How much should I charge to tape and mud drywall?

The average cost to tape and mud drywall is $0.35 to $1.10 per square foot, not including sanding or the final finish to prime the surface for paint. Taping and mudding drywall joints for a standard 12' x 12' bedroom costs $180 to $580.

How much do drywall tapers charge per square foot?

The Long Answer: The cost of finishing drywall is typically in the range of $1.00 to $1.65 per square foot, not including labor.

How do you calculate drywall mud and tape?

If you're using a lightweight joint compound (not premixed), then you'll probably need 0.053 pounds of mud per square foot of drywall. If you're using a quick-setting product, then you'll likely need 0.073 pounds of mud per square foot. Drywall tape typically covers about 2-3 square feet of sheetrock per foot of tape.

What do drywall finishers charge?

Calculating the Cost to Finish Drywall Per Square Foot

Your labor costs will start at around $1.00 for every square foot, and this can go up to $2.50 per square foot, depending on the level of finish and the job size.

How much does it cost to tape and texture drywall?

Cost to Tape and Texture Drywall

The total cost of installing drywall includes the cost of the drywall panels and materials, as well as the labor cost to hang, tape, finish, and texture drywall. Most homeowners spend $3.25 per square foot to install, tape, and texture.

How The Drywall Doctor Prices Jobs From Materials to Labor

How much do I charge to texture walls?

The cost to texture walls and ceiling is $0.80 to $2.00 per square foot, which is $450 to $1,000 per bedroom and $600 to $1,400 for a living room. Retexturing walls cost $1.80 to $3.80 per square foot, including old texture removal. The cost to smooth textured walls is $1 to $3 per square foot.

How do you bid drywall per square foot?

Measure the total square footage of the areas where the drywall will be installed. Multiply the width times the height of each wall or ceiling area, then add all of the quantities together to get a total square-foot amount.

How do you finish a drywall bid?

To determine how many pieces you will need, take the total square footage of the walls and ceilings that need drywall (let's say it's 650 sq. ft.) and divide it by either 32 or 48. 650/32=20.31, or 21 sheets of drywall.

How do you calculate drywall?

How much does it cost to drywall a 2000 square foot house?

For example, a house with 2,000 square feet of floor space and eight foot high ceilings may require anywhere between 8,000 and 9,000 square feet of drywall.

How do you find a square foot?

Measure the length and width, in feet, of each room. Then, multiply the length by the width to calculate that room's square footage. For example: If a bedroom is 12 feet by 20 feet, it is 240 square feet (12 x 20 = 240).

How much does it cost to smooth walls?

Contractors tend to charge an upfront cost of $100 for smoothing out textured walls and ceilings. They also charge around $1 to $3 per square foot. That's because it takes a lot of time to remove textured walls depending on the texture in question.

How much does it cost to mud and tape drywall per square foot?

The average cost to tape and mud drywall is $0.35 to $1.10 per square foot, not including sanding or the final finish to prime the surface for paint. Taping and mudding drywall joints for a standard 12' x 12' bedroom costs $180 to $580.

How do you price drywall work?

Minus material and finishing costs, drywall labor cost per square footage generally equates to a price of $0.50 to $0.75 per square foot.

How do you write a drywall proposal?

How many screws should go in a sheet of drywall?

How Many Screws Per Sheet of Drywall. Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.

How much does it cost to smooth a ceiling?

Expect to pay about $30 to $200 in materials to do this yourself, or about $1 to $3 per square foot for labor and materials if you hire a professional. The average homeowner spends about $1,675 nationwide.

How much does it cost to skim coat a ceiling?

Hiring a Contractor. Skim coating a room yourself costs you about $50 in materials and $430 in tools if you don't have the tools already. Hiring a local drywall contractor is usually $50 to $100 per hour, and the average room takes four to six hours to complete—totaling a labor cost of about $200 to $600.

How do you charge for framing?

Residential Framing Costs Vs.

While residential framing costs range between $7 - $16 per square foot, commercial framing is more expensive. The average commercial framing job ranges from $12 to $40 per square foot. In addition, most commercial buildings use steel rather than wood, attributing to the cost differences.

How much does it cost to finish a 1500 sq ft basement?

Finishing a basement typically costs between $7 and $23 per square foot with an average of $25 per square foot. Most homeowners can expect to pay from $2,800 to $33,985, or $18,395 on average, for a 400 to 1,500 square foot space. The price includes labor, materials and any permits you need.

How many sq. ft is 12x12?

The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).

How do painters calculate square footage?

Painters calculate the square footage by multiplying the length of each room in your home by their corresponding width to determine the total amount of square footage in a particular space.