How do you paint old concrete basement walls?

To paint your basement walls, you'll need a concrete primer and some water-resistant paint. Before you do any painting, clean the walls with a damp cloth and remove any mildew stains with bleach and warm water. Then, apply one coat of primer followed by 2 coats of paint, letting the walls dry in between coats.
Takedown request   |   View complete answer on wikihow.com


Is it OK to paint basement concrete walls?

I am talking about do not paint your foundation walls like concrete, brick, and block. Remember, most foundation walls allow lots of moisture and humidity into your basement. Many paints are not strong enough to hold back the hydrostatic pressure.
Takedown request   |   View complete answer on crawlspaceninja.com


What kind of paint do you use for basement concrete walls?

Masonry paint (also called elastomeric paint or elastomeric wall coating) is a good choice for concrete painting because it contains binders that contract and expand with the concrete. Exterior house paint can crack and peel on concrete.
Takedown request   |   View complete answer on houselogic.com


How do you paint old concrete walls?

How to Paint Concrete
  1. STEP 1: Patch gouged or otherwise damaged areas with concrete filler. ...
  2. STEP 2: Clean the concrete surface with TSP. ...
  3. STEP 3: Let the surface dry thoroughly before you begin to paint the concrete. ...
  4. STEP 4: Brush paint onto the perimeter of the concrete. ...
  5. STEP 5: Roll on more paint to cover the interior.
Takedown request   |   View complete answer on bobvila.com


How do you clean concrete basement walls before painting?

The best ways to clean concrete basement walls are tri-sodium phosphate, vinegar, cleansers, soap and water or hydrogen peroxide. Some products are multipurpose, acting as a cleanser, fungicide, and bactericide all in one. They won't harm the concrete, but they do break down tough stains like oil and grime.
Takedown request   |   View complete answer on gambrick.com


How to Prep, Prime,



Should you wash basement walls before painting?

Clean the walls

Once you've ensured your basement has been waterproofed and free of any harmful components like mold or water damage, you can begin preparing the walls for paint.
Takedown request   |   View complete answer on 21oak.com


How do you make concrete basement walls look good?

how to cover concrete walls in a basement
  1. using drywall and paint to cover concrete walls. ...
  2. painting the concrete or block wall. ...
  3. Brick veneer panels for basement walls. ...
  4. cover your walls with real barnboards. ...
  5. combination weathered wood and painted drywall. ...
  6. use wallpaper to finish your basement walls.
Takedown request   |   View complete answer on everything-about-concrete.com


Do I need to prime concrete wall before painting?

Generally speaking, priming is so essential to successful painting outcomes, concrete will always needs a primer. However, the existing surface needs to be primed before painting if: It is unpainted. It is peeling.
Takedown request   |   View complete answer on runyonsurfaceprep.com


Can you paint unfinished basement walls?

For a cost-effective alternative to applying drywall, painting an unfinished basement is possible. Painting your unfinished walls, ceiling, and floor will take less time and require fewer supplies than drywall.
Takedown request   |   View complete answer on homedecorbliss.com


Is painting concrete a good idea?

Advantages to Painting Concrete

Concrete paints and stains help to mask surface discoloration and signs of wear and tear and they extend the life of concrete by preventing further damage. Coating a concrete surface with paint can also make for easier cleaning and maintenance.
Takedown request   |   View complete answer on reliablehomeimprov.com


Can you use Drylok over old paint?

Yes and no. DRYLOK® may be used over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside. However, DRYLOK® cannot be used over an oil or latex-based paint on the inside of a building.
Takedown request   |   View complete answer on drylok.com


How do you paint over peeling paint on concrete?

How to Repaint Concrete Floors
  1. Remove all flaking, peeling paint using a scraper and wire brush. ...
  2. Fill all holes and cracks with mortar. ...
  3. Thin the paint to be used for the first coat according to the manufacturer's instructions. ...
  4. Apply paint to the outer edge of the floor using a 3-inch, angled paintbrush.
Takedown request   |   View complete answer on homeguides.sfgate.com


How do you prepare concrete for painting?

The following steps are critical before painting any type of concrete.
  1. Clean the Area. ...
  2. Apply an Etching Solution. ...
  3. Fill All Cracks. ...
  4. Apply Concrete Sealer if You Don't Want a Painted Surface. ...
  5. Thorough Wash and Moisture Test. ...
  6. Purchase the Right Paint. ...
  7. Apply Two Coats.
Takedown request   |   View complete answer on drylok.com


What is the cheapest way to finish a basement wall?

If you're wondering if paneling or drywall is the cheaper finishing option, generally speaking, drywall is cheaper than paneling. This is because it requires less attention to detail and finish work during the installation process. Drywall also adds better soundproofing than paneling, and it's easier to repair.
Takedown request   |   View complete answer on realhomes.com


What should you paint basement walls with?

Top 8 Best Paint For Concrete Basement Walls
  • Aqua-X Concrete Sealer.
  • Kilz Interior/Exterior Basement And Masonry Waterproofing Paint.
  • Rust Bullet Duragrade.
  • Drylok.
  • KILZ Interior/Exterior Self-Priming Masonry, Stucco, and Brick Flat Paint.
  • Eco Advance EACON16CON Waterproofer.
  • Rust-Oleum 261845 EpoxyShield Garage Floor Coating.
Takedown request   |   View complete answer on propaintcorner.com


Should you use DRYLOK on basement walls?

Once the basement is completely dry, all the holes are plugged and the windows and doors are caulked, it's time to paint the walls with a waterproof sealer. DRYLOK® Extreme Masonry Waterproofer is the perfect solution to stop water infiltration through basement walls, and it's easy to apply.
Takedown request   |   View complete answer on drylok.com


How do you make an unfinished basement look nice?

16 Finishing Touches for Your Unfinished Basement
  1. Better Your Basement. 1/18. ...
  2. Lay Down Foam Mats. 2/18. ...
  3. String Some Lighting. 3/18. ...
  4. Throw Down Area Rugs. 4/18. ...
  5. Install Storage. 5/18. ...
  6. Paint Your Cinder Block. 6/18. ...
  7. Hang Curtains. 7/18. ...
  8. Create an Art Studio. 8/18.
Takedown request   |   View complete answer on bobvila.com


How do you cover unfinished basement walls?

Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2x4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.
Takedown request   |   View complete answer on bhg.com


What is the best paint to use for concrete?

The best kind of paint to use on a concrete floor is epoxy paint because of its durability. You can also use latex paint, though it won't hold up as well as epoxy. Acrylic paint also works well, especially for exterior concrete walls as it can withstand harsh weather.
Takedown request   |   View complete answer on thespruce.com


What type of paint is good for concrete?

Epoxy-based paints provide high durability and stain resistance, making them ideal for garage or patio floors. Masonry paints are designed for brick and other masonry applications, but also provide effective coatings for concrete.
Takedown request   |   View complete answer on homedepot.com


Can you use Kilz on cement?

Yes, you can use a bonding Primer from KILZ on your concrete floor. In order to improve the adherence of masonry coatings, KILZ Concrete & Masonry Bonding Primer was developed. Concrete, masonry , stucco, cinder block, and any porous stone or brick may all be utilised with this product.
Takedown request   |   View complete answer on bagofconcrete.com


How can I cover my concrete walls cheap?

Parge Coat. A parge coat is a cheap way to cover up concrete walls both inside and out. A parge coat is a thin coating of cement that's applied over masonry walls. It goes on kind of like the frosting on a cake.
Takedown request   |   View complete answer on gambrick.com


How do you make an old basement look good?

10 Affordable Ideas for Your Unfinished Basement
  1. 10 Ideas for your Unfinished Basement.
  2. 1 | Hide Mechanicals. ...
  3. 2 | Install Electrical Outlets. ...
  4. 3 | Deep Clean the Basement. ...
  5. 4 | Add Overhead Lighting. ...
  6. 5 | Paint the Exposed Ceiling. ...
  7. 6 | Paint the Basement Walls. ...
  8. 7 | Paint the Basement Concrete Floors.
Takedown request   |   View complete answer on buildingbluebird.com


How do you cover rough concrete walls?

  1. Sand any particularly bad areas of concrete with rough-grit sandpaper. ...
  2. Roll liquid concrete bonding agent over the surface of the wall in fairly straight lines using a short-napped paint roller. ...
  3. Trowel a 3/8-inch layer of concrete over the wall with a straight trowel.
Takedown request   |   View complete answer on hunker.com


Can I use latex paint on concrete basement walls?

Ordinary latex paint is well-suited for interior concrete walls. Use an eggshell or satin latex paint on concrete walls that aren't exposed to much duress. For concrete walls within weight rooms, work rooms and kids' play rooms, choose a semi-gloss latex paint that will resist stains.
Takedown request   |   View complete answer on ehow.com
Previous question
Does Bowser have a brother?
Next question
Is 1883 based on a true story?