How do you adjust the ecobee sensor?

From the thermostat, select: Menu > Settings > Installation Settings > Thresholds, and then choose Temperature Correction. This will allow you to adjust the thermostat and sensors' overall temperature up or down according to your needs.

How do I calibrate my ecobee sensor?

How do you set the ecobee Smart sensor?

Are ecobee sensors accurate?

The ecobee temperature sensor has a +/- 1.0F accuracy and is programmed to provide readings every 15 seconds.

How do you reset an ecobee sensor?

How To Connect Ecobee Sensor (Ecobee SmartSensor)

How do the ecobee sensors work?

The remote sensors do not include a humidity sensor, but the ecobee does. The motion sensors are passive infrared motion sensors. This means they use the natural infrared radiation given off by all objects as a means of detecting motion, and therefore work regardless of light or dark.

How do I know if my ecobee sensor is working?

1) Gently pull the plastic tab on the back of the sensor. 2) Look for a message on your ecobee's screen. The 4-digit ID should match the 4-digit code on the back of your sensor. Tap Pair now to confirm pairing.

Can you calibrate an Ecobee thermostat?

Go to the menu on your Ecobee screen. Select 'Installation settings' from the 'Settings' menu. Now go to 'Thresholds' and select 'Temperature Correction'. You can adjust the temperature to what you see fit.

How does Ecobee sensor detect occupancy?

The sensors read the temperature in the room and measure room occupancy to determine if that room's temperature reading should be considered. To get the most out of your sensors, we have provided information on how long they stay occupied. In Follow Me mode, Ecobee sensors stay occupied for 30 minutes.

How long does it take the ecobee to calibrate?

The “Calibrating” message on your Ecobee Thermostat screen indicates that it is measuring current indoor temperature. Ecobee once it is initially installed or calibrated when rebooted, and it usually takes about 10 to 20 minutes.

How does a smart sensor work?

Smart sensors work by capturing data from physical environments & changing their physical properties like speed, temperature, pressure, mass, or presence of humans into calculable electrical signals. These sensors include a Digital Motion Processor (DMP).

What are ecobee comfort settings?

Essentially, Comfort Settings are a predefined heat/cool setting that can be applied to a specific period of a day. The activity and the comfort setting work together to determine what temperature is maintained and for how long.

How long do ecobee sensors last?

CR2032 are the little silver coin shaped batteries used in the old ecobee Room sensors. The sensor will run for at least 18 months. The CR2477 used in the new Smart Sensors should last for five years.

What does Snowflake mean on ecobee?

An icon on the main screen indicates which system mode your thermostat is in. A snowflake indicates “Cool” and a flame indicates “Heat”.

Will ecobee work without sensors?

Note: You can only remove the ecobee as a participating sensor if you have at least one room sensor participating in the particular Comfort Setting you are trying to adjust, otherwise you will not be able to make these changes.

How does ecobee average temperature?

Your ecobee smart thermostat will attempt to heat or cool your house to approximately 71 degrees as a middle ground. The more room sensors you have — which you can pair up to 32 with one thermostat — the more information your ecobee thermostat has to calculate a comfortable average.

Should ecobee be set to auto?

Auto mode on your ecobee thermostat is great for maintaining a comfortable home temperature in milder climates or in-between heating and cooling seasons.

What is the best differential setting for thermostat?

To optimize both temperature- and humidity-comfort control, and to protect against excessive equipment cycling, the cooling differential should be between 0.8°F and 2°F; the heating differential should be between 0.5°F and 1°F. A heating differential below 0.5°F is too narrow and causes excessive cycles.

What percentage is ecobee?

Humidity. Sets the percentage of relative humidity at which your ecobee will generate a Low/High Humidity Alert. Network. Possible network issues.

What is the difference between sensor and smart sensor?

The difference between a normal sensor and a smart sensor is that a smart sensor is embedded with a Digital Motion Processor or DMP. A smart sensor can accept input from external sources and use pre-built functions to detect a specific combination of inputs. A regular sensor does not include a DMP.

What is smart away on ecobee?

What is it? With Smart Home/Smart Away enabled, when your thermostat senses you're home during a scheduled Away period or away during a scheduled Home period, it will automatically override your schedule for comfort (Smart Home) or savings (Smart Away).

What is the configuration of a smart sensor?

Explanation: A smart sensor configuration contains physical transducer, network interface, processor and memory. 3. A/D conversion is not needed in the smart sensor. Explanation: Smart sensors include conversion of input analog value to a digital value.