What do you do after you shock your pool?

Answer: After shocking the pool, it will need filtration and circulation. Run the pump as much as possible. Keep the filter clean (daily) until the water runs clear. Be sure to brush the pool often during this process as above-ground pools do not have drains at the bottom.

How long do you have to wait to get in after you shock a pool?

After you shock the pool — As soon as your chlorine levels reach 5 ppm or lower, it's officially safe to swim. Depending on the type of shock used, as well as the amount used, it can take anywhere from 24 hours or even up to a couple of days.

How long should I run my pool pump after shocking?

It is a question a lot of pool owners have and a question that we have the answer to! A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water.

Do you have to vacuum after you shock a pool?

As mentioned, you should vacuum your swimming pool as much as possible to keep the job manageable. However, after shocking the pool, you shouldn't vacuum for at least 24 hours. Running the water pump during this period will allow the shock to do its job.

What happens if you swim in a shocked pool?

What Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.

How Often Should You SHOCK Your POOL? | Swim University

Should I change filter after shocking pool?

After shocking a pool, it is recommended that the filter be run for at least 6 hours. So that the filter can clear the water and the shock can fully mix with the water, we do this after the shock has been added. If your pool has a lot of algae, you'll need to run the filter for 24 hours to 7 days after shocking.

Is it OK to run pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.

What time of day is best to run pool pump?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.

Can you swim 6 hours after shocking pool?

For chlorine based pool shocks (calcium hypochlorite, bleach and liquid chlorine), it will be safe to swim in 6 hours and up to 5 days after shocking. It's more important to wait until chlorine levels are below 5 ppm before swimming and the pH is from 7.2 to 7.8, rather than an elapsed time.

Can I shock my pool during the day?

The best time of day to shock pool is when the sun is down. So, experts recommend shocking your pool in the evening or at night, to make sure it does its job. Shocking during the day can be ineffective as UV rays from direct sunlight significantly reduce free chlorine levels.

Why did my pool get cloudy after I shocked it?

High doses of chlorine, like pool shock, can cause temporary cloudiness as it kills contaminants. High levels of pH, alkalinity, and calcium hardness are more likely to cause cloudy water.

Can you swim with pool pump on?

Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.

Should I turn off pool pump when raining?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.

What speed should I run my pool pump?

If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.

Should I turn off my pool pump at night?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

How often should you vacuum pool?

In general, it's a good idea to vacuum your pool once a week. You should also vacuum your swimming pool any time you notice large amounts of debris, dirt, or leaves on the floor of the pool (for example, your pool may need vacuuming after a heavy storm).

Should I leave pool filter on all the time?

Many variables determine how much time you need to run the filtration system, including the size of the pool and how you use it. But the bottom line is 100 percent of your pool's water must filter through the system at least once a day — something called turnover rate.

Can I swim 12 hours after shocking pool?

Can I swim 12 hours after shocking the pool? It's usually safe to swim after letting the shock circulate in the water for at least 8 hours. However, we recommend testing the water's chlorine level before swimming. A high chlorine reading may be uncomfortable and dangerous to swimmers.

Should you backwash after shocking?

Steps for Preventing Algae

If your pool is used frequently, shock it at least once a week. Clean or backwash your filter regularly. Run your pool pump for at least 10 hours per day to completely circulate the water. Keep your phosphate levels below 100 ppb (parts per billion).

Do you need to shock pool every week?

How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.

Should I add shock or chlorine first?

Low chlorine levels often cause green or hazy water, so if your water looks a little cloudy and you haven't shocked in a while, adding shock is the first step. It is always best to shock the pool in the evening, when the sun if off the water.

What chemicals should I balance first in my pool?

Total Alkalinity (TA) is the first thing you should balance in your pool water. TA refers to the amount of alkaline material in the water. And since alkaline is a pH stabilizer, the number of alkaline substances in water will affect the pH balance. The ideal Total Alkalinity range for pool water is 80 – 120 ppm.

What's the difference between shock and chlorine?

Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.

Should I run my pool pump during the day or night?

It is best to run your pool's pump during the day when the sun is out to reduce the risks of algae bloom and because there is generally more debris and contaminants that will enter your pool in the day.