Can I use baby oil on my bike chain?

Be sure to use bicycle lubricant, not WD40 or another solvent. Putting anything other than bike lube on your components can cause them to corrode faster. I've had customers tell me they've used motor oil, baby oil, coconut oil, vegetable oil, etc.

Can I use oil on my bike chain?

Technically, you can use any lubricant for your bicycle chain, however, some lubes work significantly better than others. Also, keep in mind that most lubricants are designed to be used in a closed system, not for use in a bicycle drivetrain that's exposed to all the environmental elements and dirt & debris.

What can I use as a lubricant for my bike chain?

Chainsaw oil, Silicone Spray, Clipper Oil, and 3-in-1 Oil are the recommended lube alternatives that you can use for your bike chain. You must avoid oils that are overly thick. Petroleum jelly, cooking oil, olive oil, and coconut oil should also be avoided as a lubricant alternative.

Can you use olive oil on a bike chain?

Can I use olive oil on my bicycle chain? You can use olive oil on your bicycle chain because having oil in some amounts is better than having no oil at all. However, this can be effective only for a short time. If you are thinking big, using olive oil on your bike's chain isn't effective.

Is coconut oil good for bike chain?

Apart from the wastage of oil while applying( as coconut oil would easily drip down from the chain), the oil would easily evaporate due to frictional heat (I assume it wouldn't last for more than one ride). While coconut oil would be better than no lubricant, it would damage the chain and spoke if used too often.

use MOTOR OIL on your bike chain

Can I use WD-40 on my bicycle chain?

WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free. It also minimizes the accumulation of dirt which reduces the wear and tear of the chain.

Can I use petroleum jelly on my bike chain?

Motor oil is another alternative to getting an actual bike chain lubricant. The fact of the matter is that it will wear away the components it is used on, owing to its acidity and particulate matter. Similarly, petroleum jelly might appear to be a good product for bike chain lubrication on paper.

How often should I oil bike chain?

So, how often should you lube your bike chain? If you are a regular bike commuter you should lube your bike chain at least every month or every 150-200 miles (240-320 kms). Depending on the conditions you ride your bike in and the type of chain lube you use, this period can vary from a few days to a month.

Can I use vegetable oil to lubricate metal?

Vegetable oil should NEVER be used to lubricate mechanical parts. It always leaves a solid deposit which later will be stuck to the parts you wanted to lubricate.

How do I know if my chain needs lube?

Over-lubing can also be detrimental, as excess lube attracts dirt, forming a gritty paste which grinds down chain components and other drivetrain bits. Appearance, time, or distance are not as reliable as sound (grinding, creaking, squeaking, squealing) as an indicator for when a chain needs to be lubed.

Should I clean my bike chain after every ride?

A clean chain is as critical as a properly lubricated one. Ideally, chains should be thoroughly cleaned after each and every ride. Unfortunately not many of us have the time to do this, but even a quick wipe with an clean rag can make a huge difference.

Should you wash your bike after every ride?

You should be cleaning your bike after every few rides and definitely after any ride when you get caught in the rain. The good news is that with modern bikes and modern tools it's a total breeze.

Can I use silicone spray on my bike chain?

Re: Silicon spray

Silicon spary will work as a chain lube. So will motor oil, WD 40 and probably yak milk. You're still better off using a specific bike chain lube. I use silicon spray on my frame to keep it all purdy like, as well as the stanchions on my suspension forks.

Can you use 3in1 oil on bike chains?

I don't recommend using either motor oil or 3in1 oil to lubricate the chain. Motor oil is too heavy and won't fully penetrate the rollers, and 3in1 oil is vegetable based and will gum up the chain.

Can you use oil as chain lube?

Engine oil cannot be used as chain lube and for many reasons. It might do the job temporarily but it will cause problems later on. Number one being the viscosity of engine oils. The thickness of the oil will draw more dirt on the chains.

What can I use if I don't have grease?

In baked goods, oil binds and softens ingredients and enhances flavor. Approximately the same amount of applesauce, mashed banana, or pureed prune can do the same work with great result. For savory recipes, you can use mashed tofu to replace the oil. You don't need to use oil to prepare baking pans either.

Is Vaseline a good lubricant for metal?

Vaseline: you can use vaseline for all sorts of applications. It is a great lubricant for metal parts such as the air installation, but it is also regularly used for installing PVC parts.

Should you oil a new bike chain?

Do I need to degrease and re-lube a new chain? The advice from most of the major chain manufacturers is that the lubrication chains come with is ideal for riding and doesn't need to be removed. Simply fit, ride and re-lube when necessary.

Is it OK to hose down a bicycle?

So, can you use a hose on your bike? YES! It is true that if you leave water sitting on your bike for a long time, leave soap or degreaser on your bike, or do not properly dry off your bike before storing it, you could have some rust and wear issues on your hands.

Is it OK to wash your bike with water?

Water: When used carefully, water can be a handy tool, but be careful here. Water, especially when coming from a high-pressure hose, can cause damage to sensitive bearing systems throughout your bike. Soap / general cleaner: Use diluted dishwashing soap or preformulated bike wash cleaner for frame cleaning.

Can I wash my bike with shampoo?

You can wash your bike with shampoo, nothing wrong in that. But shampoos are not as powerful as the soap oil used at workshops. Even then it will do the job just as good.

Can I use dish soap to clean bike chain?

You can use hot water with dish soap, a solvent or a degreaser. Step 2 Place the removed bicycle chain into the pan or plastic tub. Soak the chain for one to two minutes. Step 3 Remove the chain from the cleaning solution.