Is vinyl fascia any good?

Vinyl is widely used for siding and fencing because it is durable and low-maintenance. The same is true when using it for fascia and soffit as well. It is fade-resistant and not susceptible to insect damage or rot. There is no need to paint vinyl; maintenance usually involves spraying it clean with a hose.

How long does vinyl fascia last?

Vinyl Peeling and Finish Degrading

Aluminum painted surfaces usually last around 10-15 years from looking superior. After about 10 years the aluminum will begin to oxidize. When this happens the fascia capping doesn't look as appealing.

Is vinyl fascia better than aluminum?

It is very easy to clean and maintain. You can buy it painted and vented for optimum air flow. Aside from cost, the main disadvantage of aluminum is its ability to dent under force. Also, it is not a good insulator like vinyl.

What's the best material to use for a fascia?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

Can fascia be vinyl?

Ply Gem Vinyl Fascia is a maintenance-free way to cover and protect your home's wood fascia boards. It completely covers fascia boards from the drip edge to the soffit. It looks better than painted wood from the first day of installation, and year after year.

PVC TRIM VS. WOOD TRIM? (Pros And Cons!)

Is PVC fascia good?

The applications are similar to wood, except it won't rot, crack, cup, split or warp like wood and its resistive to termites and wood boring insects. PVC trim is naturally white throughout, which makes it an excellent choice for trim on the outside of your home.

Is wood or vinyl soffit better?

The appeal of vinyl soffit panels is that it comes in various textures, mimicking different types of wood grains. Vinyl as a soffit material possesses high durability, not fading or degrading easily over time.

What material is best for soffit and fascia?

The Materials You Choose Matter, Too

Most roofing and siding professionals recommend that you go with either aluminum or vinyl for your fascia and soffit, as both are more water-resistant, and neither are as prone to rot.

Does vinyl soffit look cheap?

Potentially less attractive: Some people find vinyl to look cheaper than other soffit materials.

Can you bend vinyl fascia?

Outside corners: bend a 1˝ flange at a 90-degree angle so it turns the corner. Then cut the overlapping fascia and position as shown (Fig. 2). Inside corners: Use same technique as outside corners (Fig.

Can you use vinyl soffit with aluminum fascia?

Use 1 ½” roofing nails to install soffit. Use white panel nails to install aluminum fascia. Use tin snips to cut F-channel, vinyl soffit, and aluminum fascia. against the house to hold one side of soffit.

Should you cap fascia?

Capping over is a cheaper roofline repair option as the methods used are less substantial. It should only be considered if the existing timber fascia is in very good condition and free from rot. Attaching a PVC fascia board to rotten timber may cost you more in the long run!

Does fascia need cover?

The short answer to this question is, “Yes!” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more.

Is aluminum fascia better than wood?

Aluminum offers better damage protection compared to wood, as well. It won't rot and is resistant to bugs. Plus, it's better at resisting moisture, which protects your rafters and attic from rot and other damage.

Does vinyl siding devalue a home?

Vinyl siding helps increase a home's value by adding a fresh appearance, durability, low maintenance and energy efficiency. According to the 2019 Home Remodeling Impact Report, a vinyl siding upgrade will increase a home's value by 63 percent of the project's cost.

Can I replace wood soffit with vinyl?

While there are short-term costs to replacing wood soffits with vinyl, in the long-term, you'll see reduced upkeep and repair expenses. While painted wood peels over time, the color on vinyl soffit is embedded in the material, so you will not need to repaint the soffit.

Should I use vented or solid soffit?

Non-vented or continuous soffit works best when your roof has narrow eaves or if you need to ventilate a large amount of attic space. Vented soffit panels are good with a wider eave and a smaller amount of attic space because they have smaller vents between solid panels.

How long will PVC trim last?

1. Fully Cellular PVC. Lifespan: 30-50yrs depending on the manufacturer.

Is PVC exterior trim better than wood?

Plastic is definitely cheaper than wood. While plastic molding won't rot or mildew, it is very brittle and not very forgiving. You'll waste more in installation due to breakage. You have to pre-drill every nail hole because even thin finishing nails driven directly into it will cause it to break.

Can you put UPVC fascia over wood?

Hi yes you can buy upvc capping fascias and soffits. However you must make sure that the original woodwork is of sound condition. As you shouldn't cap over any rotten wood. All rotten wood should be cut out to the nearest roof truss end where the wood is good.

Can you put vinyl soffit over wood soffit?

While it is certainly feasible to install vinyl fascia and soffit over wood, you need to ensure that you are keeping in line with the local building codes. Make sure that your attic has enough ventilation before affixing your vinyl soffit over the plywood.

What is the proper overlap for adjoining pieces of fascia?

When overlapping aluminum/vinyl fascia covers, make sure to overlap 3/4” (19mm). Drive these nails through the fascia and only into the “V” groove of the soffit. You may also need to face-nail the fascia. Always pre-drill holes into fascia and do not nail tight.