Can you flush copper sulfate down the toilet?

The most advisable way to use copper sulfate is by placing it in a toilet bowl in regular small doses of about 1/2 a cup and flush the toilet a couple of times to ensure it flows through the house drain. Never place the copper sulfate into a sink or shower – it may harm the plumbing.

Can you put copper sulfate down the drain?

Flush Copper Sulfate Crystals Down the Drain

To do so, pour half a cup of copper sulfate crystals into your toilet — but not your sink or shower, as the crystals will erode the pipes and cause leaks — and flush it down the drain.

How much copper sulfate should I put in my toilet?

Pour copper sulfate crystals of medium size into the commode or toilet stool in small amounts, about 1/2 cup at a time, followed by successive flushing of water until the crystals are carried outside the dwelling into the sewer line.

How do you dispose of copper sulfate?

Will copper sulfate kill roots in sewer line?

Copper sulfate crystals can be found at your local hardware store or garden supply center. These crystals can be used to kill roots inside the sewer lines – by pouring one-half cup of crystals into your toilet, they can travel along the pipes until they come to the obstruction.

Sewage Drain and Sewer Line Tree Root Destroyer - Copper Sulfate Pentahydrate Instructions

Does copper sulfate harm septic systems?

Never put copper sulfate into a septic system through a sink or tub because the copper will corrode the metal pipes. Instead, apply it through the toilet.

How long does it take copper sulfate to dissolve roots?

It can take as little as two or three days to clear out the line. However, if your system has a slower flow of water, it can take a bit longer (up to a week) to get rid of the roots. By contrast, copper sulfate takes up to four weeks to even start the process of root decay.

What happens when you mix copper sulfate and water?

When water is present in a sample of copper(II) sulfate it turns blue. It is still a dry solid, because the individual water molecules are trapped within the ionic lattice surrounding the copper(II) ions.

Is copper sulfate harmful to humans?

Copper sulfate can cause severe eye irritation. Eating large amounts of copper sulfate can lead to nausea, vomiting, and damage to body tissues, blood cells, the liver, and kidneys. With extreme exposures, shock and death can occur.

How long does it take for copper sulfate to work?

The treatment will likely cause a sudden, algal die-off causing an oxygen depletion that could result and the dead algae decay and the fish will suffocate. Treating only one third of an area at over 48-72 hours will help avoid crashing your oxygen levels.

Will copper sulfate damage pipes?

Considerations. Copper sulfate damages metals such as iron, brass and chrome, so keep copper sulfate away from those metals. In addition, never use copper sulfate more than twice a year. The more you use the crystals, the more likely damage will occur to the pipes.

What dissolves roots in pipes?

Copper sulfate is a natural herbicide and will kill off the small tree roots invading your sewer pipes. Flushing half a cup of the crystals down the toilet should do the trick.

How often should I use copper sulfate?

Application by Slug Method: Make a dump of Copper Sulfate into the irrigation ditch or lateral at ¼ to 2 pounds per second of water per treatment. Repeat about every 2 weeks as needed. A dump is usually necessary every 5 to 30 miles depending on water hardness, alkalinity, and algae concentration.

How long does it take for copper sulfate to dissolve in water?

In hard or alkaline waters, copper sulfate tends to settle to the bottom within 24 hours after application. Chelated copper remains in solution longer, allowing for a longer contact time with the algae.

What can copper sulphate be used for?

Uses: Copper sulfate is used as a fungicide, algaecide, root killer, and herbicide in both agriculture and non-agricultural settings. It is also used as an antimicrobial and molluscicide. Uses for individual products containing copper sulfate vary widely.

How do you clean roots out of a sewer line?

Try Copper Sulfate. Copper Sulfate is also effective in killing roots in your sewer line pipes. You can get it at your local hardware store. Just pour about half a cup down the toilet and flush as many times as needed to wash it off.

What happens if you smell copper sulfate?

Health Hazards

Copper sulfate is a severe eye irritant and can cause substantial damage to the eyes. If inhaled, the dust can cause respiratory irritation. Copper sulfate should not be ingested. Doing so will cause serious diarrhea and vomiting.

Is copper sulphate a poison?

Copper sulphate ingestion (accidental or deliberate) is a rare form of poisoning usually limited to the Indian subcontinent. Though the rates are on the decline, it is essential that physicians are aware of its lethal complications and management strategies.

How much water do you mix with copper sulfate?

Liquid Copper Sulfate

Some liquid forms can be applied directly to the water, but the University of Florida IFAS Extension recommends diluting it to avoid using too much of it in one place. Typically, use 1 gallon of liquid copper sulfate diluted in 10 gallons of water per one surface acre of your pond.

What is the ratio of copper sulfate to water?

A mole of CuSO4•5H2O contains 5 moles of water (which corresponds to 90 grams of water) as part of its structure. Therefore, the substance CuSO4•5H2O always consists of 90/250 or 36% water by weight.

Do root killers work in sewer lines?

Using tree root killer can be a simple fix to stop clogs, but sadly, it won't repair the cracks in your pipe. If your sewer issues persist even after applying tree root killer, it's time to call in the pros.

How often should I use root killer in my pipes?

How often do I need RootX treatments? You should treat your sewer lines or septic system every year. Ask your plumber to send in the RootX registration card, and we'll send you a reminder after 11 months that it's time for your annual RootX treatment.

How do you use copper sulfate in a toilet?

The most advisable way to use copper sulfate is by placing it in a toilet bowl in regular small doses of about 1/2 a cup and flush the toilet a couple of times to ensure it flows through the house drain. Never place the copper sulfate into a sink or shower – it may harm the plumbing.