What is a code zero sail?

The Code Zero is a cross between a genoa and an asymmetrical spinnaker that is used for sailing close to the wind in light air. Code Zero was initially an attempt to circumvent a rating rule by making a large genoa for close reaching on boats that were measured with non-overlapping genaos.

What is the difference between a code 0 and a gennaker?

Code zero is another name for a gennaker.

The term gennaker can cover a code zero, screecher, or reaching spinnaker. Gennaker is just a general term for a potential downwind sail, a cross between a Genoa and an asymmetrical spinnaker. It's a marketing term.

What are sail codes?

Code Zero, Code 65, and Code 55

Code 65 and Code 55 are named for the geometry of the sail; the number specifies the ratio between foot and mid-girth. For a sail with a foot of 10 meters, a Code 55's mid-girth will be about 5.5 meters, while a Code 65's mid-girth will be around 6.5 meters.

What is a code 1 sail?

While the Code 1 is designed for light air vmg sailing it is also the sail of choice any time you are sailing a course that requires you sail on a reach with the apparent wind less than 90 degrees and when it is light enough to sail with a full size sail.

What does code zero mean?

The 4 x 60-minute series explores the alarming rise in police 'Code Zero' callouts – the radio call issued by officers who need urgent assistance, often when they are under attack or their lives are in danger.

Code Zero Sailing

Can you pole out a gennaker?

Spinnakers and asymmetricals are great for ticking off miles when sailing downwind, but they can be a chore to handle shorthanded. They require constant trimming, and there's always the possibility of a crash gybe or a knockdown.

What is a Yankee sail?

Noun. yankee (plural yankees) (nautical) A headsail resembling a genoa or a jib but with a high-cut clew, normally used together with a staysail. A sailing boat is typically equipped with three yankee sails of different sizes, number one being the largest.

What is an A2 sail?

A2 Light/Medium Runner - Racing spinnakers

The A2 is the go-to sail on most boats. Sprit boats never run dead down wind because the asymmetrical spinnaker gets blanketed behind the main sail if they sail below 155 degrees TWA.

What is a drifter sail?

Drifters are a hybrid designed specifically for cruising sailors. Its wind range is from 1-15 knots when the apparent wind angle is 30-90 degrees. It can be used on a run when set wing-and-wing with a whisker pole. A Drifter is even easier to use than a cruising spinnaker since the sail has the same profile as a genoa.

What makes up for the cable in a cable free code zero sail?

The Cable Free Code Zero has significant performance advantages. Made from Elvstrom's EPEX laminate membrane, which is fully guaranteed, it has strengthening yarns in the load lines enabling the sail to be furled, without a heavy cable.

What are codes for build and sail?

Working Build and Sail Codes

These are secret OP and active codes to use right away. 5000LikesThx – Redeem this code to get free Wood and Plastic rewards. Fuzion – Redeem this code to get free Metal, Wood, Plastic and Money. HeadStart – Redeem this code to get free Metal, Wood, Plastic and Money.

What is the difference between a cruising chute and a gennaker?

A cruising chute is primarily the same as a gennaker or asymmetric spinnaker. However, cruising chutes tend to be a little easier to handle than a racing asymmetric sail and in many cases they are more modest in size and are cut a little more conservatively.

What is the difference between a gennaker and a spinnaker?

In short, a gennaker has a genoa's form (asymmetric, head and tack pinned, sheets tied to the clew) with the wide girth of a spinnaker. The gennaker is an all-purpose downwind sail, while spinnakers are built for specific downwind apparent wind angles.

What's the difference between a jib and a genoa?

A jib is a foresail (headsail) that does not extend aft beyond the mast; a genoa, on the other hand, is larger and will overlap the mast and part of the mainsail. A jib sail is used for strong winds and is easy to handle, while the genoa is perfect for downwind sailing in light winds.

What is an A4 sail?

A4 Heavy Runner - Racing spinnakers

This sail has a powerful running shape, but is about 10% smaller than the A2, having narrower girths and shorter foot length. A4's are made out of heavy cloth to keep the sail bulletproof, which it needs to be for times that the sail will collapse and then snap full.

Does an asymmetric spinnaker need a pole?

The asymmetric spinnaker does not require a pole as such and therefore requires no pole up, pole down or guys to trim it. However, most asymmetrical kites have their tack set to a small pole at the bow known as a bowsprit. The tackline is attached to the tack and is adjustable.

What is asymmetric spinnaker?

What is an Asymmetric Spinnaker? Asymmetric spinnakers are more triangular in shape than a symmetric spinnaker and have three distinct corners: head, clew, and tack. The head attaches to the halyard. The tack fastens to a tackline, which is attached to the forward end of a fixed pole or sprit at deck level.

What is a Ballooner sail?

Definition of balloon sail

: a large light sail (such as a spinnaker) set in addition to or in place of an ordinary light sail especially by yachts in moderate weather.

What is the largest sail on a ship called?

The lowest and normally largest sail on a mast is the course sail of that mast, and is referred to simply by the mast name: Foresail, mainsail, mizzen sail, jigger sail or more commonly forecourse etc.

What is the most efficient sail shape?

The square rig is aerodynamically most efficient when running (sailing downwind). A fore-and-aft rig consists of sails that are set along the line of the keel rather than perpendicular to it.

What are the three corners of a sail called?

Head – In a triangular sail, the corner where the luff and the leech connect is called the head. On a square sail, the top corners are head cringles, where there are grommets, called cringles.

What is an asymmetric sail?

The asymmetrical spinnaker is a specialty sail used on racing boats, bridging the performance gap between a genoa, which develops maximum driving force when the apparent wind angle is between 35 and 60 degrees, and a spinnaker, which has maximum power when the apparent wind is between 100 and 140 degrees.