How much horsepower did the DZ 302 have?

After it's time on the pump, the DZ 302 posted 357 horsepower at 6,700 rpm and 333 lb-ft of torque at 4,300 rpm.

How much horsepower can a Chevy 302 make?

While Ford's little four-barrel-equipped 302 cubic-inch engine carries a compression ratio of 9.0:1, and a horsepower number of 220, the Chevrolet counterpart delivered an advertised horsepower rating of 290, and a compression ratio of 11.0:1.

What is a DZ 302 motor?

The 302 cubic-inch engine was developed as the powerplant for the first-generation Z/28 Camaro (model years 1967 through 1969). It utilized the block from a 327 cubic-inch engine, and a crankshaft from a 283 cubic-inch engine, resulting in a 302.4 cubic-inch displacement.

How much horsepower did the 69 Z28 have?

The Camaro RS Z28's 302-cid V-8 engine set it apart from the rest of the lineup. While the engine's advertised output was 290 horsepower, it actually produced upwards of 400 horsepower in the real world. Many drivers were in awe of the car's deceptive performance.

How much HP did a 69 Camaro have?

The four official 1969 Camaro 396 big-block options were the L34 (325 hp), L35 (350 hp), L78 (375 hp, iron heads), and L89 (375 hp with aluminum heads).

WHO'S DA BOSS? 1969 BOSS 302 FORD VS 1969 DZ302 CHEVY (MUSTANG vs CAMARO)

How much horsepower does a Z28 have?

The 350 cubic inch engine could barely boast 185 horsepower, even less if you lived in California and were subject to their strict emission laws. Even though it wasn't the familiar muscle car, buyers could still get some respectable performance options that made the revived Z28 a fun car to drive.

Did the 1968 Camaro come with a 327 engine?

8 Answers. No. 1968 Camaro Engine options were a 230-cid 6 (3.8L), a 302-cid 8 (5.0L) and in the SS/Z28 a 396-cid 8. 7 people found this helpful.

What year did Chevrolet make a 302?

What Year Did Chevy Make A 302? The Chevrolet 302 engine was produced in 1967, 1968, and 1969. Due to the presence of a Chevy/Borg Camaro, it was specifically made for the 605-cubic-inch engine that was required by the SCCA Trans Am division to be exempt.

How much horsepower does a 1968 Camaro have?

1968 Chevrolet Camaro SS-350 Sport Coupe (220 kW / 299 PS / 295 hp) (since September 1967 for North America U.S.) specs review.

Did the 69 Camaro come with a 327?

The 327 (LF7) was the base V8 engine early in the 1969 model year but was replaced by the 307-cubic inch (L14) in January of 1969.

How high can a 302 rev?

The bottom end of the 302 is the limiting factor for max revs. Standard cast crank and 2 bolt main bearing caps limit revs to about 6500. Steel crank and 4 bolt block allows a higher rev limit. Piston size and heads have no bearing on rev limit.

Was the Chevy 302 a 4 bolt main?

A common misconception is that 1967 and 1968 302's were 4 bolt blocks, while actually the only engine to use 4 bolt main caps was the 1969 version. The crankshafts used were forged steel, tufftrided pieces in all three years. 1967 models used a small journal crank with 2.000" rod journals and 2.299" main journals.

Is there a 302 big block?

With an unfinished bore size of 4.120-inches, the Boss 302 Big Bore block is capable of supporting engine sizes up to 363 cubic-inches while the Ford Racing Boss 351 Big Bore blocks are able to support up to 460 cubic-inches.

How much HP does a 302 V8 have?

Stock from Ford you can expect the 302 V8 to make 130 to 205 horsepower depending on the year and model. With the high output version, you could get up to 290 horsepower. Since the Ford 302 V8 was around for such a long time there is a large aftermarket community for them.

How much horsepower did a 1970 Boss 302 have?

The two cars are surprisingly equal in almost every respect. The Boss 302 concept is packaged around the standard fastback body. Manufacturer's curb weight is 3,122 pounds, and our test car weighed 3,485 pounds wet. The 302 V-8 is rated at 290 horsepower, which only hints at what really is buried in there.

Who had the 302 engine first?

Chevy had the first 302 in 1967.

How fast was a 1968 Z28 Camaro?

The 1968 Chevy Camaro Z/28 also had a top speed of 135 mph.

What is the rarest Z28?

Numerous variants of the Camaro have been built during its 50-year production run. None have been as rare as the Convertible Z/28.

Whats faster RS or SS?

Which One is Faster RS or SS Camaro? The Camaro SS is the faster of the two. It packs a bigger 6.2 V8 engine that is capable of producing up to 450 horsepower while the RS is capable of producing 335 horsepower with its 3.6L V6 engine.

What cars did the 302 engine come in?

The 302 was used in many Ford passenger vehicles, including the Ford Fairlaine, Torino, Ranchero, Fairmont, and Crown Victoria. On the Mercury side of the spectrum, the 302 was found in the Grand Marquis, Montego, Zephyr, and Capri, among others.

Did GM ever make a 302 engine?

In 1967, 1968 and 1969, Chevrolet built a 302 engine. Only 30 Chevrolet Camaro Z/28 convertible engines could be found, with engines rated at only 305 cubic inches when meeting the SCCA Trans Am rule. As far as I can tell, this was one of the most beautiful small block engines Chevrolet has ever produced.

What Camaro was bumblebee?

Bumblebee depicted as a 1977 Camaro and three different iterations of a fifth-generation Camaro and below as a modified 2011 Camaro SS.

Did 69 Camaro come with a 396?

PRODUCTION A total of 230,799 1969 Camaros were built, with the bulk of assembly done at Norwood, Ohio, and Los Angeles, California, also producing a large number. Records show 32,932 SS cars built, of which 12,904 were equipped with the 396 engine: 6,752 L35s, 2,018 L34s, 3,823 L78s, and 311 with L89 aluminum heads.

What does the Z stand for in Z28?

All of them are RPO codes, and really have zero meaning. Most of the time, they are for an RPO code for the suspension. Z28 was the RPO code for the Trans-Am spec Camaro. Z71 gets you an offroading suspension. Z06 was a special suspension for race-type Corvette from the 60's.