Should you oil boos block before first use?

Provide a generous oiling right out of the package and before first use. Be sure to always coat all sides of the board when oiling. Use a clean cloth to apply the oil in the direction of the wood grain and allow the oil to soak in. Let it soak overnight & provide extra coatings if needed.

Should you oil a cutting board before using?

Cutting board oil is essential to keep your wooden cutting board from absorbing moisture and cracking or splintering. If you choose the wrong cutting board oil, it could go rancid on your board. You should clean and dry your board thoroughly before oiling, then oil it at a time when you can leave it to soak overnight.

How do you treat a new butcher block cutting board?

Apply oil with a soft cloth, in the direction of the grain, allowing the oil to soak in between each of the four or five coats required for the initial seasoning. After each treatment, wait about four to six hours and wipe off oil that did not soak into the wood. Re-oil the butcher block monthly, or as often as needed.

How do you moisturize a boo block?

For additional protection, it is recommended to use Boos Block® Board Cream to seal the top of the wood surface in conjunction to the Mystery Oil. Apply an even coat of the Board Cream using a cloth or disposable towel. Allow the Board Cream to penetrate the wood surface overnight, then wipe off any excess cream.

Is Boos Mystery Oil just mineral oil?

John Boos Mystery Oil is for care of tops & blocks that are used as a working, cutting surface. This fine oil is a mixture of white mineral oil & beeswax, & will give your John Boos product. The same quality finish as the factory. We recommend oiling your tops or blocks every 4-6 weeks.

How To Maintain Your Boos Block Wood Cutting Board

How do you treat butcher block for the first time?

Treat your butcher block to a facial to keep it fresh and glowy. After a few weeks of heavy use, wash and dry your block the way you typically would (see tip #1) and apply a generous layer of mineral oil* with a lint-free rag over the entire surface. Let it soak in for 2-3 hours.

How do you treat a brand new butcher block countertop?

Over time, butcher-block countertops can lose their luster and look dull and dry. Give them a refresh with food-safe mineral oil or butcher-block conditioner (available at home improvement stores). Don't use a food oil, like olive or vegetable oil, which will oxidize on the surface and start to smell.

How do you oil a cutting board for the first time?

For best use, apply a generous amount of mineral oil to your cutting board with a damp cloth. In 2-4 hours, the wood will absorb the oil. Wipe off what is not absorbed with cloth or paper towels. Repeat monthly, or as often as needed when your board becomes dry.

When should I oil my cutting board?

We recommended you oil your cutting board every month or when dry to the touch. Board cream should be applied at the same time as oiling.

Should I put oil on my wooden cutting board?

Avoid using cooking oils such as olive oil, coconut oil, or other vegetable oils because this type of oil will develop a rancid odor. Only oil wood boards. Plastic cutting boards do not need to be oiled. Simply wash these boards in hot water and dish soap and let them dry thoroughly.

How many coats of oil do you put on a cutting board?

On new or raw wood surfaces, like cutting boards and butcher blocks, make sure to "season" them first with Cutting Board Oil. To properly "season" new wood surfaces, apply at least 2 coats and let each coat soak in for at least an hour. For surfaces thicker than 1.5-inches apply 3-4 coats.

Why is my boos block splitting?

Warping or cracking due to storing of cutting board in excessively damp or humid environment. Damage or wear to swivel mechanisms. Products that are ordered "unfinished" (by default, all cutting boards come finished from factory)

Are Boos cutting boards worth it?

Boos Blocks are sturdy and built to last; with proper care, they can withstand years of vigorous slicing, dicing, and all manner of prepping. These boards are the sort of thing you can pass down to your children. The only downside is that they tend to fetch a lofty price tag.

How do you condition a butcher block?

On new or raw wood surfaces, like cutting boards and butcher blocks, make sure to oil them with Cutting Board Oil. To properly oil new wood surfaces, apply at least 2 coats and let each coat soak in for at least an hour. For thick surfaces apply 3-4 coats.

Do you have to treat butcher block countertops?

1. You'll have to take care of them. While pretty, butcher block countertops require much more maintenance than their marble or stone counterparts. You'll have to treat the surface with mineral oil to protect the natural wood and use sandpaper to sand down and fill in any nicks or scratches that have occurred.

Do you need to seal butcher block countertops?

If you used mineral oil to stain your butcher block, then you won't need to seal the wood. The oil forms a barrier to keep stains from soaking in the wood. Never apply a sealer over a countertop finished with mineral oil. If you chose an oil-based stain, you can finish your countertops with polyurethane.

What happens if you dont seal butcher block?

Wood is dried just before being shrink-wrapped. The second the wood is unsealed, dust and moisture can start to absorb into the wood. Both cause issues with a clean finish and water can cause damage in some situations. @AlaskaMan Thanks for the clarification.

How do you treat a butcher block naturally?

Sealing Butcher Block Countertops with Mineral Oil

To seal butcher block with mineral oil, you simply apply the mineral oil generously, let it soak in, and wipe off the excess. You need to do it fairly regularly at first but then only about once a month after you've gotten through several applications.

Can you use Clorox wipes on butcher block countertops?

Disinfecting. To disinfect your Traditions butcher block after cleaning use Lysol® or Clorox® Disinfecting Wipes. These wipes are available at Lowe's, and report to kill 99.9% of viruses and bacteria when used as directed.

How do you use Boos Mystery Oil?

Use a clean cloth or disposable towel to evenly spread the Boos Block Mystery Oil across the entire cutting board surface, making sure to oil the bottom, top, and sides of the board.

Does Boos Mystery Oil expire?

The cooking oils in your pantry become rancid when they are exposed to oxygen, so they are not a good choice for spreading over your cutting board. Mineral oils, on the other hand, are resistant to oxidation. This means that when they come in contact with oxygen or water, they will not spoil.