How many sq ft does a bag of cement cover?

A 50 pound bag of concrete would cover 1.25 square feet. A 40 pound bag of concrete would cover 1 square feet. On average, one sack or bag of concrete will cover approximately 1 to 2 square feet at 4 inches thick slab. One 80 pound bag of concrete would cover 2 square feet and 60 pound bag 1.5 square feet.

How many square feet will an 80lb bag of concrete cover?

An 80 pounds bag of Quirete's premixed concrete yields 0.60 cubic feet or 0.022 cubic yards, which will cover 3.6 square feet area upto standard depth of 2 inch. 2 inches in feet = 0.166 feet, so, coverage of a 80 pounds bag in square feet = 0.60 ÷ 0.166 = 3.6 square feet.

How many bags of concrete do I need for 100 square feet?

Number of cement bags are required for 100 sqft 6 inch slab = 11.4 bags.

How many square feet does a 50 lb bag of concrete cover?

A 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk. A bag of 50 pound yields 0.375 cubic feet, thickness of slab 3″= 0.25 feet, so, a 50 lb bag of concrete covers = 0.375 ÷ 0.25 = 1.5 square feet.

How many sqft does a bag of cement cover?

15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields . 30 cubic feet, 60 pounds of concrete mix yields . 45 cubic feet and an 80-pound bag yields . 60 cubic feet.

How many bags of concrete should I buy?

How many bags of cement do I need for 12x12?

As per calculation, for a 12×12 slab at 4 inch thick, generally you will need approximately either 104 bags of 60lb or 80 bags of 80lb of premixed concrete, at 5 inches thick slab, either 131 bags of 60lb or 100 bags of 80lb premixed concrete are required, while at 6 inches thick slab, either 157 bags of 60lb or 121 ...

How many bags of concrete do I need for a 10x10 slab?

At 4″ thick, for a 10×10 slab, generally, you will need 1.23 cubic yards or 33 cubic feet or either 74- 60lb or 56-80lb bags of premixed concrete.

How many bags of cement do I need calculator?

For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield.

How many square feet does a 60 lb bag of concrete cover?

60lb bag of concrete

A 60 lb bag of concrete is premixed of cement, sand and gravel as concrete which yields 0.45 cubic feet volume that is approximately equal as 0.017 cubic yards and it will cover around 1.8 square feet area of upto standard depth of 3 inch for your Patio or sidewalk.

How many bags of cement do I need for 800 square feet?

For a 800 sq ft rcc roof slab casting at 4 inch thick, generally you will need 55 bags (around 2765 kg) of cement which is approximately equal as 67.83 in cubic feet or in 1.92 cubic meter by using 1:2:3 (cement: sand: aggregate) mix to gain 3000 Psi compressive strength of concrete in 28 days.

How much concrete do I need for a 4x4 slab?

How much concrete do I need for a 4×4 slab?”, at 4 inches thick, generally you will need approximately 0.20 cubic yards or 5.28 cubic feet or 0.15 m3 (either 12 bags of 60lb or 9 bags of 80lb) of premixed concrete for a 4×4 slab, at 5 inches thick slab, 0.247 cubic yards or 6.66 cubic feet or 0.189 m3 (either 15 bags ...

How much cement do I need for 1000 square feet?

A 4 inch thick, 1000 sq ft slab will also require 76 to 114 bags of cement for construction.

How many yards of concrete do I need for a 24x24 slab?

For example, for a concrete slab that is 24' X 24' X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.

How do I calculate how much concrete I need?

How thick should a concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

How many 80lb bags of concrete does it take to make a yard?

One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete. If you have a project over a 1/2 a cubic yard you should consider our Mix On-site Concrete especially if you are hand mixing.

How much concrete do I need for a 3x3 slab?

At 4 inches thick, for a 3×3 slab, generally, you will need either seven- 60 lb or five- 80 lb or ten- 40 pound bags or 2.97 cubic feet or 0.11 cubic yards of premixed concrete.

How many bags of concrete do I need for a 10x10 slab 3 inches thick?

The amount of concrete you need for a 10 x 10 slab that's 3 inches thick is 1 cubic yard.

How many bags of concrete do I need for a 8x10 slab?

Regarding this, “how many bags of concrete do I need for a 10×8 slab at 4 inch thick?”, its depend on thickness of slab, at 4 inches thick, generally you will need approximately either 58 bags of 60lb or 45 bags of 80lb (0.98 cubic yards or 26.4 cubic feet or 0.748 m3) of premixed concrete for a 10×8 slab.

How many bags of concrete do I need for a 10x20 pad?

Regarding this, “how much concrete do I need for a 10×20 slab?”, at 4 inches thick, generally you will need approximately 2.44 cubic yards or 66 cubic feet or 1.969 m3 (either 144 bags of 60lb or 111 bags of 80lb) of premixed concrete for a 10×20 slab, at 5 inches thick slab, 3.07 cubic yards or 83 cubic feet or 2.35 ...

How many bags of concrete do I need for a 10x12 slab?

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yields, at 6 inch thick, for a 10×12 slab you will need 2.22 yards of concrete, so number of 80lb bag of concrete = 2.22 ÷ 0.022 = 101 bags, No.

Does a 10x10 concrete slab need rebar?

Do concrete patios need rebar? Even though it's possible to build a concrete patio without rebar, it's not recommended. All concrete is subject to cracks, but rebar holds all the cracks together and keeps the slab level and even. Without rebar, the cracks would become quite wide and the concrete would become uneven.

How many yards of concrete do I need for a 10x10 slab?

The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.