How do I change my tour v4 from meters to yards?

To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters (for details on the Slope feature, see “About Tour V4 Shift with Slope Technology”).

How do I change my Bushnell Tour V4 from meters to yards?

While looking through the eyepiece, press and hold the POWER button down for approximately 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress the power button, the display will toggle back and forth between Yards and Meters.

How do I change my golf rangefinder from meters to yards?

To select between yards and meters, press and hold the POWER/FIRE button. The display will begin to cycle through the setup options: Yards w/JOLT, Yards, Meters w/JOLT, Meters (for details on the JOLT feature, see “About JOLT”).

How do you change the slope on a tour V4?

On the Tour V4 Slope the function is disabled by clicking and holding the main power button on top to change the settings to make it legal for use in tournament play.

How do I change my Bushnell Hybrid from meters to yards?

UNIT OF MEASURE (YARDS/METERS)

To select your preferred units, start with the unit powered off. Press and hold down the Power/FIRE button until you feel the “Jolt” vibration (about 7 seconds)-the “Y” (Yards) will blink. Continue to hold the FIRE button until you see the units switch to “M” (meters), then release it.

Viewers Question: Convert metres to yards

How do I change the settings on my Bushnell Tour V4?

MODE and UNIT OF MEASURE OPTIONS

To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters (for details on the Slope feature, see “About Tour V4 Shift with Slope Technology”).

How do I change my Bushnell from meters to yards?

To select between yards and meters, look through the monocular, depress the "mode" button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.

How do you reset a Bushnell V4 rangefinder?

- Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen.

Does Bushnell Tour V4 have slope?

Bushnell Golf brings you the next evolution of PinSeeker with JOLT in the Tour V4 Rangefinder with Slope. The Tour V4 Slope gives you Bushnell's patented, Tour trusted Slope Technology, that provides compensated distance based on hole's incline/decline.

Can you turn off slope on Bushnell V4?

To turn off the slope function just hold down the power button, which will cycle through all of the modes. Once you see yards with no slope meters, release the power button and your device will be legal for tournament play.

How do you change from meters to yards?

Multiply the number of meters by 1.0936 to get the number of yards. There are 1.0936 yards in every meter. So if 1 meter is 1.0963 yards, then 2 meters is 2.1872 yards, and so on.

How do you change nx2 from meters to yards?

Press and hold the green POWER button for three seconds to change between yards and meters.

How do I change my Bushnell from meters to feet?

SELECTING UNIT OR MEASURE (YARDS/METERS/FEET)

To select a different unit of measure, start with the rangefinder powered off. Press and continue to hold the Fire button. “Y”, “M” or “FEEt” will begin flashing, with the display slowly cycling through these 3 unit options (5,7b).

Can I use the Bushnell Tour V4 for hunting?

Bushnell Tour V4 Laser Rangefinder Review Summary

If you're looking for something you can use any time of the day and enjoy plenty of hunting-friendly features, this isn't the rangefinder for you. On the other hand, if you want an easy-to-use model that's simple and straightforward, look no further.

How do I change my Bushnell Pro XE from meters to yards?

Turning Slope mode on and off is as easy as sliding the Slope Switch left or right. You can turn on Elements Mode with a single touch of the Mode button. Holding Mode brings up the menu for adjusting brightness and toggling between yards and meters. Overall, the Bushnell Pro XE is intuitive and easy to use.

How do I update my Bushnell?

You can now quickly and easily update an individual Course on your Bushnell Device – simply select 'UPDATE GOLF COURSE' (located at the top of the 'MY DEVICE' page), enter the name of the course in the Search Bar near the top and select the course from the dropdown list.

Is Bushnell Tour V4 Waterproof?

The Tour V4 slope is water-resistant, whereas Bushnell's other premium rangefinders (Tour X, Pro X7, Pro X7 Jolt, Tour Z6 Jolt) are rainproof or waterproof.

How do I change my Bushnell Tour V3?

How do you use Bushnell Yardage Pro?

Aim the BUSHNELL YARDAGE PRO at a target at least 20 yards away, depress and hold the power button down until range reading is displayed. Release the power button. Note: Once activated, the BUSHNELL YARDAGE PRO's LCD will remain active and display the last distance measurement for 30 seconds.

Does Bushnell Tour V4 have jolt?

Bushnell Tour V4 Overview

The Bushnell Tour V4 features the perfect combination of size, speed, accuracy and JOLT.

Where is a serial number on Bushnell Tour V4?

Open the Bushnell Golf App and add your rangefinder as a device. The first field is the serial number from the bottom of the device.