Is 400 ft lbs of torque a lot?

Having 400 pounds of torque down low means you have more horsepower down low. Having 400 pounds of torque up high means you have even more horsepower then you had down low.

What is a good amount of torque for a car?

Engines in mainstream cars and trucks typically generate 100 to 400 lb. -ft of torque. That torque is created by the pistons within an engine as they reciprocate up and down on the engine's crankshaft, causing it to rotate (or twist), continuously.

Is 400 Nm torque good for a car?

If you need a car to tow a trailer or caravan, you'll need the extra strength of a high torque engine that will help pull the extra weight. It's worth noting that engines producing much more than 400 Nm (295 lb/ft) of torque, whether petrol or diesel, are usually at their best teamed with an automatic gearbox.

What does it mean to have a large torque?

"Torque" is a way of describing how hard something is turned or twisted, in the same way we talk about "forces" as something that pushes or pulls. If we want to move a heavy box across the floor, we need a large force to push it. In the same way, if we want to turn a rusty bolt we will need a large torque.

What does ft lb of torque mean?

So, first thing first: torque is a measure of force. It's measured in pound-feet (lb-ft). So, one pound acting on a lever one foot away from an axle will be one lb-ft of torque.

HORSEPOWER VS TORQUE SIMPLEST EXPLANATION

Is 300hp enough?

Right between 200 and 300 horsepower is the sweet spot for many drivers. Be cautious with models that approach 300 horsepower, unless the vehicle is a heavy truck or another large model.

Is it better to have more torque or horsepower?

Basically, the faster the crankshaft spins with the same amount of force, the more power an engine will make. A car with more hp than torque will always be quicker since this gives a car acceleration and speed.

How much torque do I need?

To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.

What does torque feel like?

In very simple terms, torque is the force you feel pushing you back in your seat on acceleration, while horsepower is the speed achieved at the end of that acceleration.

What car has the most torque?

Does more torque mean faster acceleration?

So the more torque your car has, the greater the acceleration. Torque is a crucial part of generating power from a car's engine, as it represents the load an engine can handle to generate a certain amount of power to rotate the engine on its axis.

Is power more important than torque?

Well, if you just want to go fast and hit 140 mph, then horsepower would be more effective for you. However, if you want a strong car that can pull boulders and take off quickly, a high torque might be more important to you. In short, torque makes your vehicle quick. Horsepower makes it fast.

How much torque does a train have?

Traction. Traction when going around turns is not an issue because train wheels have flanges (projecting rims around the wheels) that keep them on the track. But traction when braking and accelerating is an issue. A locomotive can generate more than 60,000 lb-ft of torque.

Is a lot of torque good?

Whether you go for a manual or automatic gearbox, lots of low-end torque means you'll be able to hit the gas to get up a hill without shifting down. This makes for an easier drive but it also means you'll be able to accelerate quickly where you need to.

Is torque good for going uphill?

So unfortunately, the torque doesn't tell you how hard it will be to go up a hill. Power would be better, but this too doesn't really answer the question either, because less power doesn't mean a hill can't be climbed, it just means you'll climb slower because it takes more time to produce the required energy.

What is low-end torque?

Low-end torque is the amount of torque at a low number of revs, usually between 2000 and 3000. This is different from high-end torque which is the amount of torque at a high revolution such as 4000 or 6000.

Is 150 hp good for a car?

Right between 200 and 300 is a good amount of horsepower for a car. Many base models from some brands offer between 100 and 200 horsepower, suitable for drivers who do not mind a more relaxed driving experience in exchange for a better economy.

How does a high torque car feel?

In a car with a lot of torque, acceleration will feel effortless because the engine won't feel as if it's working that hard to help the car build speed.

What is good horsepower for a SUV?

The Typical Horsepower of a Car

Bigger SUVs and trucks might offer 200hp and smaller cars have around 70hp engines, on average.

What is a normal torque?

What is it normal to? A torque is always parallel to the axis of rotation, so every torque is just as normal as any other torque. The closest thing to this would be if you applied a torque to a fixed object.

What is a good torque for an impact driver?

Recommendation. Generally speaking, an impact driver with 1500–1800 in-lbs of torque puts more emphasis on higher RPM. It will do 95% of the work more quickly than a tool with more torque and slower speeds. Our rule of thumb is that, if you need to reach for a socket adapter, you're better off grabbing an impact wrench ...

Is 300 ft lbs enough to remove lug nuts?

Realistically, the answer is no. A quick glance at a lug nut torque chart shows that most lug nuts should be torqued between 80 and 100 ft-lbs. Some require less torque, others more.

How much torque do I need to tow a trailer?

You divide F towing demand by 1.5 to gat torque at wheels, then you divide that by gear ratio, say 3.6 to get engine torque required to tow your trailer.

What is torque in cars in simple terms?

Torque is a rotating force produced by an engine's crankshaft. The more torque an engine produces, the greater its ability to perform work. The measurement is the same as work, but slightly different. Since torque is a vector (acting in a certain direction), it's quantified by the units pound-feet and newton-meters.

What is good acceleration for a car?

For modern cars, 0-60 in 6.6 seconds is decent. A lot of people complain about the BRZ/FR-S/GT86 having slow acceleration, but it does 0-60 in the same time as your car. 6.