Does belt dressing ruin belts?

Belt dressing, and other oils and solvents, may quieten the belt noise when first applied, but these oils will actually cause the belt's rib surface to become more aggressive once they dry out, leading to even more belt noise issues.

Is belt dressing good for belts?

Spraying belt dressing on a belt softens the rubber and keeps it from drying out and slipping. You can use it on lawn mower drive and deck belts, tiller, tractor, and automotive belts to keep them limber and to prolong their life. It can also prevent and stop squeaks caused by a slipping belt.

Is belt dressing a lubricant?

Belt dressing limits friction between parts and stops squeaking sounds in running machinery. These lubricants are ideal for flat, round, or V-shaped belts in leather, rubber, or canvas.

What can be used instead of belt dressing?

anyway you can use silicone spray. Ivory soap works wonders. Dish soap or you could try putting it on propperly.

Is it OK to spray wd40 on car belts?

The WD-40® Belt Dressing Spray delivers better grip and traction for all types of old and used belts, including ribbed belts, V-belts and cogged belts. When used regularly and correctly, the drive belt conditioner will eliminate any squeaking and slipping.

Belt Dressing - WD-40 Specialist Automotive Range

Why does Belt Dressing makes it worse?

Today, you should never put belt dressing on an EPDM-made serpentine belt. Belt dressing, and other oils and solvents, may quieten the belt noise when first applied, but these oils will actually cause the belt's rib surface to become more aggressive once they dry out, leading to even more belt noise issues.

Does oil ruin serpentine belt?

Oil on a serpentine belt or pulley can cause it to come off, as well as cause rubber to swell and degrade over time. If you see an oil slick under your car, wipe it up as well.

Can I use silicone spray on my serpentine belt?

Trusted mechanic suggested spray silicone to quiet squealing belt. Tried it and it worked. Did it several times over a period of about 6 months or so. Serpentine belt broke most of the way across and beat the underhood mat up.

Can you lubricate timing belt?

Though timing belts don't need lubrication, you can lubricate a timing chain. This keeps the rotational system of the crankshaft and camshaft(s) running smoothly. DIY Car Service Parts stocks a wide range of lubricants so that you can maintain your car's health.

What happens if you get oil on a belt?

Oil on the belt could cause the belt to slip. If it slips while you are turning the steering wheel, then the steering could become difficult to turn due to a loss of power steering. This could take you by surprise and hence be dangerous.

Does power steering fluid damage serpentine belt?

It won't hurt anything. Just drive the car and forget about it.

Can I spray brake cleaner on belt?

If the belt is worn out, you can clean it with brake cleaner, but it might cause it to crack.

Where do I spray my belt conditioner?

A simple and convenient solution, just spray on the belt of any belt-driven auto part, machine, or appliance to stop the squeaks and squeals and prevent premature wear.

What can you spray on serpentine belt?

Drive belts should never be sprayed with belt dressing, WD-40, or any lubricant. It is possible for motor oil and coolant to damage a serpentine belt. It is best to fix the leak of oil or coolant on the belt first if it is ongoing.

Why does my serpentine belt keep squeaking?

Your engine belts make a screech or squeal noise usually because the rubber belt is slipping on the metal pulley and just like your tires spinning on the road, this causes noise. The belt may be slipping due to improper tension or because it simply has gotten old and the surface has become glazed, cracked or brittle.

Can I use wd40 as belt dressing?

With this specially formulated spray from WD-40 Company, squealing belts are no problem at all. Just spray a little WD-40 Specialist Automotive Belt Dressing with the engine running. It penetrates into the cord fibres to restore flexibility and pliability.

How tight should a car belt be?

For most vehicles, the belt should not be able to be pressed down more than ½ inch. If it can be pressed lower, then the belt is too loose.