Can you put thinset over concrete?

Whether you have cracks, chips or just a stained concrete slab, Thinset helps cover the old surface and create a new problem-free area. The thin mix is laid over the old concrete, slipping into cracks and crevices, hardening quickly into a smooth surface.
Takedown request   |   View complete answer on homeguides.sfgate.com


Can you lay tile directly on concrete?

You can install the tile directly on the concrete. You can install a CBU or cement board on the concrete, then the tile on top of that. Finally, you can use an uncoupling membrane between the tile and the concrete.
Takedown request   |   View complete answer on thespruce.com


Will thinset bond to sealed concrete?

Sealers prevent the tile adhesive from getting into the crevices of the concrete to create a tight bond between the tile and concrete. Removing the sealer lets the tile mastic or thinset stick better. You need to rent, borrow or buy a sand blaster to get rid of the concrete sealer.
Takedown request   |   View complete answer on homesteady.com


Should I seal concrete before laying tile?

Sealing a concrete floor before covering it with tile or carpet is a great idea. Sealing the concrete can prevent condensation and protect the floor. This means your carpet or tile stays dry and thus lowers the chances of mold and mildew building up.
Takedown request   |   View complete answer on uooz.com


Do you need to seal a concrete floor before laying tiles?

You should seal the floor with a suitable primer that is compatible with the adhesive you buy. i.e. buy Ardex primer for Ardex adhesive, BAL primer for BAL adhesives... Effectively it stops the draw (the sponge effect of the dry concrete) and creates a better adhesive bond.
Takedown request   |   View complete answer on community.screwfix.com


Thinset on Concrete



Is mortar the same as thinset?

Thinset, while it is also sometimes referred to as a “mortar” is an adhesive. It's a mix of cement, water, and fine sand. It holds your tile to the substrate and is used in commercial applications, “wet wall” applications (such as a shower floor), or with heavier tiling materials such as Ankara Travertine Stone Tile.
Takedown request   |   View complete answer on arizonatile.com


How thick can thinset be under tile?

Plan for a layer of thinset 3/16-inch to 1/8-inch thick beneath your tile. A 3/16-inch layer of thinset will be enough for tiles with a smooth back to bond the tile to the floor or backer board. For natural tiles with an uneven surface on the back, you may need to spread a 1/8-inch layer of thinset during installation.
Takedown request   |   View complete answer on peppershomeandgarden.com


What kind of thinset do you use for concrete floors?

Modified thinset is the product of choice for most tile installations because of its increased strength and bonding with minimal shrinkage, which means a reduced chance of cracks forming in the tile.
Takedown request   |   View complete answer on warmlyyours.com


How do you lay tile on uneven concrete?

Lay a flat board over the tiles, paying attention to the uneven spots, and beat the board with a rubber mallet. This will drive the tiles deeper into the mortar; if more pressure is placed on low spots than on high ones, it can even out the finished surface of the tile installation.
Takedown request   |   View complete answer on homeguides.sfgate.com


How do you lay ceramic tile on a concrete floor?

Step-by-step Guide on Tile Installation
  1. Step #1: Preparation 0f Concrete Sub-Floor. ...
  2. Step #2: Leveling the Sub-Floor. ...
  3. Step #3: Placing the Anti-Fracture Underlay Membrane. ...
  4. Step #4: Establishing the Layout of Your Tile Floor. ...
  5. Step #6: Grouting Ceramic Tiles.
Takedown request   |   View complete answer on allamericanflooring.net


Is back buttering tile necessary?

Although not necessary for tile coverage, back buttering can be effective by increasing the bond of the mortar to the back of the tile which is an excellent benefit.
Takedown request   |   View complete answer on ceramictilefoundation.org


Can you put thinset on to thick?

Thinset mortar is not designed to be applied thickly as it will create uneven results. This includes the surface becoming uneven and developing cracks over time. You need to stabilize the finishing and that only happens when the surface is even using thinset mortar.
Takedown request   |   View complete answer on dropbymyhouse.com


What is the difference between thinset and mud set?

A variety of high performance thinsets gives you strength, flexibility and chemical resistance to meet the requirements of most any environment. The surface you cover is the key to success in thinset. A mud set mortar installation gives you room for error in the substrate.
Takedown request   |   View complete answer on stoneimportsolutions.com


Can I use thinset to level a floor?

You can use thinset to install tile over an uneven cement floor and leave the floor perfectly level. You can also use thinset mortar to level out an uneven cement floor or fill small holes in the floor without installing tile.
Takedown request   |   View complete answer on hunker.com


What is thinset concrete?

Thinset or mortar (or thinset mortar, thinset cement, dryset mortar, or drybond mortar) is an adhesive made of cement, fine sand, and a water retaining agent such as an alkyl derivative of cellulose. Many thin-sets have latex and polymer additives in them designed to increase bonding strength.
Takedown request   |   View complete answer on tileoutlets.com


Is tile adhesive better than thinset?

If installing a small area of ceramic floor or wall tiles, mastic is the better choice. The adhesive is premixed, does not require water and will hold the tiles in place with no beating or additives. If installing a large amount of tiles, stone tiles or glass tiles, thinset mortar should be used.
Takedown request   |   View complete answer on hunker.com


Can you put tile over concrete outside?

Clean the concrete slab thoroughly before laying tile. Apply a waterproofing membrane, such as RedGard, to the slab before tiling. Use a polymer-modified, dry-set mortar adhesive that's rated for outdoor use. Cover the slab completely with the tile adhesive, and apply it to the back of the tiles as well.
Takedown request   |   View complete answer on todayshomeowner.com


How do you tile a concrete basement floor?

To add tile to your basement, you'll need to follow several steps.
  1. Check for damages to your basement floor. ...
  2. Clean your basement floors. ...
  3. Prepare your tile for installation. ...
  4. Apply the thin-set mortar. ...
  5. Lay down the tile. ...
  6. Apply the grout and allow to dry.
Takedown request   |   View complete answer on thegroutmedic.com


What do you seal a concrete floor with?

Acrylic sealer sits on top of the concrete instead of seeping in, which makes it ideal for sealing interior floors. Epoxy sealer – More durable than acrylic, this type of sealant protects against grease and oil, and is perfect for a basement, garage or outdoor shed.
Takedown request   |   View complete answer on rainbowintl.com


How long does concrete have to cure before tiling?

Many people suggest a minimum cure of 28 days under normal conditions, although most thinset manufacturers say you may get away with 14 days using a premium latex modified thinset. There are risks though to tiling too soon.
Takedown request   |   View complete answer on tcnatile.com
Previous question
How do I promote my YouTube channel?