How many times do you turn hay?

In good weather the grass is tedded twice daily and in very good sunny, breezy weather haymaking should be achieved in 3 to 4 days. The old farmers rule of feeding the hay is still practiced, if it's cold to feel it's not fit to bale, warm to feel then it's fit to bale.

How often do you cut a hay field?

The first cutting in the spring should be when grass has greened up and reached 12 – 16 inches tall. This should clean up all the old growth of winter weeds and such. Then each subsequent cutting is at 3.5 to 5 week intervals.

How long do you leave hay before baling?

As a rule of thumb, wait to rake hay until after the dew has dried and the sun nears its peak, or around 11:00 am. If possible, let the raked hay sit for an hour or two before baling to allow more drying time. Haymakers have several types of rakes available.

How long after cutting hay do you rake it?

Cut first thing in the morning, ted about 2-4 hours later, do nothing the next day, rake as soon as dew is off (-48 hours after cutting), let dry about 3 hours, and bale. Sometime takes an extra day to dry or occasionally a day less if perfect weather. Subject: RE: How long does your hay lay to bale dry?

When should you not cut hay?

In hay fields, 24 degrees F is often considered a killing frost. In pastures with plant growth of a shorter stature relative to a hay crop (closer proximity to radiant heat from the soil) may require a colder temperature. But even 26 degrees F will cause some frost damage.

When is the best time to cut hay?

Why do they cut hay at night?

Though starches and simple sugars accumulate during the day, a substantial amount of these carbohydrates are used up during the night for growth and maintenance (via the processes of respiration). Therefore, cutting the crop at night will likely maximize the sugar in the crop, at least at the time of cutting.

Is 3rd cutting hay OK for horses?

Hay of the third cutting is thick, green, and very nutritious, containing more legumes and high protein and fat content. It is also leafy and soft, so the horses will find it appealing.

How often should you tedder hay?

Initial tedding should be performed after a brief wilting period following a morning cutting while the hay is still moist (two to four hours). In very damp conditions, tedding may need to be done immediately after cutting. A second pass is usually done the next day, and the hay is raked and baled that afternoon.

Does raking hay help it dry?

Raking tends to roll the wetter hay from the bottom of the swath to the outer surface of the windrow, which improves drying. Following the initial improvement, the increase in swath density can reduce drying rate, so the crop moisture content at raking is important.

Can you feed hay straight off the field?

In perfect conditions — where the hay has been baled at less than 12% moisture and is very dry — it is safe to feed straight away, but this isn't often the case, Tim explains: “The main reason for allowing a period of anywhere between two and eight weeks before feeding freshly made hay is to allow for a process called ...

Can hay be too dry to bale?

When hay is too dry before baling, the leaves of the forage become stiff and brittle, making them much more likely to fall off. In many cases, a significant portion of hay's nutritive value lies in the leafy portions of the herbs used to make the hay.

Can you cut and bale hay the same day?

In a trial at the University of Wisconsin Arlington Research Station (Figure 2) where alfalfa was put into a wide swath it reached 65 percent moisture in about eight hours and could be harvested for haylage the same day as cutting.

Do you plant hay every year?

Planting and growing

Some fields are always used to grow hay, and don't require re-planting every year. In other cases, hay is a part of a crop rotation, where farmers plant different crops on the same field in different years.

At what height should hay be cut?

According to Gelley, the general rule when mowing lawns is to remove one third of the total leaf area. For hay production of cool-season pastures, mow or graze before seedheads develop, and down to 3 to 5 inches. For warm season pastures, mow or graze down to 8 to 10 inches for proper regrowth.

What month should you cut hay?

Optimum conditions for first cuttings can generally be expected around May 15th in the south and May 25th in the north. Though different cuttings provide different levels of nutrition (a topic for a future blog), the most important determination of hay quality is its state of maturity when cut.

Do you have to tedder hay?

Therefore, in moist climates, a tedder, which spreads the hay for increased sun and air exposure, is most likely a necessity. There are situations, however, when a tedder should not be used. Tedders are intended to be used on crops while they are still higher in moisture and pliable.

Does rain hurt fresh cut hay?

Research at Iowa State University found that fresh-cut hay with less than 1 inch of rain took a few more hours to dry, but didn't suffer much, if any, quality or quantity loss. A light rain on nearly dry hay, though, caused significant losses.

Can you bale hay at night?

Baling at night is nice if your climate will allow. Then the leaves start to toughen up before the stems and the outside before the bottom. “We used to go to the field when the air felt right. That is above 50 percent relative humidity.

How can I dry hay fast?

Lay the crop as wide as practical. Do not cut hay into a tight windrow. A wider swath will dry faster, because more drying area of the hay is exposed to sun and wind. Solar radiation cannot penetrate very deep into the swath.

Can you tedder alfalfa?

To dry quickly, alfalfa should be laid in as wide a swath as possible, Undersander says, and tedders will do that. Tedding alfalfa shortly after cutting, when the crop is typically about 75% water, helps minimize leaf loss. Once that level drops below 65%, leaves are too likely to shatter if tedded.

Is 4th cutting hay good?

The third cutting is good hay, and the fourth and fifth cuttings begin to have more stems and fewer leaves. As more stems are present, the quality of the hay decreases and palatability declines.

Which is better 1st or 2nd cut hay?

Hay is often cut three or more times each season. The first cutting in any cut will have thicker stems, perhaps have flowers (usually called tassel), and is the highest in fiber of any cut. The second cutting is softer, greener, has a higher protein but lower fiber than first cutting.

Is 1st or 2nd cut hay better for horses?

Timothy Hay

Timothy must be harvested in the pre- or early-bloom stage to ensure a high nutrient content. The first cutting usually has a higher weed content, and quality decreases after the second cutting, so the second cutting is usually the best to feed.