Can you put fascia over existing wood?

While it is certainly feasible to install vinyl fascia and soffit over wood, you need to ensure that you are keeping in line with the local building codes. Make sure that your attic has enough ventilation before affixing your vinyl soffit over the plywood.

How do you cover wood soffits?

If the existing wood is in good shape, then it is safe to cover it with aluminum or vinyl material. The original soffits might have vents cut into the surface to provide fresh air to the attic. These form an integral part of ventilation of the attic.

How do you install soffits on an old house?

What's the difference between soffit and fascia?

The soffit helps regulate your home's temperature, allowing your roof to “breathe.” Cool, dry air is drawn into the soffit vent, and hot moist air is forced out of roof exhaust vents. The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished.

Can you install vinyl soffit over wood soffit?

While it is certainly feasible to install vinyl fascia and soffit over wood, you need to ensure that you are keeping in line with the local building codes. Make sure that your attic has enough ventilation before affixing your vinyl soffit over the plywood.

How to Replace Fascia and Soffit without removing DRIP EDGE!

What kind of wood do you use for soffit and fascia?

Common Fascia and Soffit Materials

Fiber-cement fascia board with wood grain. Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.

Is vinyl fascia any good?

Vinyl is widely used for siding and fencing because it is durable and low-maintenance. The same is true when using it for fascia and soffit as well. It is fade-resistant and not susceptible to insect damage or rot. There is no need to paint vinyl; maintenance usually involves spraying it clean with a hose.

Which is better vinyl or aluminum fascia?

Aluminum Soffits for Long Term Value

It is very easy to clean and maintain. You can buy it painted and vented for optimum air flow. Aside from cost, the main disadvantage of aluminum is its ability to dent under force. Also, it is not a good insulator like vinyl.

How do you replace wood fascia in a house?

What is the best material to use for fascia board?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

Is there wood under soffit?

The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”. The soffit is basically, any finishing material, such as wood or fiber cement, that is installed to cover the underside of your roof overhang.

Can I replace wood soffit with vinyl?

While there are short-term costs to replacing wood soffits with vinyl, in the long-term, you'll see reduced upkeep and repair expenses. While painted wood peels over time, the color on vinyl soffit is embedded in the material, so you will not need to repaint the soffit.

What goes on first fascia or soffit?

The job goes smoother when you follow the correct installation sequence. First nail up the J-channel, then soffit panels, then fascia, then drip edge.

Should I use vented or solid soffit?

Non-vented or continuous soffit works best when your roof has narrow eaves or if you need to ventilate a large amount of attic space. Vented soffit panels are good with a wider eave and a smaller amount of attic space because they have smaller vents between solid panels.

What is behind the fascia board?

The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area.

How do you replace rotted wood soffits?

What do you call the wood under the roof?

Decking. Also known as the wood sheathing, this is the base on which everything else is laid on. It's essentially the foundation of the roof. This is typically made with OSB or oriented strand board or plywood that's attached with nails onto the rafters.