Can I use ballast instead of hardcore?

Ballast is available in different types for different needs. 0-20mm ballast is perfect for sub-base
sub-base
In highway engineering, subbase is the layer of aggregate material laid on the subgrade, on which the base course layer is located. It may be omitted when there will be only foot traffic on the pavement, but it is necessary for surfaces used by vehicles.
https://en.wikipedia.org › wiki › Subbase_(pavement)
and concrete foundations. 20mm screened ballast is versatile and can be used on driveways, footpaths, oversite fill as well as sub-bases. Raised ballast is reserved for backfill, driveways and binding hardcore.
Takedown request   |   View complete answer on jtdbuildingsupplies.co.uk


What is difference between hardcore and ballast?

hard core is used as a loose infill and is the compacted base layer to most paved or concreted groundworks. ballast is the name given to sand and aggregate that has been mixed together and is the main ingredient in concrete.
Takedown request   |   View complete answer on forums.overclockers.co.uk


Is aggregate the same as ballast?

What is ballast aggregate? The general rule of thumb when making concrete is to use 4 parts aggregate, 2 parts sharp sand and 1 part cement and water. The bit that is aggregate and sharp sand is collectively known as 'ballast' and is typically sold in ready-mixed bags.
Takedown request   |   View complete answer on farwells.co.uk


Can I use ballast as a shed base?

Concrete mix for shed base

A standard concrete mix ratio of 1 part cement to 5 parts ballast (aggregate and sand) is usually perfectly adequate for shed bases but you can add reinforcing fibres if you are housing anything particularly heavy. if you are unsure ask for advice from your ready-mixed concrete supplier.
Takedown request   |   View complete answer on hanson.co.uk


Can you lay slabs on ballast?

This can be done be using a Ballast and Cement mix (6 parts Ballast to 1 part Cement with just enough water to form a semi dry mix) or Type 1 compacted with a 'wacker plate' which can be hired from your local plant hire company.
Takedown request   |   View complete answer on lawsons.co.uk


Laying hardcore



Can you use ballast as a subbase?

Can I use ballast as a sub base? Ballast is available in different types for different needs. 0-20mm ballast is perfect for sub-base and concrete foundations. 20mm screened ballast is versatile and can be used on driveways, footpaths, oversite fill as well as sub-bases.
Takedown request   |   View complete answer on jtdbuildingsupplies.co.uk


What can I use ballast for?

Ballast is a mixture of sharp sand and small stones or gravel, used to make concrete for a variety of landscaping uses – from path edgings and shed bases to kerbs and securing fence posts.
Takedown request   |   View complete answer on awbsltd.com


What is the cheapest way to build a shed base?

Hi, The best way would be a concrete slab base and the cheapest way if the ground your putting the shed onto is reasonably level would be to lay pressure treated bearers across the joists of the shed base.
Takedown request   |   View complete answer on mybuilder.com


Can you use ballast for concrete?

Mixing 1 part cement to 6 parts ballast creates concrete suitable for driveways, paths and patios, and increasing the ratio to 1:8 gives foundation-strength concrete. It is of course possible to add other materials to increase the strength of the concrete – these often include steel reinforcing bars (“rebar”).
Takedown request   |   View complete answer on allmix.co.uk


How much ballast do I need for base?

To work out how much ballast you need, multiply the length in metres by the width in metres by the height in metres. The result will be the amount in cubic metres that you need to buy.
Takedown request   |   View complete answer on community.screwfix.com


Can you use aggregate as sub base?

A sub base is an aggregate or aggregate mix that forms a sound, load-bearing base layer for applications such as the construction of roads, paths and pavements. A sub base aggregate can also be used as a base for patios and artificial grass.
Takedown request   |   View complete answer on avonmaterialsupplies.co.uk


Can I use gravel as sub base?

This unstable structure means all gravels are not suitable for patio sub bases. The typical reason for wanting to use gravel for a patio base is recycling existing materials. It is much more expensive to skip used gravel and buy in fresh sub base.
Takedown request   |   View complete answer on buckinghamshirelandscapegardeners.com


What is 20mm ballast used for?

Widely used in construction and domestic applications, this 20mm ballast is ideal for making general purpose concrete for the use in paths, over sites, shed bases, wall footings, securing fence posts, path edgings and kerbs and general hard landscaping uses.
Takedown request   |   View complete answer on awbsltd.com


Can I use gravel instead of hardcore?

Gravel can be used to make up a hardcore level. For more information see: Hardcore. Aggregate is a material used in construction as a means of stabilising and reinforcement, included, for example as a component of concrete and cement.
Takedown request   |   View complete answer on designingbuildings.co.uk


What is the difference between ballast and MOT Type 1?

MOT 1 is always prefered,as it will compact better due to the wider range aggergrate from 40mm stones down to dust, & is usually cheaper than ballast, sub base should be ideally 100mm & well compacted. And patio slabs should be laid on a full mortar bed, not spot bedded.
Takedown request   |   View complete answer on community.screwfix.com


What size ballast is best for concrete?

The usual range employed is between 9.5mm and 37.5mm in diameter. - Fine aggregates are usually sand or crushed stone that are less than 9.55mm in diameter. Typically the most common size of aggregate used in construction is 20mm. A larger size, 40mm, is more common in mass concrete.
Takedown request   |   View complete answer on greenspec.co.uk


Why is ballast used with concrete?

Ballast, when added to cement, binds the aggregate particles together making it strong and sturdy for making the foundations or base layers for garden walls or sheds as well as for creating path edgings and kerb ledges.
Takedown request   |   View complete answer on buildbase.co.uk


What is the strongest mix of sand and cement?

Strong Mortar 1:4 mix

Mix one part cement to 4 parts soft sand. Again, add a small amount of lime or plasticizer to increase the workability.
Takedown request   |   View complete answer on diy-extra.co.uk


What is the strongest mix of concrete?

C40 concrete is the strongest and most durable mix and for good reason townhomes for sale san diego. It can handle almost any abuse, including withstanding corrosion, making it ideal for farm-based and laboratory environments.
Takedown request   |   View complete answer on concreteflooringsolutions.co.uk


What's the best base for a shed?

A gravel pad (crushed stone) with a lumber perimeter is the best shed foundation option in most cases. We recommend gravel shed foundations because they provide a stable base for your shed to rest on and do a great job of draining water away from the bottom of your shed.
Takedown request   |   View complete answer on siteprep.com


Do I need a sub base for my shed?

Both paved and concrete bases can't be laid straight onto soft ground and so require a sub-base.
Takedown request   |   View complete answer on diy.com


Do shed base need to be perfectly level?

Do shed bases need to be perfectly level? Yes – without a level base, your shed won't last long (see below). So while the ground beneath the base can be sloped, the base itself must be perfectly level.
Takedown request   |   View complete answer on tigersheds.com


How much concrete will a ton of ballast make?

A bag of 25kg cement yields volume about 0.0174 cubic metres, which is approximately equal as 0.6130 cubic feet and a bulk, 1 tonne or jumbo bag of ballast yields volume about 0.5 cubic metres, which is approximately equal as 18 cubic feet.
Takedown request   |   View complete answer on civilsir.com


What is ballast gravel?

BALLAST WASHED GRAVEL is the gravel ingredient of concrete and has historically been used to form a bed for a road or railroad. It is often used as drainage gravel. Ballast Washed Gravel is 2-1/2″ thick and sold in 3000 lb. super bags only at $140.00/yard. (
Takedown request   |   View complete answer on bourgetbros.com


Can I use ballast for fence posts?

All standard building aggregates such as ballast, building sand and cement are available, along with bags of ready mix post mix that are ideal for setting in fence posts and decking posts.
Takedown request   |   View complete answer on tate-fencing.co.uk