ...
  • Drawer Organizer by The Sawdust Sisters.
Takedown request   |   View complete answer on housegrail.com


Can I use a jigsaw instead of a circular saw?

Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool's qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
Takedown request   |   View complete answer on bosch-professional.com


Is it worth buying a jigsaw?

Jigsaws can cut cut wood of varying thickness and density, and when fitted with the correct blade, they can also cut steel, fiberglass, and drywall. This adds to the tool's versatility and makes it more valuable in your workshop. Changing blades is easy.
Takedown request   |   View complete answer on popularmechanics.com


Can I cut a 2x4 with a jigsaw?

Want To Share This? A jigsaw is a precision tool with a thin blade, which makes them ideal at cutting intricate designs on thin material. If you ever had to cut a 2x4 piece of framing lumber with a jigsaw and thought to yourself... "there's no way", you might be surprised!
Takedown request   |   View complete answer on bettertoolz.com


What Can You Do With a Jigsaw? A Lot! | WOODWORKING BASICS



What thickness of wood can a jigsaw cut?

Jigsaws work best for cutting softwood that's no more than 1-1/2 in. thick and hardwood up to 3/4 in. thick. Jigsaw blades tend to bend when cutting curves in thicker boards, leaving a beveled edge rather than a square one.
Takedown request   |   View complete answer on familyhandyman.com


Can a jigsaw cut straight lines?

The jigsaw can be used to make both straight and curved cuts in a wide variety of materials, including wood, particleboard, plywood, plastic, metal, even ceramic tile. It's also safe and easy to use, which is why it's often the very first power saw a new DIYer buys.
Takedown request   |   View complete answer on popularmechanics.com


How much does a good jigsaw cost?

On average, a quality jigsaw will cost around $100.
Takedown request   |   View complete answer on thisoldhouse.com


What is the difference between a jig saw and a saber saw?

The terms jigsaw and sabre saw seem to be used interchangeably in the marketplace. And while different tool manufacturers have marketed their saws under both names, there's no recognized difference between a jigsaw and a sabre saw. They're the same tool.
Takedown request   |   View complete answer on thesprucecrafts.com


What is the difference between a skill saw and a jigsaw?

So, talking about differences – what exactly is the difference between a jigsaw and a circular saw? A jigsaw allows you to make cuts that are more intricate, and can also make curved cuts. A circular saw has one job, which is to cut quickly on heavy woods in straight lines.
Takedown request   |   View complete answer on thetoolsquare.com


What is better than a jigsaw?

However, when you need very intricate and precise cuts, a scroll saw is your best bet. It's built for making clean cuts in thin materials and creates lines that are so precise you may not even have to sand the edges. One example of a project that a scroll saw is perfect for is making a wooden jigsaw puzzle.
Takedown request   |   View complete answer on handymansworld.net


Can you Mitre with a jigsaw?

One feature that is cool about jigsaws is that they can cut at angles, too, just like circular saws and miter saws! Yep–they can cut straight angles (which is considered “0” degrees), along with 15-, 30-, and 45-degree angles.
Takedown request   |   View complete answer on thriftdiving.com


Which is better jigsaw or reciprocating saw?

The reciprocating saw is generally the go-anywhere, cut-anything tool for yard and job site use, whether building, remodeling or demolishing. Jigsaws are capable of rapid cutting but their main advantage is greater control and therefore better accuracy, particularly when cutting boards or sheet material.
Takedown request   |   View complete answer on bobvila.com


Can you cut a 4x4 with a jigsaw?

Most jigsaw blades can cut to a maximum depth of 1-1/2 inches, which is well below the depth needed for cutting through a 4×4. And, since a jigsaw blade is perpendicular to the saw's guard and cuts using an up and down motion, it cannot cut through material thicker than the blade like a circular saw or miter saw can.
Takedown request   |   View complete answer on weekendbuilds.com


What kind of jigsaw do I need?

Motor Power. Like most tools, higher amperage ratings indicate jigsaws that have more cutting power. The best jigsaws will have motor ratings of 6.5 or 7 amps; bargain saws might be rated for 5 amps or less.
Takedown request   |   View complete answer on thesprucecrafts.com


What type of saw do I need to cut plywood?

A circular saw, or skill saw, is a common tool used to cut plywood. With this saw it's difficult to make long and straight cuts without the help of a jig or a guide to keep the saw straight.
Takedown request   |   View complete answer on mrhandyman.com


What's the difference between jigsaw and Sawzall?

With their long, slim blades, jig saws are ideal for jobs that require delicate wood cuts. Reciprocating saws, however, with their horizontal blade action, are designed primarily for rough cutting and demolition jobs, such as cutting wood and metal aggressively.
Takedown request   |   View complete answer on homedepot.ca


What can you do with a reciprocating saw?

8 Handy Ways to Use a Reciprocating Saw
  • Demolition in Small or Awkward Spaces.
  • Cutting Through Wood and Nails.
  • Pruning Trees and Shrubs.
  • Cutting Various Plumbing Pipes.
  • Scrape Glue, Mastic, and Other Adhesives.
  • Remove Grout.
  • Sand and Scour Metal.
  • Cleanup After Storms.
Takedown request   |   View complete answer on bobvila.com


Can jigsaw cut metal?

A jigsaw is a hand-held power tool that is operated by a squeeze trigger in the handle and is designed to cut sheet metal, pipework and wood.
Takedown request   |   View complete answer on metals4u.co.uk


Which brand of jigsaw is best?

Thomas' Top Picks for the Best Jigsaws 2022
  1. Best Jigsaw for Home Use—BLACK+DECKER Corded Jigsaws. ...
  2. Best Small Jigsaw—Bosch Jigsaw Tool. ...
  3. Best Corded Jigsaw—Skil Jigsaw with Variable Speed Trigger. ...
  4. Best Budget Jigsaw—Skil Jigsaw Blade Tool. ...
  5. Best Value Jigsaw—PORTER-CABLE Jigsaw.
Takedown request   |   View complete answer on thomasnet.com


Why is it called jigsaw puzzle?

jigsaw puzzle, any set of varied, irregularly shaped pieces that, when properly assembled, form a picture or map. The puzzle is so named because the picture, originally attached to wood and later to paperboard, was cut into its pieces with a jigsaw, which cuts intricate lines and curves.
Takedown request   |   View complete answer on britannica.com


Can you cut drywall with a jigsaw?

The three main tools used to cut drywall are a utility knife, jigsaw, and oscillating multi-tool. The only way you could use a drill to cut sheetrock is if you use a roto-zip bit on it. However, you're better off to just use the roto-tool.
Takedown request   |   View complete answer on toolsowner.com


Why does my jigsaw not cut square?

Your jigsaw may not be cutting straight because it's outdated, lacking guide bearings necessary for straight cuts. Components such as blade clamps and guide bearings can also get damaged or worn. It's also possible that human error is to blame, and you need a better straight edge or technique.
Takedown request   |   View complete answer on toolsowner.com