How do you get the smell out of well water?

Increase the water heater temperature to 160 degrees Fahrenheit (71 degrees Celsius) for several hours. This will destroy the sulfur bacteria. Flushing to remove the dead bacteria after treatment should control the odor problem.
Takedown request   |   View complete answer on health.state.mn.us


Is it normal for well water to smell?

Certain “sulfur bacteria” in the groundwater, in the well water itself, or in the plumbing system can create this gas that smells bad. Chemical reactions inside water heaters can also produce sulfur bacteria. In rare cases, pollution can cause the gas to form. Sulfur bacteria are not harmful.
Takedown request   |   View complete answer on floridahealth.gov


Why did my well water started stinking?

What Causes the Sulphur Smell in Well Water? The main reason for the smell is sulfur bacteria or hydrogen sulfide. Sulfur bacteria are found in environments that lack oxygen, like deep wells. You'll also find such issues in areas having plumbing systems and organic matter.
Takedown request   |   View complete answer on trianglegardener.com


How do you get rid of sulfur smell in water?

Chlorine bleach can effectively remove medium to high levels (over 6 mg/l) of hydrogen sulfide. The chlorine in the bleach chemically reacts with (oxi- dizes) the hydrogen sulfide eliminating the "rotten egg" odor. Chlorine bleach also reacts with iron or manganese, and disinfects water supplies.
Takedown request   |   View complete answer on extension.purdue.edu


Why does my well water smell like sewer?

If your cold well water smells like sewage, it can be the result of several causes: Hydrogen sulfide from iron, sulfur or other types of bacteria naturally occurring in your well water. Contaminated pipes with layers of bio-film caused by various types of iron, sulfur, or other types of bacteria.
Takedown request   |   View complete answer on cleanwaterstore.com


HOW to Get Rid of SULPHUR SMELL from WELL WATER



How much bleach is needed to shock a well?

CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.
Takedown request   |   View complete answer on extension.uga.edu


How do you chlorinate well water?

Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.
Takedown request   |   View complete answer on wellwater.oregonstate.edu


Is it safe to drink well water that smells like sulfur?

If the sulfur level in your drinking water is not too high, it shouldn't lead to any health issues. However, too much sulfate could lead to the following problems: Diarrhea and dehydration: Drinking water with a high sulfate content can have a laxative effect and lead to diarrhea, which can then cause dehydration.
Takedown request   |   View complete answer on longsecowater.com


What type of filter removes sulfur smell from water?

There are two main filtration methods available for removing hydrogen sulfide from water which includes using different variations of activated carbon and manganese dioxide media to treat the water. Activated carbon is an effective option when the amount of hydrogen sulfide in the water is low, around 1ppm.
Takedown request   |   View complete answer on freedrinkingwater.com


How do you remove hydrogen sulfide from well water?

Aeration. Since hydrogen sulfide occurs as a gas in water, it can be physically removed by injecting air into the water and allowing the gas to escape. Aeration units may work by cascading, bubbling, or stripping the gas from the water.
Takedown request   |   View complete answer on extension.psu.edu


Will Shocking well get rid of sulfur smell?

1. Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors. Often keeps odors away for 1 – 2 months.
Takedown request   |   View complete answer on cleanwaterstore.com


How do you treat well water?

Shock chlorination is the process by which home water systems such as wells, springs, and cisterns are disinfected using household liquid bleach (or chlo- rine). Shock chlorination is the most widely recommended means of treating bacterial contamination in home water systems.
Takedown request   |   View complete answer on aesl.ces.uga.edu


How do you get rid of sulfur smell?

Treatment
  1. keep the affected area of skin clean and dry.
  2. use antiperspirant.
  3. wash regularly with antibacterial soap.
  4. use a deodorant to mask the odor.
Takedown request   |   View complete answer on medicalnewstoday.com


How do you make well water taste better?

How Do You Treat Smell And Taste In Water? You can help remove smells and taste by adding powdered activated carbon (GAC) to water or using granular activated carbon to make the water filter. Usually, powdered activated carbon (PAC) is better when the taste and odor aren't too strong or infrequent.
Takedown request   |   View complete answer on groundwatergovernance.org


How do I shock my well water?

You can easily shock your well by adding plain unscented household bleach with a chlorine concentration of 5 to 5.25%. The amount of household bleach used varies with the type of well you have.
Takedown request   |   View complete answer on phsd.ca


How often should you chlorinate your well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria.
Takedown request   |   View complete answer on skillingsandsons.com


Will a water softener remove sulfur smell?

It is better just to use a softener to soften the water and then have a separate system to remove the rotten egg odor, such as an Air Charger Sulfur Filter, or an Aeration Tank.
Takedown request   |   View complete answer on cleanwaterstore.com


Do water filters remove smells?

Still, who wants to drink smelly water? “Fortunately, most water filter pitchers do a great job at removing these flavors and odors,” says Joan Muratore, CR's lead tester for water filters.
Takedown request   |   View complete answer on consumerreports.org


Why does my well water smell like rotten eggs?

If your water smells like rotten eggs, that likely indicates the presence of hydrogen sulfide gas. This could be due to a problem with your water heater or naturally occurring sulfur bacteria, especially in well water. These issues can produce hydrogen sulfide, which leaves an unpleasant scent wherever it goes.
Takedown request   |   View complete answer on culligan.com


Does Brita filter remove sulfur?

Does a Brita filter remove sulfur smell? Brita® faucet filters reduce lead, chlorine, asbestos, benzene, particulates and other contaminants. Activated carbon filters at the tap or for the entire house can remove small amounts of hydrogen sulfide, so these are best for water in which the sulfur smell isn't too strong.
Takedown request   |   View complete answer on dekooktips.com


Can I pour bleach in my well?

Disinfection Procedure. Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one.
Takedown request   |   View complete answer on pubs.nmsu.edu


What is a natural way to clean well water?

You can boil the well water for 5 minutes. With this, all the bacteria inside it will be eliminated. However, boiling will not be able to remove the solids and other materials inside the well water. The use of chlorine drops or iodine tablets can effectively kill the bacteria in the well water.
Takedown request   |   View complete answer on theberkey.com


Should you put bleach in your well?

Disinfecting Your Water

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.
Takedown request   |   View complete answer on clallam.net


How long after bleaching well can I shower?

Step 6 WAIT at least 12 hours before turning faucets back on. Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it.
Takedown request   |   View complete answer on web.uri.edu


How long after bleaching well Can I drink water?

Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER. CONTACT WITH THE WATER MAY CAUSE SKIN, EYE AND NOSE IRRITATION. 12.
Takedown request   |   View complete answer on albertahealthservices.ca
Previous question
How are pets shipped in cargo?