How do you get thick brown stains out of a toilet?

White vinegar and borax/baking soda
  1. Sprinkle baking soda or borax generously on the stained areas.
  2. Use the toilet brush to scrub a little bit and spread the powder around.
  3. Add approximately 1½ cup of white vinegar into the bowl.
  4. Leave the solution to work for 15-30 min.
  5. Rinse.
  6. Repeat if there are still visible stains.
Takedown request   |   View complete answer on fantasticservicesgroup.com.au


How do you get rid of hard brown stains in toilet?

Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Takedown request   |   View complete answer on home.howstuffworks.com


How do you clean an extremely stained toilet?

Mix equal parts baking soda and white vinegar in a bowl. Use a rag to apply the baking soda and vinegar mixture to the stains. Slowly pour 1 gallon of boiling water into the bowl. Let it sit for at least an hour before scrubbing with a toilet brush.
Takedown request   |   View complete answer on hunker.com


What will dissolve the brown stains in bottom of toilet?

To remove brown stains in the toilet, you may want to turn to a heavy-duty acid cleaner that will dissolve the rust. But a harsh form of acid could damage your toilet, as could vigorous scrubbing. Instead, try pouring half a gallon of white vinegar into the bowl to tackle stains on the bottom.
Takedown request   |   View complete answer on housedigest.com


How do I get my toilet white again?

Combine 2 parts borax with 1 part lemon juice to form a paste. Smear the paste onto any remaining stains in the bowl, such as the ring formed around the waterline. Borax cleans while lemon juice whitens. Leave the paste to soak for two hours to lighten stains and whiten the bowl.
Takedown request   |   View complete answer on homeguides.sfgate.com


3 ways to clean brown stubborn stains and limescale from toilet bowl



What causes brown stain in bottom of toilet bowl?

The brown stain in the bottom of the toilet bowl comes from hard water, which is water that contains a high concentration of minerals. The minerals include calcium compounds, but the ones most responsible for brown stains are iron and manganese compounds. Iron oxide, or rust, is the main culprit.
Takedown request   |   View complete answer on hunker.com


Does WD 40 remove hard water stains in toilet?

You can use WD-40 to break down tough lime stains or hard water lines in your toilet bowl. First, spray a small amount of WD-40 into the bowl, let it sit for a few minutes, then scrub the stains or water lines with your toilet brush. After flushing your toilet, the stains should disappear.
Takedown request   |   View complete answer on littleupgrades.com


Will Coke clean a toilet?

That's right. The fizzy drink can actually remove hard-to-clean stains on the inside of a toilet bowl. You can either pour cola directly onto the stains themselves or cover the entire inside of the bowl by putting cola into a spray bottle and spraying on a light coating.
Takedown request   |   View complete answer on cnet.com


Why should you put dish soap in your toilet at night?

This is Why it Works

It's pretty simple — just like they do on food particles that are stuck to your dishes in the sink, the combination of hot water and dish soap help to dissolve and break up whatever it may be that is lodged in the toilet causing a clog. This handy tip is great should you find yourself in a pinch.
Takedown request   |   View complete answer on apartmenttherapy.com


How do you clean a badly stained toilet UK?

Here's how to clean a stained toilet quickly.
  1. Use toilet cleaner on the rim and sides. Put on your rubber gloves, lift up the toilet seat, and squirt your toilet cleaner around the rim and the sides.
  2. Scrub the toilet with the toilet brush. ...
  3. Wipe the seat and lid. ...
  4. Wipe the outside. ...
  5. Bin or flush.
Takedown request   |   View complete answer on cleanipedia.com


What is the best cleaner for hard water stains in toilet?

Baking soda and vinegar are two of the most useful household products that can be used to clean many things, including hard water stains in the toilet. 1 . Pour about 1 cup of vinegar into the toilet bowl and swish it around with a toilet brush. Let it sit for about one minute.
Takedown request   |   View complete answer on thespruce.com


How do you remove mineral deposits from a toilet?

Here's what you need to do:
  1. Grab the Borax and pour ¼ cup into your toilet bowl. Then, using a toilet brush, swish it around.
  2. Add 1 cup of vinegar. Allow the solution to sit in your toilet bowl for about 20 minutes.
  3. Use a toilet brush to scrub the bowl clean and eliminate any remaining stains.
Takedown request   |   View complete answer on build.com


Will vinegar remove rust from toilet bowl?

From mildew to hard-to-tackle calcium deposits, vinegar is an inexpensive, natural cleaner that dissolves a range of bathroom offenders, including toilet tank rust.
Takedown request   |   View complete answer on thisoldhouse.com


How long do you leave vinegar in toilet bowl?

To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl. While the mixture is bubbling up, scrub the bowl (get under the rim, too). Let it soak for 30 minutes and flush. That's it.
Takedown request   |   View complete answer on washingtonpost.com


Does vinegar damage toilet bowls?

Vinegar will not harm your toilet's tank, bowl or inner components. The substance is safe to use and removes dirt, grime and mineral stains, and it deodorizes toilets without the need for purchasing and using a commercial toilet cleaner. Fill a spray bottle with full strength vinegar.
Takedown request   |   View complete answer on hunker.com


Does WD-40 remove rust stains from toilets?

When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Takedown request   |   View complete answer on wd40.com.au


How do you remove brown stains from porcelain?

  1. STEP 1: Gently clean with liquid soap and dry.
  2. STEP 2: Skip scrubbing, and remove discoloration using bleach on white porcelain and hydrogen peroxide on colored porcelain sinks.
  3. STEP 3: Tackle deeper stains with a mild abrasive.
  4. Lift metal stains with a little bit of acid or naval jelly.
Takedown request   |   View complete answer on bobvila.com


Does CLR remove rust from toilet?

As Ann discovered, CLR Calcium, Lime & Rust Remover is a great way to clean away calcium and lime deposits as well as scale and rust from your toilet.
Takedown request   |   View complete answer on clrbrands.com


Can I use Dawn to clean my toilet?

UNCLOGGING TOILETS

Pour a cup of Dawn liquid dish detergent into the toilet bowl and let it sit for 15 minutes. After 15 minutes, pour a bucket of hot water from waist height into the toilet bowl to clear it out.
Takedown request   |   View complete answer on classiccleaners.net


Can I put dishwasher pods in toilet tank?

Dishwasher tablets are meant to dissolve hard water stains, so they're the perfect solution for cleaning toilets. Besides cleaning dishes and toilet bowls, you can use dishwasher tablets for a few more cleaning projects around the house.
Takedown request   |   View complete answer on tasteofhome.com


Is it okay to put Fabuloso in your toilet tank?

The Bottom Line

Putting a bottle of Fabuloso in the toilet tank is not dangerous, but it's not good for the overall toilet performance. It has a couple of negative consequences – it decreases the capacity of the tank and may even damage your toilet's components in the long run.
Takedown request   |   View complete answer on bomisch.com