Why does my log burner burn logs so quickly?

The main reasons why a fire would continue to burn so fast in your fireplace can be that: The wood is too dry; Softwood logs are being burnt, or; There is too much air supply to the fire.
Takedown request   |   View complete answer on fireplaceuniverse.com


How long should a log last on a wood burner?

Generally, tests show that heat logs will burn for around 2 - 3 hours. Now, that's not a very specific answer to the question 'How long do fire logs last? ' but there are so many factors that will affect burn time, as well as the composition of the log.
Takedown request   |   View complete answer on lektowoodfuels.co.uk


How do you make wood stove logs last longer?

How To Keep a Wood Stove Burning All Night
  1. Rake the charcoal towards the front of the wood stove. If you want to learn how to keep a wood stove burning all night, you'll need to learn about coal placement. ...
  2. Place five to seven large logs in a tight formation behind the coals. ...
  3. Shut the door and enjoy.
Takedown request   |   View complete answer on mffire.com


Why is my log burner drawing too much?

Ensure that the ash pan and ash pan door are closed and sealed properly. Additional air can be drawn into the fire from this area causing the fire to burn much more quickly than would be desired. Check your fuel. Soft wood will burn faster than hard wood.
Takedown request   |   View complete answer on kernowfires.co.uk


How do I keep my log burner going all day?

Overall, there are a few things you can do to have the best chance to keep a fire going, including:
  1. Taking the time to build a fire up.
  2. Using plenty of kindling.
  3. Using dry seasoned wood.
  4. Keeping your stove and chimney clean.
  5. Checking for any draft issues with your chimney.
  6. Making sure you have enough ventilation.
Takedown request   |   View complete answer on directstoves.com


These WOODSTOVE MISTAKES Are Costing You Time



What vents should be open on a wood burner?

Most wood burning stoves and multi-fuel stoves have a bottom air vent and a top air vent. Wood burns best with a good bed of ash laid down in the bottom of the stove and an air supply from the top. When lighting your stove, open both air vents fully.
Takedown request   |   View complete answer on southyorkshirefirewood.com


When I close the door on my wood stove the fire goes out?

Why does the fire go out or smolder when I close the door or the bypass damper? This can occur due to several factors: The fire was not burning hot enough to produce the draft needed to pull the air into the fireplace. Feed more dry wood kindling before closing down the stove.
Takedown request   |   View complete answer on vermontcastings.com


How do you slow down a log burner?

If you are finding that your fire is burning fast and is therefore extinguishing quickly, you need to restrict the air into the chamber. Simply start closing the vents off once you add your logs (without completely shutting them down) and your fire will burn slower which means it will last longer.
Takedown request   |   View complete answer on logsnearme.co.uk


How do you slow down a fire in a fireplace?

There should not be anything blocking airflow inside and around the fireplace chimney space. Remove items such as furniture from around it, if necessary; ensure adequate spacing between walls/windows/furniture so that hot air does not get trapped and suffocate the fire.
Takedown request   |   View complete answer on fireplacetown.com


Should I close the damper on my wood stove?

You don't want to leave your wood stove damper fully open, though, because then the heated air will continue to escape, and your room won't get warm. By closing the damper, it will reduce the oxygen levels in the chimney, and you'll have a longer fire. According to Northeastern Chimney, this also creates a downdraft.
Takedown request   |   View complete answer on hunker.com


Can you put too much wood in a wood stove?

The stove's manual states that wood can be stacked up inside the stove, but no higher than these tertiary air vents. If we were to overload this stove with too many logs then it may cause the stove to over fire, as well as preventing the secondary burn of gases from occurring if the tertiary air vents are blocked.
Takedown request   |   View complete answer on fireplaceuniverse.com


What wood stove has the longest burn time?

Typically catalytic or hybrid wood stoves produce the longest burn times.
Takedown request   |   View complete answer on regency-fire.com


How do you burn logs efficiently?

How to improve your wood stove's efficiency
  1. Get the chimney right. The chimney is a vital part of the overall wood burning stove. ...
  2. Keep the chimney clean. ...
  3. Think about positioning. ...
  4. Use dry wood. ...
  5. Use the 'top down' lighting method. ...
  6. Wait, don't just throw on logs. ...
  7. Make sure it's cold outside, or warmer inside.
Takedown request   |   View complete answer on stovesellers.com


How many logs should you put in a log burner?

It is good to have more than one or two logs in a wood burner for a constant heat, but overloading it will have the opposite effect and the fire will not have enough air for clean combustion.
Takedown request   |   View complete answer on stovax.com


What is the best fuel for a log burner?

You can't get a decent wood burner fire going without kindling. Hardwood is a more efficient fuel source, but it's often difficult to ignite. This is why it's best to use softwood to get any fire stared.
Takedown request   |   View complete answer on sweepsmart.co.uk


How do you put out a 4 hour log?

As you would with any fire, simply douse them carefully with water. Another option is to use sand, making sure the flames are completely covered. Finally, you can use a dry chemical fire extinguisher to put out a Duraflame log.
Takedown request   |   View complete answer on hunker.com


Why is my wood stove burning so hot?

Too Much Wood Is On The Fire

Just as too much airflow to a fire can cause a wood stove to burn too hot, having too much wood on the fire at any one time can be another reason why your wood burning stove is burning so hot.
Takedown request   |   View complete answer on fireplaceuniverse.com


Can I leave the flue open overnight?

The smoke from burning wood contains carbon monoxide, so in order to prevent this toxic byproduct from entering your home, it is important to leave the flue open overnight. This enables a draft to carry the compound out into the atmosphere, instead of sinking down the chimney and saturating the room.
Takedown request   |   View complete answer on mymove.com


What should my flue temp be?

A good rule of thumb is to get the temperature up to a stovepipe thermometer reading of 450 degrees F. for the first half-hour, and to keep it at an average of 300 degrees thereafter, each day that you start your stove.
Takedown request   |   View complete answer on crfd.org


How do you calm a fire down?

Spread out the logs and embers to help cool the fire quickly. Cover the logs and embers with ashes from the bottom of the fireplace. Cover the logs and embers with sand or baking soda to ensure any smoldering embers are completely extinguished.
Takedown request   |   View complete answer on family.lovetoknow.com


Is a log burner hotter with door open?

And in most stoves it's better to close the door as soon as possible. The reason is quite simple. With the door closed, your stove is up to 60% more efficient than if you have the door open. That means more heat in the room and less expense for you.
Takedown request   |   View complete answer on blog.gr8fires.co.uk


Can you get carbon monoxide poisoning from a wood burning stove?

The simple answer is yes, you can get carbon monoxide from a wood-burning stove. However, carbon monoxide poisoning is also possible with additional fuels such as gas, oil, solid minerals and biomass. Not just wood-burning and multifuel stoves.
Takedown request   |   View complete answer on bowlandstoves.co.uk


Should you leave a log burner door open?

The simple answer to this question is yes, the stove will work, but it can be up to 60% less efficient than when the door is closed. The fact is that wood-burning stoves and multifuel stoves are designed for use with the door closed.
Takedown request   |   View complete answer on bowlandstoves.co.uk


Why does my log burner glass go black?

Burn the Right Fuels

Probably the most common cause for glass to go black is using unseasoned wood on your log woodburner. It's recommended to use wood that has been cut, chopped and out in the air for at least a year. The reason for this is that there is less moisture in the wood.
Takedown request   |   View complete answer on meandmyglass.co.uk


When should I close my fireplace vents?

You should close the damper on your fireplace once the fire and embers have all burned out. This prevents warm air in your house from escaping out the chimney. You should open the damper before lighting a fire and close it once the fire is done burning.
Takedown request   |   View complete answer on fireplacetips.com