What is a POM plate?

POM Plates are a natural (white) colour. Custom made plates laser cut from Polyoxymethylene (POM). POM is a high strength, yet flexible plastic - It is a great choice of material for a keyboard plate as it provides a less firm typing experience and modified acoustics.

What plate is the best for keyboard?

Aluminum backplates are stronger and more rigid than polycarbonate plates. That said, they aren't as rigid as brass backplates and can bend if moderate pressure is put on the plate. Another advantage of aluminum backplates is their light weight.

What is POM and FR4?

Sound is somewhat dependent on switch material, switch type, keycap type, and case. IME, POM has a plop-y sound (not necessarily bad; I like the sound), FR4 can sound fairly deep/thocky, Alu "clacky" but can be thocky, and Brass tends to be more higher pitched. I do like the sound of tactiles on brass though.

Which is better polycarbonate or brass?

Polycarbonate plates tend to produce a deeper sound when used compared to brass's higher frequency. The tone that brass makes has been affectionately referred to as "musical" due to its pleasant and higher-pitched qualities. Like the qualities mentioned above, this boils down to personal preference.

What plate is best for linear switches?

Alu vs Brass vs FR4 vs POM vs Polycarbonate Plate (Linear)

What are the smoothest switches?

Linear switches are a sub-set type of switch that focus on producing a smooth, consistent actuation without any tactile feedback. Linear switches are great for people who don't like the small bump experienced from tactile switches or the loud noises from clicky switches.

How strong is polycarbonate?

Polycarbonate typically has a tensile strength of between 55–75 MPa (force per unit area). With regards to tensile strength, another plastic alternative such as acrylic is roughly 4-8x stronger than glass, whereas polycarbonate is up to 200x stronger.

What plate is best for tactile switches?

You will find that tactile/clicky switches will sound more full and solid with a brass plate, maintaining some metallic qualities and feel.

Which is better polycarbonate or aluminum?

Aluminum is a more expensive option, but it is known to be the most durable material. It will not corrode or fade in harsh weather conditions. Polycarbonate is much more affordable, but it is less durable and cannot withstand the same harsh weather conditions as aluminum.

What are FR4 plates good for?

FR4 is a great way to inexpensively build a board. Usually considered a sandwich or spaced plate style case (just 2 FR4 plates, spaced apart with standoffs/spacers, pcb held in place by the switches in the switch plate).

What does a FR4 plate do?

FR4 is a high-density fiber material that feels given between an aluminum plate and PC. It is solid with a certain flexibility and also solid with hardness, which enables you to get a balanced typing experience.

What is the best material for a keyboard?

PC is like ABS but has a better toughness, which makes the plastic more impact resistant. A lot of keyboard cases nowadays are a blend of PC & ABS plastic, which make a more reliable material when combined.

Does a keyboard need a plate?

However, in modern boards, having a plate is very common. It is possible to choose to build a keyboard without a plate, but the stability of the switches is determined by the soldering quality.

What is Ducky keyboard?

Ducky manufactures gaming peripherals with its primary focus on mechanical keyboards. Their keyboards are highly customizable, and you can purchase them in a variety of Cherry MX, Gateron, TTC, and Kailh switches, depending on what model you're interested in.

Is a POM plate good?

POM is a high strength, yet flexible plastic - It is a great choice of material for a keyboard plate as it provides a less firm typing experience and modified acoustics.

How do you lubricate a switch?

What are the disadvantages of polycarbonate?

The main disadvantage of polycarbonate is that it isn't resistant to scratches. For example, if a branch should happen to fall on a patio canopy made of polycarbonate, it may be scratched. This problem can be solved by polishing the polycarbonate.

How do you cut polycarbonate sheets?

Use a circular saw or a jigsaw for the best cut. Polycarbonate sheets can be cut with either a circular saw or a jigsaw. A circular saw is the best tool for cutting larger polycarbonate lengths. Thanks to the properties of this material, polycarbonate won't crack or splinter around the cut.

Does polycarbonate break easily?

Another feature of polycarbonate is that it is very pliable. It can typically be formed at room temperature without cracking or breaking, similar to aluminum sheet metal.

What are Creamsicle switches?

An improvement on the stock Tangerine which is already an exceptionally smooth switch, the Creamsicles are in the upper echelon of linear switches in the market. The combination of two of the smoothest materials in the switch game results in a very pleasing typing feel with no audible nor tangible scratchiness.

What does it mean to film a switch?

Switch films are small pieces of plastic or other material such as rubber that go in between the top and bottom housing of a mechanical keyboard switch to reduce switch wobble. What is this? Report Ad. Because of the reduced wobble, the switches then sound much better and have a thocc sound.

What are the best linear switches?

Are red or blue switches better?

The best switch ultimately comes down to personal preference. If you like the classic, clicky sound and feel, you'll love blue mechanical switches. If speed is a consideration, stick to linear (red) switches, and for a mix of both, go with brown.

What are the loudest keyboard switches?

The Blue switches are the loudest, but if you want a slightly quieter click, the Whites are an excellent option as well. The White switches are also slightly heavier, so if you type with a heavy hand, they can help protect you from bottoming out on each keystroke.