Can I use 10w40 instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

What happens if you put 10W-40 instead of 5W 40?

Can I Use 10w40 Instead Of 5w40? The synthetic engine will be fine as long as it is fully synthetic. 5W – 40 is better for colder conditions, 10W is thicker to start, so it does not get to places around the engine as quickly as 5W-40, but it all depends on the temperature.

Can I use 5W-30 oil instead of 10W-40?

5w30, as well as 10w40, are both suitable depending on the layout of your engine and the heat in your area. It is also significant to mention that engine oils contain a variety of admixtures. 5w30 oil is especially well suited to vehicles operating in cold climates.

What is the difference between 10W-40 and 5W 40 engine oil?

5W40 vs 10W40 – Differences

The main difference between the two oil types is that one is thinner than the other. The 5W40 is thinner than the 10W40 at lower temperatures. But when the temperature is higher, both motor oils similarly perform their intended functions (using the same viscosity).

Will thicker oil damage my engine?

Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.

Thicker Oil For Older Engines? Myth Busted!

Is 10W40 thicker than 5w30?

At high temperatures, the 5w30 oil is thinner than that of 10w40 since 30 is lower than 40. These numbers, however, do not depict the actual viscosities of the oils at extreme temperatures.

Is 10W40 good for winter?

Is 10W40 good for winter? Generally, the answer to this is yes, since it is a low-temperature oil grade.

Is 10W-40 thicker than 5W-40?

10W-40 is a bit thicker than 5W-40 but is still rather thin and works well to lubricate the moving parts of an engine during start-up. This oil's number "40" means it will be a little thicker than average while exposed to the heat of a running engine.

What uses 10W40 oil?

This oil weight is commonly used in diesel engines or in a smaller motorcycle engine too. The 10W-40 oil viscosity also often serves as an alternative for older engines with burning or oil leaking issues. Why is that? The 10W-40 engine oil has a thicker viscosity than, say, 10W-30 oil when the car engine is hot.

Is 10W-40 OK for my car?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Can you mix 10W-40 and 5W 40 oil?

Can You Mix 10w40 And 5w40 Oil? A registered user. It is not a problem mixing different weights as long as both oils are classified as C-class.

Is 10W40 fully synthetic?

Semi-synthetic oils such as 10W40 have long been the standard. Their base is refined crude oil, which is then blended with additives. However the market is moving towards synthetic oils.

What does 10W-40 mean in oil?

The designation "10W-40" indicates a multigrade oil that is toward the low end of the SAE scale in cold weather, but at the upper end in hot conditions. 10W-40 oil is therefore good for a wide range of weather conditions.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well.

Can I use 10W 30 instead of 5w30?

According to API motor oil guide [1], If you are using 10W–30, you can safely switch to 5W–30 (in car engines). 5W–30 is thinner than 10W–30 when cold. (you must follow the manufacturer's recommendations). However, switching from 5W–30 to economical 10W–30 is not always recommended.

Is 10W-40 oil good?

10W-40 motor oil's greater tolerance for hotter temperatures means that it's better at resisting thermal breakdown and reducing deposit formation. So, if you drive in a warm climate — especially more than 32°C (90°F) — or have an engine that runs hotter than others, 10W-40 oil viscosity is a good option.

Is 5W or 10W better for winter?

When it comes to 5W-20 or 5W-30 vs 10W-30, the opposite is true: the 5W oils will flow a little better in the cold than a 10W oil for maximum cold-weather protection and easier cold starts.

Can you mix 10W-40 and 10W 30?

Mixing 10W30 with 10W40 Some people say mixing them is fine as long as you don't live in freezing weather. The motor oils in these blends are not harmful to your vehicle, even if they are mixed with synthetic oils.

Are all 10W40 oils the same?

The SAE grade (in this case 10W-40) only specifies the viscosity of the oil - it doesn't say anything specifically about the composition of the oil or any additives it may have.

Is 10W40 oil for petrol or diesel?

10w/40 SL/CH4 is suitable for normally aspirated and turbocharged, highly stressed diesel engines and petrol engines in passenger cars and light commercials particularly modern vehicles. It is miscible with all synthetic and mineral based engine oils.

Is 10w40 good for petrol engine?

it has high protective properties for the engine, and although the brand says this 10w40 oil can be used on diesel and petrol cars, you should be using this one on petrol cars especially because of its protective additives.

Can I use 10W-40 instead of 5W20?

A registered user. The Ranger said that you can mix 10W & 30W to get 20W, or you can mix 5W20 & 10W40, but you don't want to mix 10W & 30W. The answer is yes, but not straight weights or multigrades.

Is Shell Advance 10w40?

100% synthetic 10w40 engine oil. Makes gear shifting smooth, reduce vibrations.

What happens if you mix 2 different engine oils?

Can oils of different grades be mixed? The good news is that mixing different types of oil it will not harm your engine in any way in the short run. Most synthetic and semi-synthetic engine oils are based on regular oil and are compatible.

What happens when you mix oil of different viscosity?

Different oil viscosities will not separate or react negatively to each other because the base oil is molecularly the same. It's the different oil additive systems between brands that shouldn't be mixed - if you're concerned about the oil performing exactly how it was designed.