Is tongue-and-groove plywood good for subfloor?

Tongue-and-groove plywood is superior to regular plywood for floor decks because it creates a stronger, more rigid subfloor, and helps eliminate sagging and "bounce" at the seams between the joists.

What type of plywood is best for subfloor?

Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.

What thickness of plywood should you use for a subfloor?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

What is best to use for subflooring?

Plywood. Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Should subfloor be tongue and groove?

Tongue-and-groove plywood is superior to regular plywood for floor decks because it creates a stronger, more rigid subfloor, and helps eliminate sagging and "bounce" at the seams between the joists. But it is also more difficult to install because the tight-fitting joints don't always go together easily.

Installing the Tongue-and-Groove Plywood Subfloor System

Should you glue tongue and groove subfloor?

Many manufacturers recommend applying a continuous ¼-inch-diameter glue bead to framing members and using a serpentine pattern for supports that are 3½ inches or wider. Apply two beads of glue to panel joint locations; a 1/8-inch glue bead applied at the tongue-and-groove joints can further improve floor performance.

What thickness should subfloor be?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

Is it better to use OSB or plywood for subfloor?

OSB has a lower resale value than plywood due to its lower strength. For this reason, few homeowners prefer OSB in their homes. Apart from costs, plywood is superior in all the other areas, such as the strength of the structure. For this reason, it's a superior material for use on the subfloor.

What is the standard thickness of a subfloor?

The thicknesses are as follows: 7/16-, 15/32- and 1/2-inch-thick panels require joists spaced 16 inches on center; 19/32- and 5/8-inch-thick panels require joists spaced 20 inches on center. For retrofitting older construction, 23/32- and 3/4-inch-thick panels can be used over 24-inch on center joists.

Do you need two layers of subfloor?

The subfloor has to be attached to the joists, and two subfloor layers glued together or just nailed through to the joists, is no different than one thicker subfloor layer.

What is the best subfloor for hardwood floors?

Hardwood flooring: Plywood is the best subfloor for hardwood flooring installation. CDX plywood ranging from 1/2 to 3/4-inch-thick and rated A/C will serve well for any hardwood flooring installation. Tongue-and-groove plywood is available to reduce squeaks and help the subfloor fit together better.

What type of plywood is used for underlayment?

Lauan Plywood, when used as an underlayment, should be Type 1 (Exterior). The best grade is BB and the next best is CC, while OVL (overlay grade) is the minimum acceptable face grade.

Do you nail or screw subfloor?

Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.

How many layers of plywood do you need for a subfloor?

If you are using plywood for your subfloor, you should use a minimum of one layer that is between ¾” and ⅝” thick. This thickness will suffice for most floors; however, codes will vary and a second layer is a good idea if your floor covering is going to be a heavy material like ceramic tiles or natural stone.

Should I use treated plywood for subfloor?

There's no need to worry about making treated wood safer that is completely covered in other materials and hidden from access, such as subflooring. Pressure treated wood doesn't release any gases or particulates that could harm you and your family.

How do I protect my subfloor from moisture?

Which is more water resistant OSB or plywood?

Plywood is porous and is susceptible to damage when exposed to water for longer time. OSB is not water resistant and hence cannot be used for exterior projects.

What is best subfloor for bathroom?

Plywood as a Subfloor Material

Traditionally, exterior grade plywood has been the subfloor material of choice for many bathroom flooring projects. Plywood is made by gluing alternating layers of wood veneer. CDX plywood (¾”) in particular is used often because it has a high level of resistance to moisture and humidity.

Is OSB good for subfloor?

Some builders prefer OSB over plywood for flooring because the surface, when new, is always clean, flat, and knot-free. Since OSB is so dense, it's a good soundproofing product. OSB is a more consistent product than plywood or other types of material for subfloor: every sheet is the same.

What size screws 3/4 plywood subfloor?

The proper steel screw sizes for securing 3/4-inch plywood to the floor joists are #8, #10 and #12 screws. The number refers to the thickness of the screw. Each is available in lengths from 1 1/4 to 3 inches. Typically, the 3-inch variety is used to secure plywood subfloors.

Can you put subfloor over old subfloor?

One of the benefits of removing the old flooring is it allows you the chance to fix any loose subflooring or squeaks by re-securing the main subfloor to the floor joists prior to installing the new flooring. With all that being said though the answer is YES you can install New Wood Flooring over the old.

Which way do you lay plywood subfloor?

Install plywood underlayment smooth side up. To avoid damage to the surface, install underlayment immediately before laying the finish flooring.