Do you need to brush Pebble Tec?

Brushing a Pebble Tec surface is also very important, especially during the first few weeks after application, but also afterwards, to keep dirt and algae from building up on the slightly irregular surface.

Do you need to brush New Pebble Tec?

The start-up process is not hard to perform but does require frequent water testing, brushing and chemical balancing. It is important to note that the start-up will have the most influence on the final appearance and longevity of your interior finish.

How often should I brush my Pebble Tec pool?

DO. brush your pool. It is recommended that you brush a PTI pool finish three times a day for the first three days and two times a day for the next ten days. Using a standard, nylon (very important) bristled pool brush.

How do you maintain a Pebble Tec?

Add muriatic acid to your Pebble Tec pool two or three times per week during the first 30 days after installation. This will also help keep the water balanced. Keep chlorine out of your Pebble Tec pool until all other pool chemicals are perfectly balanced.

How long does it take for Pebble Tec to harden?

Pebble Tec Explained

The very top layer of cement is then hosed away to expose the pebbles, and the pool is left to cure for about 24 hours. After that, the surface is acid rinsed and treated to bring out the pebbles' brightness.

How to: Brushing

Can you use a wire brush on a Pebble Tec pool?

Be sure to use only a nylon pool brush, never use a steel bristled pool brush on a Pebble Tec surface. Calcium scale can dull the finish of a pebble surface.

How long do Pebble Tec pools last?

How Long Will Pebble Tec Last? Traditional pool resurfacing materials require a high level of maintenance and will only last 5-10 years before it needs to be replaced. We generally would expect a Pebble Tec surface to last upwards of 20 years with proper maintenance.

Why is my Pebble Tec coming off?

It is normal for pebbles to come loose during the initial curing process. It is also normal to see some small loss of pebbles over time. Maintaining proper water chemistry is crucial to preserving the integrity of the finish.

Can you power wash a Pebble Tec pool?

As with any pool, a Pebble Tec pool needs to be drained before you clean it. Once drained, take the opportunity to survey it carefully for loose pebbles or cracked spots. You'll be pressure washing the Pebble Tec pool on very low pressure, so you'll need to use soap to loosen up the dirt before you start.

Can you shock a Pebble Tec pool?

Make sure you're keeping the alkalinity and calcium hardness in balance, and use a shock that's made of calcium hypochlorite. Liquid shock will work but it'll throw your pH to the moon, requiring the use of acid to lower it, which will tank your alkalinity, which will hurt the pebbletec.

How soon can you swim in a new pool with PebbleTec?

They usually do an Acid startup on Pebble finishes which takes about 7 days. Thats tough...they usually don't want you swimming in it for the first week. Also, don't know how large your pool is, but it could take 2 days or more to fill the pool up you know.

Can you leave a PebbleTec pool empty?

Does my pool need to be drained before cleaning pool tile or cleaning pebble-tec? No! - We lower your pool water just enough to expose all the pool tile calcium and pebble-tec calcium. In an effort to conserve water, We Never Need to Drain Your Pool.

How long do you have to brush new pool plaster?

Brush the pool twice a day for the first two weeks. This opens the pores of the plaster to allow proper curing as well as removes any loose plaster dust from the surface.

Does Pebble Sheen fade?

Pebble Tec's high quality color won't fade and does not stain easily. You have 4 great textures to choose from, each with their own unique & distinct colors (Pebble Tec, Pebble Sheen, Pebble Fina, and Bead Crete).

Can you change the color of Pebble Tec?

PebbleTec finishes, although more costly, can have over 20 color options. In addition, you can decide whether you have just pebbles in the finish or can now add in glass beads. The pebbles and beads are what change the color of your water.

Can you drain a Pebble Tec pool in the summer?

However, if the pool has a stone or Pebble Tec finish, it is pretty safe to drain a pool during the summer months, Good said.

Can you use pumice stone on Pebble Tec?

Yes you can. However we don't recommend using pumice stones. Cleaning with a pumice stone takes a lot of time and effort. Depending on the amount of calcium build up this could take hours and hours over several weekends.

How do you clean a pebble pool?

Can Pebble Tec be scratched?

Pebble Tec Pool Repairs

These are great for many reasons! They often hold up longer than traditional cement, and they are scratch- and thermal-resistant.

How much does it cost to acid wash a Pebble Tec pool?

Average pool acid wash cost is $202, cost ranges between $178 to $225 for a pool measuring 500 square feet, according to Improvenet.com in the US in 2020.

Is Pebble Tec rough on the feet?

like Pebble Sheen or Pebble Fina. Pebble Sheen is not very rough on the feet, whereas Pebble Tec might be. Pebble Sheen is an excellent product.

How much more expensive is Pebble Tec than plaster?

Thanks to its relatively simple look and material makeup, pool plaster is a lot less expensive than Pebble Tec®. White plaster costs about $4 for every square foot of pool surface. Meanwhile, a pebble finish, like Pebble Tec® or Pebble Sheen®, can easily cost $10 or more per square foot.

When can I fill my pool after Pebble Tec?

Like all cement based interior pool finishes, all of the Pebble Plus products are water cured. This means they must be filled with water as soon as possible after installation.

Does Pebble Tec have a lifetime warranty?

Pebble Tec also provides a lifetime warranty in Florida. Choices: Pebble Tec offers five distinct pool finishes: PebbleTec, PebbleSheen®, PebbleFina®, and PebbleBrilliance™ offer a wide variety of visually stunning, nature-inspired colors that blend beautifully into any outdoor environment.