How many hours should I run my pool pump in the summer?

On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.

How long should pool pump run in hot weather?

So how long should the average pool pump run during the summer? To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours.

How many hours a day should I run my pool pump?

Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.

What is the best time of day to run your pool filter?

For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.

Is it OK to run pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.

How Many Hours Should You Run Your Pool Pump?

Does a pool pump use a lot of electricity?

Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.

Can I leave my pool pump off for a week?

So if you have to leave it running for a week it shouldn't make a big dent in the electric bill. Having to spend the money on getting the pool back in shape will probably cost more than leaving it on anyway. I would make sure you fill the pool water as high as you can though since you will be gone for a week.

Is it better to run your pool pump at night or day?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.

What is the cheapest time to run your pool pump?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

Should I turn off pool pump when raining?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.

How much electricity does a pool pump use per day?

A single-speed pump drawing 2,000 watts, operating at 3,450 rpms and generating a flow rate of 66 gallons per minute can turn over the entire 25,000 gallons of water in roughly 6.3 hours. At this rate the single-speed pump would consume 12,600 watt hours or 12.6 kWh per day, to turn over the pool.

How much does it cost to run a pool pump 24 hours a day?

12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.

How often should you backwash a pool?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.

How long should I filter my pool?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.

When should a pool pump run?

Yes, you want to run your pool pump for at least eight hours every day to complete at least one turnover cycle.

How long should pump run after shocking pool?

A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.

Can you swim with pool pump on?

Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.

How often should I shock my pool?

How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.

What time of day is water cheapest?

This is usually around 1:00 p.m. to 7:00 p.m on weekdays (Monday through Friday). Some companies may reduce rates for "partial-peak times," which are right before and after the peak hours (for example, from 10:00 a.m. to 1:00 p.m. or from 5:30 p.m. to 7:00 p.m.).

Should you backwash after shocking?

Steps for Preventing Algae

If your pool is used frequently, shock it at least once a week. Clean or backwash your filter regularly. Run your pool pump for at least 10 hours per day to completely circulate the water. Keep your phosphate levels below 100 ppb (parts per billion).

Can you put a chlorine tablet in the skimmer?

Never put chlorine tablets into the skimmer baskets of your pool. Some pool companies will put chlorine tablets directly into the skimmer baskets of the pool. Never allow anyone to put chlorine tablets in these skimmer baskets.

How long should you wait to swim after adding chlorine?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.

Why did my pool turn green overnight?

The most common reason pool water turns green is due to algae growing in the water. Algae can grow rapidly, particularly in hot weather, which is why it can surprise you overnight during the warmer months. This generally comes down to an imbalance or lack of chlorine in the water.

Should I turn off my pool pump when I go on vacation?

Keep the pump and filter on while you are away.

Set it before you leave to ensure the pool filter system will run at least 8 to 12 hours per day.

Is it OK to swim in a pool without chemicals?

Even from a health standpoint, it is simply not safe to operate a pool without some added “chemicals” to combat bacteria and contaminants in the water. A pool without chemicals is the perfect breeding ground for bacteria, viruses, and parasites.