Is Thompson's water Seal better than stain?

The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays. Sealers should last at least a year, with some lasting up to three years.
Takedown request   |   View complete answer on gvpennysaver.com


Is it better to water seal or stain a deck?

Unlike stains, sealants lack pigmentation and generally provide less UV protection than stains. Stains always include pigmentation, which adds color to the deck and helps protect against UV damage. Even the best deck stains generally offer only moderate moisture protection.
Takedown request   |   View complete answer on bobvila.com


What's better than Thompson's water seal?

According to them, these are the nine most effective wood sealers:
  • Thompson's Water Seal. ...
  • Rainguard Premium Wood Sealer. ...
  • DEFY Crystal Clear Sealer. ...
  • Anchorseal 2. ...
  • Roxil Wood Protection Cream. ...
  • Eco-Advance Exterior Wood Waterproofer. ...
  • Ready Seal Stain and Sealer for Wood. ...
  • Pure Tung Oil Natural Wood Sealer.
Takedown request   |   View complete answer on usvintagewood.com


Should you stain or seal wood?

Yes, sealing wood after staining it is essential to protect it from damage and discoloration from foods, liquids, human touch, and piercing objects. While wood stain may seal the pores and offer some protection from moisture and water damage, its primary purpose is to color natural wood.
Takedown request   |   View complete answer on woodworkingclarity.com


What is the difference between sealer and stain?

So although a deck would benefit from a deck sealer by repelling moisture, it will still turn gray and become sun-damaged. A deck stain has the same water-resistant qualities that a deck sealer does. A deck stain, however, has added pigment or tone, which gives the stain some color.
Takedown request   |   View complete answer on deckstainhelp.com


Thompsons Water Seal Review See The Difference



Can you put Thompson water seal over stained wood?

Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it's fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.
Takedown request   |   View complete answer on woodworkingclarity.com


Can you stain over Thompson's water seal?

There is NO NEED TO REMOVE THE THOMPSON'S TO STAIN OR PAINT THE DECK OR RAILINGS. Follow the directions, You must wait at least 30-45 days (I recommend 6-12 months) before applying another product.
Takedown request   |   View complete answer on houzz.com


Can you put wood sealer over stain?

Most stains should be sealed to prevent bleeding. After smoothing the stained wood, apply a sealer coat of thinned shellac, sanding sealer, or other appropriate sealer. Do not use shellac with NGR or water-base stains. If you plan to finish the piece with polyurethane, make sure the sealer is compatible.
Takedown request   |   View complete answer on home.howstuffworks.com


Is stain enough to protect wood?

While staining creates a rich, deep color that highlights natural wood grain, it does not provide long-term protection. Without a protective top coat, wood can be damaged easily due to contact with water, food, or sharp objects. A polyurethane top coat protects the wood from scratches, stains and water damage.
Takedown request   |   View complete answer on rustoleum.com


How long does Thompson's Water Seal last?

Water Seal can only be used on bare and uncoated brick, stone or concrete. How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.
Takedown request   |   View complete answer on thompsonsweatherproofing.co.uk


What is best to protect wood outside?

Varnish, a combination of resin, solvent, and drying oil, gives a hard-shell finish that resists scratches without yellowing. To waterproof wood that will be placed outdoors, choose marine varnish, which contains UV absorbers to resist sun damage.
Takedown request   |   View complete answer on bobvila.com


Why does stain peel off my deck?

Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. With deck stains, specifically with semi-transparent finishes, more is not better. You only want to apply as much product as the wood can easily absorb.
Takedown request   |   View complete answer on defywoodstain.com


What is the best way to protect a wood deck?

The best preventative measure you can take to protect your wooden deck is to use wood sealant. Clear wood sealants are a great way to maintain the natural beauty and wood grain while still preventing damage from rot, mold, and other weathering.
Takedown request   |   View complete answer on seal-once.com


What is the best wood sealer for decks?

  • BEST OVERALL: Seal-Once Marine Premium Wood Sealer.
  • BEST BANG FOR THE BUCK: Rust-Oleum Varathane Ultimate Spar Urethane Oil Based.
  • PRESSURE-TREATED WOOD PICK: Thompson's WaterSeal Transparent Wood Sealer.
  • BEST FOR WATERPROOFING: Thompson's WaterSeal Clear Wood Sealer.
  • BEST WITH UV PROTECTION: Defy Composite Deck Sealer.
Takedown request   |   View complete answer on bobvila.com


Will staining wood make it waterproof?

There are two basic product categories for waterproofing: stains and sealants. Stains are used on wood to enhance color and make them weather resistant. Sealants protect concrete and wood from moisture but do not stop water movement through the concrete from the outside. For masonry, the sealants are the go-to product.
Takedown request   |   View complete answer on homedepot.com


Should you seal wood after staining?

After staining wood, you have to seal if because the wood remains a porous surface. If you're just using a regular stain, it can provide some degree of protection compared to totally unfinished wood. But it isn't good enough.
Takedown request   |   View complete answer on bybrittanygoldwyn.com


Do I need to seal my deck after staining?

Most of the time, stains also contain a protective sealant. It's a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface. Water-based stains can be cleaned up with water.
Takedown request   |   View complete answer on wooditsreal.com


What do you put on stained wood to protect?

Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats. If using a spray can, hold 8 to 12 inches from the surface and apply two or three light coats.
Takedown request   |   View complete answer on homedepot.com


Will stain rub off if not sealed?

Once dry, the stain won't rub off on the bedding. However, a sealer of some sort (polyurethane, shellac, etc.) will make the surface much easier to clean, resist staining, & wear better, etc.
Takedown request   |   View complete answer on diy.stackexchange.com


How long after staining can you seal?

Considering that most commonly used stains take between 12 to 24 hours to dry and cure completely, it's good practice to wait a full 24 hours before applying polyurethane sealer to your workpiece after your stain has been applied.
Takedown request   |   View complete answer on resin-expert.com


Can you stain a deck after using Thompson's water seal?

Thompson's® WaterSeal® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.
Takedown request   |   View complete answer on thompsonswaterseal.com


What is the best way to apply Thompson's water seal?

The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.
Takedown request   |   View complete answer on thompsonswaterseal.com


Is Thompson Water Seal good for pressure treated wood?

Some, like Thompson's® WaterSeal® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson's® WaterSeal® Waterproofing Stain, can be applied immediately to new pressure treated lumber.
Takedown request   |   View complete answer on thompsonswaterseal.com
Next question
Is cottonelle septic safe?