How do I fix a blinking blue light on my HP printer?

A flashing blue light would indicate the printer has not made a proper wireless connection. Touch the wireless icon at the top of the printer's screen and check the connection and re-enter the connection information if needed.
Takedown request   |   View complete answer on h30434.www3.hp.com


How do I fix the flashing light on my HP printer?

Follow these steps to reset the printer.
  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Unplug the power cord from the wall outlet.
  3. Wait at least 15 seconds.
  4. Plug the power cord back into the wall outlet.
  5. Reconnect the power cord to the printer.
  6. Turn the printer on.
Takedown request   |   View complete answer on support.hp.com


What does blue light mean printer?

• Solid blue light indicates that wireless connection has been established and you can print. • Slow blinking light indicates that wireless is on, but the printer is not connected to a network.
Takedown request   |   View complete answer on cdn.cnetcontent.com


Why is my HP printer not connecting to WIFI?

Make sure paper is loaded in the main tray, and then turn on the printer. From the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings. Get the network name and password. Go to Find the wireless network password or PIN to connect an HP printer for more information.
Takedown request   |   View complete answer on support.hp.com


How do I reset my HP wireless printer?

Use the Wireless and Cancel buttons to restore Wi-Fi setup mode.
  1. Press the Cancel button to ready the printer.
  2. Press and hold the Wireless button and the Cancel button at the same time for three seconds until the printer restarts. ...
  3. After the printer restarts, wait 60 seconds until the Wireless light blinks blue.
Takedown request   |   View complete answer on support.hp.com


HP Printer Blue Light blinking.



What is a cold reset for an HP printer?

On HP printers, a "cold reset" causes the printer to return to its factory default settings, which among other things, causes it to try and retrieve its configuration information from a BOOTP server.
Takedown request   |   View complete answer on kb.mit.edu


How do I get my HP printer to recognize my wireless network?

Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)
  1. Place the printer near the Wi-Fi router.
  2. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.
  3. Select the name of your network, and then enter the password to complete the connection. Note:
Takedown request   |   View complete answer on support.hp.com


How do I get my HP printer back online?

Restart your printer by turning it off, waiting 10 seconds, and disconnecting the power cord from your printer. Then, turn off your computer. Connect the printer power cord to the printer and turn the printer back on.
Takedown request   |   View complete answer on hp.com


How do I get my printer back online?

How to get your printer back online.
  1. Turn off the printer and unplug the power cord from the printer itself.
  2. Turn off the computer.
  3. Wait 30 seconds and turn on the computer.
  4. Plug the printer power cord back into the printer and turn the printer on.
  5. Check the functionality of the printer.
Takedown request   |   View complete answer on bestbuy.com


Why is my HP printer not printing?

You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.
Takedown request   |   View complete answer on drivereasy.com


Why is my Printers on button flashing?

Fast blinking power lights indicate that there might be an error with the printer. The flashing resume light is the indicator that the paper jam or an empty paper tray. Due to the broken parts of the printer or any internal error, the printer light starts blinking.
Takedown request   |   View complete answer on techsupportexpert.com


Why is printer not connecting to WIFI?

Remove and Re-Add Your Printer in Windows

If this happens, go to Settings > Devices > Printers & Scanners, select your printer, and remove it. Then click the Add a Printer or Scanner button to re-add it to the device list. Incredibly (and frustratingly), this often gets things up and running again.
Takedown request   |   View complete answer on pcmag.com


What do the lights on my printer mean?

There are two indicator lights on the printer: the Status light and the Charging light. Each indicator light shows the status of the printer as described below. Status indicator light: A blue or green light indicates the printer is operating correctly, while a red light indicates an error has occurred.
Takedown request   |   View complete answer on support.brother.com


What does a flashing power button mean on a HP printer?

The Power light ( ) might blink (flash) or be off. A blinking Power light indicates that the product requires maintenance, or is in an error state.
Takedown request   |   View complete answer on support.hp.com


What to do if printer is not responding?

How do I fix my printer, not responding? (Windows)
  1. Make your printer the default option. Click on the Start button and then go to Settings > Devices > Printers & scanners. ...
  2. Clear Print queue. ...
  3. Restart Print Spooler Service. ...
  4. Re-Add your printer to your PC. ...
  5. Restart your Windows PC.
Takedown request   |   View complete answer on yoyoink.com


Why is my computer not finding my wireless printer?

If your computer can't detect your wireless printer, you can also try to fix the problem by running the built-in printer troubleshooter. Go to Settings > Update & Security > Troubleshooter >run the printer troubleshooter.
Takedown request   |   View complete answer on windowsreport.com


Is there a reset button on HP ink cartridges?

Press the "On" button on your printer to turn it on, wait 20 seconds, then turn it off. Allow the printer to completely turn off. Repeat this step five times so that the HP cartridge identification information will be erased from the printer's memory.
Takedown request   |   View complete answer on techwalla.com


What is warm reset?

Warm reset : This is when you hit restart in your phone while turning it Off. well same as Cold reset but here a Restart flag is set which makes the phone gets restarted by itself. turning all the apps down and bringing all the background apps up.
Takedown request   |   View complete answer on quora.com


How do I reset my HP printer after refilling ink?

You can reset your HP printer in two ways.
...
Here's how to do it:
  1. Place the refilled ink cartridge into the printer.
  2. Proceed to print out an alignment page. ...
  3. Safely remove the ink cartridge from your printer.
  4. Take one of your old compatible cartridges and proceed to print out an alignment page. ...
  5. Remove the second cartridge.
Takedown request   |   View complete answer on alphr.com


How do I connect my HP printer to my computer?

Plug the cable into your printer and your computer's USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation. If your computer is still unresponsive, make sure you have enabled automatic device installations.
Takedown request   |   View complete answer on hp.com


Why is the power button flashing on my HP Deskjet 2600 printer?

The product is preparing a print job. The Power light blinks while the product receives the data. The front access door is open.
Takedown request   |   View complete answer on support.hp.com


How do I get my HP printer to print?

How to Print
  1. Select the file you want to print and open the file so it appears on your computer screen.
  2. Press the Ctrl and P buttons on your keyboard at the same time.
  3. Once the printing pop-up menu appears on your computer screen, select the printer you intend to send the job to.
  4. If needed, modify your print settings.
Takedown request   |   View complete answer on support.hp.com
Previous question
Why can't I speak my thoughts?
Next question
What is an M shaped lip?